10-17-2020, 11:41 AM
How do I flash the modebian image to the emmc on the pinephone?
How to flash modebian to emmc
|
10-17-2020, 11:41 AM
How do I flash the modebian image to the emmc on the pinephone?
10-17-2020, 11:49 AM
(This post was last modified: 10-17-2020, 11:50 AM by m.alizade7.)
(10-17-2020, 11:41 AM)maybl8 Wrote: How do I flash the modebian image to the emmc on the pinephone? Flash the Jumpdrive 0.5 on your SD. Insert the SD in your PP and turn it on. You'll see an image of Jumpdrive and connect your cable with your Laptop/pc. Now your PP (Emmc) will be mounted. Select the emmc to flash your image. Good luck! Link Jumpdrive: https://github.com/dreemurrs-embedded/Ju...e/releases
10-17-2020, 11:51 AM
(10-17-2020, 11:41 AM)maybl8 Wrote: How do I flash the modebian image to the emmc on the pinephone?Check out https://wiki.pine64.org/index.php/PinePh...structions and try with jumpdrive. Verstuurd vanaf mijn Wileyfox Swift met Tapatalk
10-17-2020, 01:29 PM
Ok I got this. Thanks for the help.
I have to flash the jump drive to a sdcard . Boot to the sdcard. Then I can flash the image from my computer hard drive to the emmc. Then I can take out the sdcard and it boots to the emmc. I decided to use the modebian image because it actually works with my phone. I can make and receive calls and use the internet . I have a t-mobile sim that works with the phone.
10-20-2020, 10:26 AM
(10-17-2020, 01:29 PM)maybl8 Wrote: Ok I got this. Thanks for the help.Yes
|