How to use ROCKPro64 PCI-e X4 to M.2/NGFF NVMe SSD Interface Card

[jykeith123]

I connected a PCI NVMe adapter to the RockPro64, but nothing is added to 

Code:

/dev/sd*

 or 

Code:

/dev/nvme*

. The products I tested are as follows:


PM9A1 500GB
FireCuda530 2TB

What could be the problem?

os : Armbian_24.5.1_Rockpro64_noble_current_6.6.31

[wdt]

Well, I have a pci card and nvme drive.... so...
dmesg |grep pci should be almost a full page,
the last line mentions nvme
and dmesg |grep nvme should be 5-6 lines
Maybe the pci card is not compatible, OR it is not a nvme type of m2 drive
Cheaper m2 drives are nearly always SATA, this will NOT work