How to flash modebian to emmc - Printable Version +- PINE64 (https://forum.pine64.org) +-- Forum: PinePhone (https://forum.pine64.org/forumdisplay.php?fid=120) +--- Forum: PinePhone Software (https://forum.pine64.org/forumdisplay.php?fid=121) +---- Forum: Mobian on PinePhone (https://forum.pine64.org/forumdisplay.php?fid=139) +---- Thread: How to flash modebian to emmc (/showthread.php?tid=11853) |
How to flash modebian to emmc - maybl8 - 10-17-2020 How do I flash the modebian image to the emmc on the pinephone? RE: How to flash modebian to emmc - m.alizade7 - 10-17-2020 (10-17-2020, 11:41 AM)maybl8 Wrote: How do I flash the modebian image to the emmc on the pinephone? Flash the Jumpdrive 0.5 on your SD. Insert the SD in your PP and turn it on. You'll see an image of Jumpdrive and connect your cable with your Laptop/pc. Now your PP (Emmc) will be mounted. Select the emmc to flash your image. Good luck! Link Jumpdrive: https://github.com/dreemurrs-embedded/Jumpdrive/releases RE: How to flash modebian to emmc - davidbe - 10-17-2020 (10-17-2020, 11:41 AM)maybl8 Wrote: How do I flash the modebian image to the emmc on the pinephone?Check out https://wiki.pine64.org/index.php/PinePhone_Installation_Instructions and try with jumpdrive. Verstuurd vanaf mijn Wileyfox Swift met Tapatalk RE: How to flash modebian to emmc - maybl8 - 10-17-2020 Ok I got this. Thanks for the help. I have to flash the jump drive to a sdcard . Boot to the sdcard. Then I can flash the image from my computer hard drive to the emmc. Then I can take out the sdcard and it boots to the emmc. I decided to use the modebian image because it actually works with my phone. I can make and receive calls and use the internet . I have a t-mobile sim that works with the phone. RE: How to flash modebian to emmc - dukla2000 - 10-20-2020 (10-17-2020, 01:29 PM)maybl8 Wrote: Ok I got this. Thanks for the help.Yes |