|
Unable to boot from SPI
|
06-29-2018, 06:16 AM
So I had flashed my SPI via SD card method, I waited until the LED goes blinking and turned off the device, and then I flashed my USB 3.0 drive to OMV with Etcher in Windows, and now it isn't booting at all! HDMI has no signal after I started the booting, neither was there any blinkings anymore, I have very limited hardware debugging skill and I simply want to know how to restore access to my Rock64, thank you.
06-29-2018, 06:38 AM
Strange. So I was able to access the OMV web panel in my bet to check the DHCP list of my router, but there was no visible HDMI output. I checked the cable is completely fine, I'm very confused right now...
07-22-2018, 07:26 AM
(06-29-2018, 06:16 AM)stevefan1999 Wrote: So I had flashed my SPI via SD card method, I waited until the LED goes blinking and turned off the device, and then I flashed my USB 3.0 drive to OMV with Etcher in Windows, and now it isn't booting at all! HDMI has no signal after I started the booting, neither was there any blinkings anymore, I have very limited hardware debugging skill and I simply want to know how to restore access to my Rock64, thank you. If you thinks is cause by SPI Flash implementation, you can ease SPI Flash using below link: http://wiki.pine64.org/index.php/NOOB#Er...riting_SPI
05-01-2019, 04:47 PM
(07-22-2018, 07:26 AM)tllim Wrote:(06-29-2018, 06:16 AM)stevefan1999 Wrote: So I had flashed my SPI via SD card method, I waited until the LED goes blinking and turned off the device, and then I flashed my USB 3.0 drive to OMV with Etcher in Windows, and now it isn't booting at all! HDMI has no signal after I started the booting, neither was there any blinkings anymore, I have very limited hardware debugging skill and I simply want to know how to restore access to my Rock64, thank you. I'm having the same problem after using the U-boot erase program. I also waited until the LED started a continuous blinking. I then turned the machine off and now can't read from the SPI. I had been using the USB for SSDs and µSD holders. Now there is no response ... ability to read anything. The Internet port also appears to be dead. I have a number of good builds, but the won't boot. |
| Possibly Related Threads… | |||||
| Thread | Author | Replies | Views | Last Post | |
| Rock64 won't boot | luminosity7 | 10 | 6,012 |
03-16-2024, 08:33 AM Last Post: dmitrymyadzelets |
|
| Rock64 doesn't boot | dstallmo | 1 | 741 |
03-16-2024, 08:29 AM Last Post: dmitrymyadzelets |
|
| Boot from SPI first | mjnck | 1 | 1,930 |
02-29-2024, 02:12 PM Last Post: reukiodo |
|
| ROCK64 v3 can it boot from USB? | Tsagualsa | 4 | 2,963 |
11-29-2022, 11:31 AM Last Post: Macgyver |
|
| Rock64 u-boot for eMMC Build Error | mexicanflyer | 0 | 1,395 |
09-18-2022, 02:29 PM Last Post: mexicanflyer |
|
| boot hdd usb3 | philipe | 1 | 3,054 |
01-27-2021, 02:12 PM Last Post: tllim |
|
| Libreelec Rock64 - 4GB no boot | spiker15 | 3 | 5,281 |
11-02-2020, 12:36 AM Last Post: wilsonYan |
|
| Rock64 - boot | helpmerock | 2 | 4,010 |
10-08-2020, 01:29 PM Last Post: helpmerock |
|
| No boot up after power on | Whoopsadaisy | 4 | 6,378 |
09-26-2020, 05:14 PM Last Post: simonsouth |
|
|
u-boot (forks) status | mcerveny | 14 | 17,418 |
08-27-2020, 01:44 PM Last Post: globaltree |
