Android Rooted?

[MrWizerd]

Finally got around to burn the rooted image, and it works (allmost) perfectly.
The reason i say "allmost perfectly" instrad of "perfectly" is because of one small issue.
I'm not able to turn on the BT/enable BT.
This is critical for my use of the pine, so i must admit I'm quite dissapointed with this bug.

For the record I am building a (retro) gaming station and havr been waiting for proper root access since the first build of android. The reason I need the BT if to be able to use my two PS4 controllers with the Pine (needs both rooted android and BT connection).

Does any one else have the same issue with the BT?
Would I get around this if I buy a usb-BT dongle?

Wish I had better news for you, but currently I don't have the WiFi/Bluetooth module.  Once the store opens up I will be ordering one.  There was a post earlier that said they were also having trouble.  I tried to install a usb bt dongle to see if by chance it would recognize it but no luck there.  The only other bluetooth module i have is one for coms on arduino it is a cheap bc417 module on a breakout board with six pins to connect, I can match the tx and rx pins but after that I don't have any clue what would connect were and it is a moot point because the pinout on the wiki numbers the pins 1 to 26 instead of 1 to 14 and 1 to 16 respectively.  The pinout shows 13 to each side, but I suspect that since the Wifi/bt card is one unit that they are wired only for the single unit and not to split the power between separate wifi and bt cards.  SO instead of trying to rig something that might work to test, I couldn't with what I have and the pinouts I have.  FURTHER if I did manage to get the BT Module connected correctly and it still didn't work there would be no way of telling if it was the install or the card or the software or all three or any other combination or problem I have not thought of.  I do suspect that once the shipping craze is doen we may see a lot more development from the pine group so we will get there... 

  Have you thought about using wired controllers and a USB hub?  I will have to test the controller  I have both a wired ps3 and xbox controller.   I will test it with the emulators I have, which is all of them  and post back in this post with an edit unless you respond before then.

I had a lot of info added then hit the previous button when I boggled the phone. Anyways the controller work, is the only reason you want be controllers because you already have them? I connected my ps3 controller to my phone and I had to manually set the address then return it to default to move it back to the console, do you have a work around? I know a bit about what you're trying to do, if you want to pm me I may be able to get you up without bt until it's fixed.