PinePhone CE and USB-C Video Out
#1
I had recently seen the video by megi tweeted by pine64 of the pinephone displaying on a monitor, but there was no mention of the phone having a hardware mod.
https://twitter.com/thepine64/status/127...7726109696

Later I discovered on the wiki page that there was a hardware quirk that was discovered after the production of the CE version.
https://wiki.pine64.org/index.php?title=PinePhone_v1.2

A workaround is to desolder to switches.
https://wiki.pine64.org/index.php?title=...ONN_is_off
https://xnux.eu/devices/pine64-pinephone.html

But apparently this causes another issue when using a USB-C hub: "SD card reader not enumerating on PP with removed VCONN switches"
https://wiki.pine64.org/index.php/PinePh...patibility

So I have a couple of questions. I ordered my pinephone on may 21 with DHL shipping. I have not yet received DHL notification e-mail.
Do the shipped pinephones all have this hardware quirk?
Should I cancel my order and wait for a new pinephone revision?
Will there even be another revision?

I would really like to know, because I was really looking forward to this feature and cannot afford to buy more than one pinephone.
#2
The docs say the quirk was discovered after the CE production had started, so versions .10, 1.1 (BH) and 1.2 (CE) appear to have it. That covers all Pinephones produces do far, at least as far as we outsiders know. I would expect there to be another production run at some point with a revised main board to fix this and any other problems discovered in the meantime. How long this will take is anyone's guess. It's worth keeping in mind that the parts of the phone, including main board, have been made available for order as spare parts once the phones have shipped, so a fix will cost less than a whole new phone. If you're not prepared to live with hardware quirks/bugs like this then you're probably better to wait for them to be fixed in another revision or two.
#3
(06-13-2020, 11:22 AM)Rockimo Wrote: I had recently seen the video by megi tweeted by pine64 of the pinephone displaying on a monitor, but there was no mention of the phone having a hardware mod.
https://twitter.com/thepine64/status/127...7726109696

Later I discovered on the wiki page that there was a hardware quirk that was discovered after the production of the CE version.
https://wiki.pine64.org/index.php?title=PinePhone_v1.2

A workaround is to desolder to switches.
https://wiki.pine64.org/index.php?title=...ONN_is_off
https://xnux.eu/devices/pine64-pinephone.html

But apparently this causes another issue when using a USB-C hub: "SD card reader not enumerating on PP with removed VCONN switches"
https://wiki.pine64.org/index.php/PinePh...patibility

So I have a couple of questions. I ordered my pinephone on may 21 with DHL shipping. I have not yet received DHL notification e-mail.
Do the shipped pinephones all have this hardware quirk?
Should I cancel my order and wait for a new pinephone revision?
Will there even be another revision?

I would really like to know, because I was really looking forward to this feature and cannot afford to buy more than one pinephone.
If you decide you don't want it because of this issue 1. would you be willing to sell? and 2. if so are you located in the US? If not no big deal just figured I'd throw the idea out. It never hurts to ask  Smile
#4
I'm not in the US and I think I'm gonna keep the phone because I need a new one anyway. As wibble suggested I'm just gonna order new parts once there is a new revision.

Thanks for the suggestions guys.
#5
(06-13-2020, 04:15 PM)Awesomesauce71 Wrote: If you decide you don't want it because of this issue 1. would you be willing to sell? and 2. if so are you located in the US? If not no big deal just figured I'd throw the idea out. It never hurts to ask  Smile

I'm in the same boat as OP -- didn't realize the drivers needed for video out weren't already in the kernel, and now the hardware issue, and I'm primarily interested in convergence. As it is I've barely used it. It's a BH device and I'm in Utah. If you're interested I'd be happy to let it go at cost and I'll pick up the shipping since it's technically used.
#6
(06-14-2020, 02:21 PM)whiteinge Wrote:
(06-13-2020, 04:15 PM)Awesomesauce71 Wrote: If you decide you don't want it because of this issue 1. would you be willing to sell? and 2. if so are you located in the US? If not no big deal just figured I'd throw the idea out. It never hurts to ask  Smile

I'm in the same boat as OP -- didn't realize the drivers needed for video out weren't already in the kernel, and now the hardware issue, and I'm primarily interested in convergence. As it is I've barely used it. It's a BH device and I'm in Utah. If you're interested I'd be happy to let it go at cost and I'll pick up the shipping since it's technically used.
Thanks for the offer but someone already sold me one. Thanks for the offer anyway.
#7
This hardware bug is not really a big deal; it just prevents automatic detection of the USB state as discussed in another thread:
https://forum.pine64.org/showthread.php?tid=10255. As a workaround, you will have to switch the USB state manually in software and it should work.
#8
(06-16-2020, 10:58 AM)fsflover Wrote: This hardware bug is not really a big deal; it just prevents automatic detection of the USB state as discussed in another thread:
https://forum.pine64.org/showthread.php?tid=10255. As a workaround, you will have to switch the USB state manually in software and it should work.
That's great, I can live with that.
#9
What software do I use to switch the USB state?
#10
(06-17-2020, 08:46 AM)heng Wrote: What software do I use to switch the USB state?
Not much, it's not possible to workaround this in software. ANX firmware malfunctions if CC pins don't behave as expected, and there's no way to communicate with the dock to enable alt-dp mode. There's no manual override.


Possibly Related Threads…
Thread Author Replies Views Last Post
  PinePhone - boot from microSD laserpyramid 5 298 03-06-2024, 06:37 PM
Last Post: aular
  Are you using the Pinephone as your daily driver? jro 157 105,055 02-18-2024, 11:33 PM
Last Post: aular
  2020 PinePhone Manjaro CE EU for sale, name your price astrojuanlu 7 1,519 02-14-2024, 04:51 PM
Last Post: astrojuanlu
  pinephone is not bootble for the box. ijij 1 458 01-19-2024, 01:29 PM
Last Post: fxc
  Multiple issues with the Pinephone MTXP 12 1,936 12-28-2023, 07:55 AM
Last Post: MTXP
  pinephone repair shop shengchieh 0 380 12-26-2023, 02:42 PM
Last Post: shengchieh
  sudo nano file saving pinephone beta edition CharlesGnarley 4 1,475 12-22-2023, 03:44 PM
Last Post: Kevin Kofler
  Can't get Mobian on PinePhone to recognise USB-C docking bar duncan_bayne 9 6,595 12-04-2023, 02:14 AM
Last Post: Peter Gamma
  Pinephone not booting, always vibrating alexander12 7 4,663 11-22-2023, 06:46 PM
Last Post: Scary Guy
  Pinephone on Verizon chachi 3 991 10-09-2023, 11:26 AM
Last Post: alaraajavamma

Forum Jump:


Users browsing this thread: 1 Guest(s)