RockPro64 won't boot.
#1
Just received my RP64, PSU, heatsink w/fan and (2) 64Gb SDHCs.
-- I Flashed Bionoc/LXDE with Etcher.
-- Connected the 12V/5A PSU, GRN power LED illuminates WHT LED illuminates.
-- Pressed power button for 1s, WHT LED turns off, RED LED blinks, and that's that. Nothing.
-- I've used Etcher to flash SDHCs for my Pi 3Bs and Odroid XU4 without any problems.
-- Looks like the SBC is dead. Sad
Q1: Does the fan spin up automatically or is it a PWM fan?
Q2: What to do from here?

TIA,
/Faradn
  Reply
#2
(03-26-2019, 06:34 PM)Faradn Wrote: -- Pressed power button for 1s, WHT LED turns off, RED LED blinks, and that's that. Nothing.

That turns it off, it automatically starts when power is applied.

Quote:Q1: Does the fan spin up automatically or is it a PWM fan?

The fan is controlled in software, check out this repo... https://github.com/tuxd3v/ats
  Reply
#3
Thanks.

-- Tried Bionic Minimal w/o pressing the PWR button.
-- No joy...same thing...no boot.
-- Tried the Armbian desktop image...no boot.
-- Just tried Ubuntu minimal on a new SDHC...no boot.
-- And yes, the SDHC contacts are facing up.

Q: So what am I missing here?

TIA,
/Faradn
  Reply
#4
(03-26-2019, 07:27 PM)Faradn Wrote: Thanks.

-- Tried Bionic Minimal w/o pressing the PWR button.
-- No joy...same thing...no boot.
-- Tried the Armbian desktop image...no boot.
-- Just tried Ubuntu minimal on a new SDHC...no boot.
-- And yes, the SDHC contacts are facing up.

Q: So what am I missing here?

TIA,
/Faradn


Are you connecting the rp64 to a monitor or tv (HDMI or dvi adaptor)?

Something is happening, as the white LED is software controlled, also it usually takes 3 to 5 seconds for something to come up on hdmi.

Finally what's the full URL of the bionic image.
  Reply
#5
-- Using an HDMI-VGA adapter; OK with both a Pi 3B and Odroid XU4.
-- Direct download from ayufan's github page:
http://wiki.pine64.org/index.php/ROCKPro...5B0.7.9.5D
-- Waited several minutes...nothing.

Oh well...time for an RMA...or credit on return.

/Faradn

This is so embarrassing...

The thermal pad for the heat sink/fan?
I applied it as one piece, no doubt shorting out some of the SBC's SMT devices.

RP64 on line!!

TIA,
/Faradn
  Reply
#6
(03-26-2019, 08:02 PM)Faradn Wrote: -- Using an HDMI-VGA adapter; OK with both a Pi 3B and Odroid XU4.

I have a dvi adapter to a monitor and suffer the same issue. To get round this issue I manually enter in the screen resolution.

Add the following to /boot/efi/extlinux/extlinux.conf at the end of the append line.

Code:
drm_kms_helper.edid_firmware=edid/1920x1080.bin
  Reply
#7
I would try the related armbian debian image. Connect only the power supply and the ethernet cable. After power on check your router's web interface to see if it assigned an ip address to it. Then try to connect through ssh to that ip and use the armbian standard credentials user: root password: 1234.

Sent from my MHA-L29 using Tapatalk
  Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  slarm64 (unofficial slackware) ROCKPro64 RK3399 (aarch64) mara 31 6,444 Yesterday, 09:03 AM
Last Post: mara
Thumbs Up Batocera for RockPro64 Luke 10 3,068 07-07-2020, 11:28 PM
Last Post: tllim
  Official Debian release won't boot!?! Faradn 4 278 07-06-2020, 09:29 AM
Last Post: Bullet64
  Arch Linux on RockPro64 mmatyas 30 11,883 05-30-2020, 12:08 PM
Last Post: mmatyas
  Rockpro64 panfrost installation questions user12321 2 250 05-27-2020, 10:17 AM
Last Post: xmixahlx
  RockPro64 Slow Ping on WiFi jl_678 0 98 05-14-2020, 05:08 PM
Last Post: jl_678
  RockPro64 Linux Manjaro HDMI 4K mkne 12 544 05-03-2020, 07:23 AM
Last Post: PakoSt
Question Mainline Debian Buster on RockPro64 ? chrestomanci 12 975 04-27-2020, 09:53 AM
Last Post: kuleszdl
  Mainline U-Boot with Arch Linux PKGBUILD mmatyas 0 185 04-17-2020, 03:49 AM
Last Post: mmatyas
  Call for test: Clonezilla live for Rockpro64 stevenshiau 1 358 04-17-2020, 12:38 AM
Last Post: tllim

Forum Jump:


Users browsing this thread: 1 Guest(s)