slarm64 (unofficial slackware) Quartz64 RK3566 (aarch64)
#21
working HDMI
slarm64-current-aarch64-server-quartz64-5.16.0-rc2-build-20211201.img.zst
slarm64-current-aarch64-server-quartz64-5.16.0-rc2-build-20211201.img.zst.sha256
slarm64-current-aarch64-xfce-quartz64-5.16.0-rc2-build-20211201.img.zst
slarm64-current-aarch64-xfce-quartz64-5.16.0-rc2-build-20211201.img.zst.sha256
donation   irradium

  Reply
#22
(12-01-2021, 12:52 AM)mara Wrote: working HDMI
slarm64-current-aarch64-server-quartz64-5.16.0-rc2-build-20211201.img.zst
slarm64-current-aarch64-server-quartz64-5.16.0-rc2-build-20211201.img.zst.sha256
slarm64-current-aarch64-xfce-quartz64-5.16.0-rc2-build-20211201.img.zst
slarm64-current-aarch64-xfce-quartz64-5.16.0-rc2-build-20211201.img.zst.sha256

testing now will let you know how it goes
  Reply
#23
edit: it is working so far. I had the battery jumper off. installing it/shorting it, it now boots


so i have to do this

Code:
  # zstd -d slackware-current-*-server-*-build-*.img   # dd if=slackware-current-*-server-*-build-*.img of=/dev/mmcblk0 bs=1M
if i try this

Code:
  sudo zstdcat slackware-current-*-server-*-build-*.img.zst > /dev/mmcblk0


i get "permission denied"
  Reply
#24
(12-01-2021, 12:57 PM)keaton Wrote: if i try this

Code:
  sudo zstdcat slackware-current-*-server-*-build-*.img.zst > /dev/mmcblk0


i get "permission denied"

Because in the latter example, you're only running the cat as root, not the shell redirect. Don't use sudo here, do sudo -i first to get a root shell.

Occasional Linux Kernel Contributor, Avid Wiki Updater, Ask Me About Quartz64
Open Hardware Quartz64 Model A TOSLink Adapter
Pi-bus GPIO Extender For ROCKPro64 And Quartz64 Model A
Plebian GNU/Linux
  Reply
#25
update kernel 5.16-rc4
slarm64-current-aarch64-server-quartz64-5.16.0-rc4-build-20211206.img.zst
slarm64-current-aarch64-server-quartz64-5.16.0-rc4-build-20211206.img.zst.sha256
slarm64-current-aarch64-xfce-quartz64-5.16.0-rc4-build-20211206.img.zst
slarm64-current-aarch64-xfce-quartz64-5.16.0-rc4-build-20211206.img.zst.sha256
donation   irradium

  Reply
#26
(12-06-2021, 05:50 AM)mara Wrote: slarm64-current-aarch64-xfce-quartz64-5.16.0-rc4-build-20211206.img.zst

It boots and runs but I have no HDMI output.

I don't know if there are any clues in here:-
Code:
root@quartz64:/var/log# cat Xorg.0.log [ 41.517] X.Org X Server 1.20.13 X Protocol Version 11, Revision 0 [ 41.517] Build Operating System: Slackware 15.0 Slackware Linux Project [ 41.517] Current Operating System: Linux quartz64 5.16.0-rc4 #1 SMP PREEMPT Sun Dec 5 23:15:25 UTC 2021 aarch64 [ 41.517] Kernel command line: root=/dev/mmcblk0p2 ro rootwait rootfstype=ext4 init=/sbin/init loglevel=4 earlycon=u8 [ 41.518] Build Date: 30 July 2021 08:16:48PM [ 41.518] [ 41.518] Current version of pixman: 0.40.0 [ 41.518] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 41.518] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 41.518] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Dec 6 10:14:45 2021 [ 41.524] (==) Using config directory: "/etc/X11/xorg.conf.d" [ 41.524] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 41.539] (==) No Layout section. Using the first Screen section. [ 41.539] (==) No screen section available. Using defaults. [ 41.539] (**) |-->Screen "Default Screen Section" (0) [ 41.539] (**) | |-->Monitor "<default monitor>" [ 41.540] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 41.541] (**) Option "BlankTime" "0" [ 41.541] (**) Option "StandbyTime" "0" [ 41.541] (**) Option "SuspendTime" "0" [ 41.541] (**) Option "OffTime" "0" [ 41.541] (==) Automatically adding devices [ 41.541] (==) Automatically enabling devices [ 41.541] (==) Automatically adding GPU devices [ 41.541] (==) Automatically binding GPU devices [ 41.541] (==) Max clients allowed: 256, resource mask: 0x1fffff [ 41.541] (WW) The directory "/usr/share/fonts/local" does not exist. [ 41.541] Entry deleted from font path. [ 41.542] (WW) The directory "/usr/share/fonts/CID" does not exist. [ 41.542] Entry deleted from font path. [ 41.551] (==) FontPath set to: /usr/share/fonts/misc, /usr/share/fonts/TTF, /usr/share/fonts/OTF, /usr/share/fonts/Type1, /usr/share/fonts/75dpi/:unscaled, /usr/share/fonts/100dpi/:unscaled, /usr/share/fonts/75dpi, /usr/share/fonts/100dpi, /usr/share/fonts/cyrillic [ 41.551] (==) ModulePath set to "/usr/lib64/xorg/modules" [ 41.551] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 41.551] (II) Loader magic: 0x624c30 [ 41.551] (II) Module ABI versions: [ 41.551] X.Org ANSI C Emulation: 0.4 [ 41.551] X.Org Video Driver: 24.1 [ 41.551] X.Org XInput driver : 24.1 [ 41.551] X.Org Server Extension : 10.0 [ 41.553] (II) xfree86: Adding drm device (/dev/dri/card0) [ 41.555] (II) no primary bus or device found [ 41.555] falling back to /sys/devices/platform/display-subsystem/drm/card0 [ 41.555] (II) LoadModule: "glx" [ 41.565] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so [ 41.579] (II) Module glx: vendor="X.Org Foundation" [ 41.579] compiled for 1.20.13, module version = 1.0.0 [ 41.579] ABI class: X.Org Server Extension, version 10.0 [ 41.579] (==) Matched modesetting as autoconfigured driver 0 [ 41.579] (==) Matched fbdev as autoconfigured driver 1 [ 41.579] (==) Assigned the driver to the xf86ConfigLayout [ 41.579] (II) LoadModule: "modesetting" [ 41.581] (II) Loading /usr/lib64/xorg/modules/drivers/modesetting_drv.so [ 41.584] (II) Module modesetting: vendor="X.Org Foundation" [ 41.584] compiled for 1.20.13, module version = 1.20.13 [ 41.584] Module class: X.Org Video Driver [ 41.585] ABI class: X.Org Video Driver, version 24.1 [ 41.585] (II) LoadModule: "fbdev" [ 41.585] (II) Loading /usr/lib64/xorg/modules/drivers/fbdev_drv.so [ 41.587] (II) Module fbdev: vendor="X.Org Foundation" [ 41.587] compiled for 1.20.9, module version = 0.5.0 [ 41.587] Module class: X.Org Video Driver [ 41.587] ABI class: X.Org Video Driver, version 24.1 [ 41.588] (II) modesetting: Driver for Modesetting Kernel Drivers: kms [ 41.588] (II) FBDEV: driver for framebuffer: fbdev [ 41.588] (++) using VT number 7 [ 41.593] (II) modeset(0): using drv /dev/dri/card0 [ 41.593] (WW) Falling back to old probe method for fbdev [ 41.593] (II) Loading sub module "fbdevhw" [ 41.593] (II) LoadModule: "fbdevhw" [ 41.595] (II) Loading /usr/lib64/xorg/modules/libfbdevhw.so [ 41.597] (II) Module fbdevhw: vendor="X.Org Foundation" [ 41.597] compiled for 1.20.13, module version = 0.0.2 [ 41.597] ABI class: X.Org Video Driver, version 24.1 [ 41.598] (EE) open /dev/fb0: No such file or directory [ 41.598] (II) modeset(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 [ 41.598] (==) modeset(0): Depth 24, (==) framebuffer bpp 32 [ 41.598] (==) modeset(0): RGB weight 888 [ 41.598] (==) modeset(0): Default visual is TrueColor [ 41.599] (II) Loading sub module "glamoregl" [ 41.599] (II) LoadModule: "glamoregl" [ 41.599] (II) Loading /usr/lib64/xorg/modules/libglamoregl.so [ 41.679] (II) Module glamoregl: vendor="X.Org Foundation" [ 41.679] compiled for 1.20.13, module version = 1.0.1 [ 41.679] ABI class: X.Org ANSI C Emulation, version 0.4 [ 44.159] (II) modeset(0): Refusing to try glamor on llvmpipe [ 44.166] (EE) modeset(0): glamor initialization failed [ 44.166] (II) modeset(0): ShadowFB: preferred NO, enabled NO [ 44.166] (II) modeset(0): Output HDMI-1 has no monitor section [ 44.167] (II) modeset(0): EDID for output HDMI-1 [ 44.167] (II) modeset(0): Output HDMI-1 disconnected [ 44.167] (WW) modeset(0): No outputs definitely connected, trying again... [ 44.167] (II) modeset(0): Output HDMI-1 disconnected [ 44.167] (WW) modeset(0): Unable to find connected outputs - setting 1024x768 initial framebuffer [ 44.167] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0) [ 44.167] (==) modeset(0): DPI set to (96, 96) [ 44.167] (II) Loading sub module "fb" [ 44.167] (II) LoadModule: "fb" [ 44.168] (II) Loading /usr/lib64/xorg/modules/libfb.so [ 44.174] (II) Module fb: vendor="X.Org Foundation" [ 44.174] compiled for 1.20.13, module version = 1.0.0 [ 44.174] ABI class: X.Org ANSI C Emulation, version 0.4 [ 44.174] (II) UnloadModule: "fbdev" [ 44.175] (II) Unloading fbdev [ 44.175] (II) UnloadSubModule: "fbdevhw" [ 44.175] (II) Unloading fbdevhw [ 44.188] (==) modeset(0): Backing store enabled [ 44.188] (==) modeset(0): Silken mouse enabled [ 44.191] (II) modeset(0): Initializing kms color map for depth 24, 8 bpc. [ 44.192] (==) modeset(0): DPMS enabled [ 44.192] (II) Initializing extension Generic Event Extension [ 44.192] (II) Initializing extension SHAPE [ 44.192] (II) Initializing extension MIT-SHM [ 44.192] (II) Initializing extension XInputExtension [ 44.194] (II) Initializing extension XTEST [ 44.194] (II) Initializing extension BIG-REQUESTS [ 44.194] (II) Initializing extension SYNC [ 44.194] (II) Initializing extension XKEYBOARD [ 44.194] (II) Initializing extension XC-MISC [ 44.194] (II) Initializing extension XFIXES [ 44.194] (II) Initializing extension RENDER [ 44.194] (II) Initializing extension RANDR [ 44.194] (II) Initializing extension COMPOSITE [ 44.194] (II) Initializing extension DAMAGE [ 44.195] (II) Initializing extension MIT-SCREEN-SAVER [ 44.195] (II) Initializing extension DOUBLE-BUFFER [ 44.195] (II) Initializing extension RECORD [ 44.195] (II) Initializing extension DPMS [ 44.195] (II) Initializing extension Present [ 44.195] (II) Initializing extension DRI3 [ 44.195] (II) Initializing extension X-Resource [ 44.195] (II) Initializing extension XVideo [ 44.195] (II) Initializing extension XVideo-MotionCompensation [ 44.195] (II) Initializing extension GLX [ 44.195] (II) AIGLX: Screen 0 is not DRI2 capable [ 44.353] (II) IGLX: Loaded and initialized swrast [ 44.353] (II) GLX: Initialized DRISWRAST GL provider for screen 0 [ 44.353] (II) Initializing extension XFree86-VidModeExtension [ 44.353] (II) Initializing extension XFree86-DGA [ 44.354] (II) Initializing extension XFree86-DRI [ 44.355] (II) Initializing extension DRI2 [ 44.356] (II) modeset(0): Damage tracking initialized [ 45.105] (II) config/udev: Adding input device Logitech K400 Plus (/dev/input/event1) [ 45.105] (**) Logitech K400 Plus: Applying InputClass "evdev pointer catchall" [ 45.105] (**) Logitech K400 Plus: Applying InputClass "evdev keyboard catchall" [ 45.105] (**) Logitech K400 Plus: Applying InputClass "libinput pointer catchall" [ 45.106] (**) Logitech K400 Plus: Applying InputClass "libinput keyboard catchall" [ 45.106] (**) Logitech K400 Plus: Applying InputClass "keyboard-all" [ 45.106] (**) Logitech K400 Plus: Applying InputClass "libinput keyboard catchall" [ 45.106] (II) LoadModule: "libinput" [ 45.107] (II) Loading /usr/lib64/xorg/modules/input/libinput_drv.so [ 45.130] (II) Module libinput: vendor="X.Org Foundation" [ 45.130] compiled for 1.20.13, module version = 1.2.0 [ 45.130] Module class: X.Org XInput Driver [ 45.130] ABI class: X.Org XInput driver, version 24.1 [ 45.130] (II) Using input driver 'libinput' for 'Logitech K400 Plus' [ 45.130] (**) Logitech K400 Plus: always reports core events [ 45.130] (**) Option "Device" "/dev/input/event1" [ 45.132] (**) Option "_source" "server/udev" [ 45.167] (II) event1 - Logitech K400 Plus: is tagged by udev as: Keyboard Mouse [ 45.168] (II) event1 - Logitech K400 Plus: device is a pointer [ 45.168] (II) event1 - Logitech K400 Plus: device is a keyboard [ 45.169] (II) event1 - Logitech K400 Plus: device removed [ 45.241] (II) libinput: Logitech K400 Plus: needs a virtual subdevice [ 45.241] (**) Option "config_info" "udev:/sys/devices/platform/fd840000.usb/usb3/3-1/3-1:1.2/0003:046D:C52B.0003/00" [ 45.241] (II) XINPUT: Adding extended input device "Logitech K400 Plus" (type: MOUSE, id 6) [ 45.242] (**) Option "AccelerationScheme" "none" [ 45.242] (**) Logitech K400 Plus: (accel) selected scheme none/0 [ 45.243] (**) Logitech K400 Plus: (accel) acceleration factor: 2.000 [ 45.243] (**) Logitech K400 Plus: (accel) acceleration threshold: 4 [ 45.247] (II) event1 - Logitech K400 Plus: is tagged by udev as: Keyboard Mouse [ 45.247] (II) event1 - Logitech K400 Plus: device is a pointer [ 45.247] (II) event1 - Logitech K400 Plus: device is a keyboard [ 45.250] (II) config/udev: Adding input device Logitech K400 Plus (/dev/input/mouse0) [ 45.250] (II) No input driver specified, ignoring this device. [ 45.250] (II) This device may have been added with another device file. [ 45.252] (II) config/udev: Adding input device Analog RK817 Headphones (/dev/input/event0) [ 45.252] (II) No input driver specified, ignoring this device. [ 45.253] (II) This device may have been added with another device file. [ 45.282] (**) Logitech K400 Plus: Applying InputClass "evdev pointer catchall" [ 45.282] (**) Logitech K400 Plus: Applying InputClass "evdev keyboard catchall" [ 45.283] (**) Logitech K400 Plus: Applying InputClass "libinput pointer catchall" [ 45.283] (**) Logitech K400 Plus: Applying InputClass "libinput keyboard catchall" [ 45.283] (**) Logitech K400 Plus: Applying InputClass "keyboard-all" [ 45.283] (**) Logitech K400 Plus: Applying InputClass "libinput keyboard catchall" [ 45.283] (II) Using input driver 'libinput' for 'Logitech K400 Plus' [ 45.283] (**) Logitech K400 Plus: always reports core events [ 45.283] (**) Option "Device" "/dev/input/event1" [ 45.283] (**) Option "_source" "_driver/libinput" [ 45.283] (II) libinput: Logitech K400 Plus: is a virtual subdevice [ 45.283] (**) Option "config_info" "udev:/sys/devices/platform/fd840000.usb/usb3/3-1/3-1:1.2/0003:046D:C52B.0003/00" [ 45.284] (II) XINPUT: Adding extended input device "Logitech K400 Plus" (type: KEYBOARD, id 7) [ 45.284] (**) Option "xkb_layout" "us" [ 45.284] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
  Reply
#27
I'm fine with the output to HDMI

Code:
[    46.222] X.Org X Server 1.20.13 X Protocol Version 11, Revision 0 [    46.222] Build Operating System: Slackware 15.0 Slackware Linux Project [    46.222] Current Operating System: Linux quartz64 5.16.0-rc4 #1 SMP PREEMPT Sun Dec 5 23:15:25 UTC 2021 aarch64 [    46.222] Kernel command line: root=/dev/mmcblk0p2 ro rootwait rootfstype=ext4 init=/sbin/init loglevel=4 earlycon=uart8250,mmio32,0xfe660000 console=tty1 console=ttyS2,1500000n8 [    46.222] Build Date: 30 July 2021  08:16:48PM [    46.222]  [    46.222] Current version of pixman: 0.40.0 [    46.222] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [    46.222] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [    46.223] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Aug  5 09:01:54 2017 [    46.227] (==) Using config directory: "/etc/X11/xorg.conf.d" [    46.227] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [    46.234] (==) No Layout section.  Using the first Screen section. [    46.234] (==) No screen section available. Using defaults. [    46.234] (**) |-->Screen "Default Screen Section" (0) [    46.234] (**) |   |-->Monitor "<default monitor>" [    46.235] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [    46.236] (**) Option "BlankTime" "0" [    46.236] (**) Option "StandbyTime" "0" [    46.236] (**) Option "SuspendTime" "0" [    46.236] (**) Option "OffTime" "0" [    46.236] (==) Automatically adding devices [    46.236] (==) Automatically enabling devices [    46.236] (==) Automatically adding GPU devices [    46.236] (==) Automatically binding GPU devices [    46.236] (==) Max clients allowed: 256, resource mask: 0x1fffff [    46.236] (WW) The directory "/usr/share/fonts/local" does not exist. [    46.236] Entry deleted from font path. [    46.237] (WW) The directory "/usr/share/fonts/CID" does not exist. [    46.237] Entry deleted from font path. [    46.247] (==) FontPath set to: /usr/share/fonts/misc, /usr/share/fonts/TTF, /usr/share/fonts/OTF, /usr/share/fonts/Type1, /usr/share/fonts/75dpi/:unscaled, /usr/share/fonts/100dpi/:unscaled, /usr/share/fonts/75dpi, /usr/share/fonts/100dpi, /usr/share/fonts/cyrillic [    46.247] (==) ModulePath set to "/usr/lib64/xorg/modules" [    46.247] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [    46.247] (II) Loader magic: 0x624c30 [    46.247] (II) Module ABI versions: [    46.247] X.Org ANSI C Emulation: 0.4 [    46.247] X.Org Video Driver: 24.1 [    46.248] X.Org XInput driver : 24.1 [    46.248] X.Org Server Extension : 10.0 [    46.249] (II) xfree86: Adding drm device (/dev/dri/card0) [    46.265] (II) no primary bus or device found [    46.265] falling back to /sys/devices/platform/display-subsystem/drm/card0 [    46.265] (II) LoadModule: "glx" [    46.270] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so [    46.281] (II) Module glx: vendor="X.Org Foundation" [    46.281] compiled for 1.20.13, module version = 1.0.0 [    46.281] ABI class: X.Org Server Extension, version 10.0 [    46.281] (==) Matched modesetting as autoconfigured driver 0 [    46.282] (==) Matched fbdev as autoconfigured driver 1 [    46.282] (==) Assigned the driver to the xf86ConfigLayout [    46.282] (II) LoadModule: "modesetting" [    46.283] (II) Loading /usr/lib64/xorg/modules/drivers/modesetting_drv.so [    46.288] (II) Module modesetting: vendor="X.Org Foundation" [    46.288] compiled for 1.20.13, module version = 1.20.13 [    46.288] Module class: X.Org Video Driver [    46.288] ABI class: X.Org Video Driver, version 24.1 [    46.288] (II) LoadModule: "fbdev" [    46.289] (II) Loading /usr/lib64/xorg/modules/drivers/fbdev_drv.so [    46.291] (II) Module fbdev: vendor="X.Org Foundation" [    46.291] compiled for 1.20.9, module version = 0.5.0 [    46.291] Module class: X.Org Video Driver [    46.291] ABI class: X.Org Video Driver, version 24.1 [    46.291] (II) modesetting: Driver for Modesetting Kernel Drivers: kms [    46.291] (II) FBDEV: driver for framebuffer: fbdev [    46.291] (++) using VT number 7 [    46.347] (II) modeset(0): using drv /dev/dri/card0 [    46.347] (WW) Falling back to old probe method for fbdev [    46.347] (II) Loading sub module "fbdevhw" [    46.347] (II) LoadModule: "fbdevhw" [    46.349] (II) Loading /usr/lib64/xorg/modules/libfbdevhw.so [    46.351] (II) Module fbdevhw: vendor="X.Org Foundation" [    46.352] compiled for 1.20.13, module version = 0.0.2 [    46.352] ABI class: X.Org Video Driver, version 24.1 [    46.352] (II) modeset(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 [    46.352] (==) modeset(0): Depth 24, (==) framebuffer bpp 32 [    46.353] (==) modeset(0): RGB weight 888 [    46.353] (==) modeset(0): Default visual is TrueColor [    46.353] (II) Loading sub module "glamoregl" [    46.353] (II) LoadModule: "glamoregl" [    46.354] (II) Loading /usr/lib64/xorg/modules/libglamoregl.so [    46.392] (II) Module glamoregl: vendor="X.Org Foundation" [    46.392] compiled for 1.20.13, module version = 1.0.1 [    46.392] ABI class: X.Org ANSI C Emulation, version 0.4 [    48.670] (II) modeset(0): Refusing to try glamor on llvmpipe [    48.677] (EE) modeset(0): glamor initialization failed [    48.677] (II) modeset(0): ShadowFB: preferred NO, enabled NO [    48.788] (II) modeset(0): Output HDMI-1 has no monitor section [    48.899] (II) modeset(0): EDID for output HDMI-1 [    48.899] (II) modeset(0): Manufacturer: SAM  Model: f57  Serial#: 810834008 [    48.899] (II) modeset(0): Year: 2019  Week: 26 [    48.899] (II) modeset(0): EDID Version: 1.3 [    48.899] (II) modeset(0): Digital Display Input [    48.899] (II) modeset(0): Max Image Size [cm]: horiz.: 60  vert.: 34 [    48.900] (II) modeset(0): Gamma: 2.20 [    48.900] (II) modeset(0): DPMS capabilities: Off [    48.900] (II) modeset(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 [    48.900] (II) modeset(0): First detailed timing is preferred mode [    48.900] (II) modeset(0): redX: 0.652 redY: 0.341   greenX: 0.320 greenY: 0.608 [    48.900] (II) modeset(0): blueX: 0.146 blueY: 0.065   whiteX: 0.313 whiteY: 0.329 [    48.900] (II) modeset(0): Supported established timings: [    48.900] (II) modeset(0): 720x400@70Hz [    48.900] (II) modeset(0): 640x480@60Hz [    48.900] (II) modeset(0): 640x480@67Hz [    48.900] (II) modeset(0): 640x480@72Hz [    48.900] (II) modeset(0): 640x480@75Hz [    48.900] (II) modeset(0): 800x600@56Hz [    48.900] (II) modeset(0): 800x600@60Hz [    48.900] (II) modeset(0): 800x600@72Hz [    48.900] (II) modeset(0): 800x600@75Hz [    48.900] (II) modeset(0): 832x624@75Hz [    48.900] (II) modeset(0): 1024x768@60Hz [    48.900] (II) modeset(0): 1024x768@70Hz [    48.900] (II) modeset(0): 1024x768@75Hz [    48.900] (II) modeset(0): 1280x1024@75Hz [    48.900] (II) modeset(0): 1152x864@75Hz [    48.901] (II) modeset(0): Manufacturer's mask: 0 [    48.901] (II) modeset(0): Supported standard timings: [    48.901] (II) modeset(0): #0: hsize: 1680  vsize 1050  refresh: 60  vid: 179 [    48.901] (II) modeset(0): #1: hsize: 1280  vsize 800  refresh: 60  vid: 129 [    48.901] (II) modeset(0): #2: hsize: 1280  vsize 720  refresh: 60  vid: 49281 [    48.901] (II) modeset(0): #3: hsize: 1280  vsize 1024  refresh: 60  vid: 32897 [    48.901] (II) modeset(0): #4: hsize: 1440  vsize 900  refresh: 60  vid: 149 [    48.901] (II) modeset(0): #5: hsize: 1600  vsize 900  refresh: 60  vid: 49321 [    48.901] (II) modeset(0): #6: hsize: 1152  vsize 864  refresh: 75  vid: 20337 [    48.901] (II) modeset(0): Supported detailed timing: [    48.901] (II) modeset(0): clock: 241.5 MHz   Image Size:  597 x 336 mm [    48.901] (II) modeset(0): h_active: 2560  h_sync: 2608  h_sync_end 2640 h_blank_end 2720 h_border: 0 [    48.901] (II) modeset(0): v_active: 1440  v_sync: 1443  v_sync_end 1448 v_blanking: 1481 v_border: 0 [    48.901] (II) modeset(0): Ranges: V min: 50 V max: 75 Hz, H min: 27 H max: 89 kHz, PixClock max 255 MHz [    48.901] (II) modeset(0): Monitor name: C27JG5x [    48.901] (II) modeset(0): Serial No: HTOM601358 [    48.901] (II) modeset(0): Supported detailed timing: [    48.901] (II) modeset(0): clock: 148.5 MHz   Image Size:  597 x 336 mm [    48.901] (II) modeset(0): h_active: 1920  h_sync: 2008  h_sync_end 2052 h_blank_end 2200 h_border: 0 [    48.901] (II) modeset(0): v_active: 1080  v_sync: 1084  v_sync_end 1089 v_blanking: 1125 v_border: 0 [    48.902] (II) modeset(0): Supported detailed timing: [    48.902] (II) modeset(0): clock: 148.5 MHz   Image Size:  597 x 336 mm [    48.902] (II) modeset(0): h_active: 1920  h_sync: 2448  h_sync_end 2492 h_blank_end 2640 h_border: 0 [    48.902] (II) modeset(0): v_active: 1080  v_sync: 1084  v_sync_end 1089 v_blanking: 1125 v_border: 0 [    48.902] (II) modeset(0): Supported detailed timing: [    48.902] (II) modeset(0): clock: 74.2 MHz   Image Size:  597 x 336 mm [    48.902] (II) modeset(0): h_active: 1280  h_sync: 1390  h_sync_end 1430 h_blank_end 1650 h_border: 0 [    48.902] (II) modeset(0): v_active: 720  v_sync: 725  v_sync_end 730 v_blanking: 750 v_border: 0 [    48.902] (II) modeset(0): Supported detailed timing: [    48.902] (II) modeset(0): clock: 74.2 MHz   Image Size:  597 x 336 mm [    48.902] (II) modeset(0): h_active: 1280  h_sync: 1720  h_sync_end 1760 h_blank_end 1980 h_border: 0 [    48.902] (II) modeset(0): v_active: 720  v_sync: 725  v_sync_end 730 v_blanking: 750 v_border: 0 [    48.902] (II) modeset(0): Supported detailed timing: [    48.902] (II) modeset(0): clock: 27.0 MHz   Image Size:  597 x 336 mm [    48.902] (II) modeset(0): h_active: 720  h_sync: 736  h_sync_end 798 h_blank_end 858 h_border: 0 [    48.902] (II) modeset(0): v_active: 480  v_sync: 489  v_sync_end 495 v_blanking: 525 v_border: 0 [    48.902] (II) modeset(0): Number of EDID sections to follow: 1 [    48.902] (II) modeset(0): EDID (in hex): [    48.902] (II) modeset(0): 00ffffffffffff004c2d570f58585430 [    48.902] (II) modeset(0): 1a1d0103803c22782a1375a757529b25 [    48.903] (II) modeset(0): 105054bfef80b300810081c081809500 [    48.903] (II) modeset(0): a9c0714f0101565e00a0a0a029503020 [    48.903] (II) modeset(0): 350055502100001a000000fd00324b1b [    48.903] (II) modeset(0): 5919000a202020202020000000fc0043 [    48.903] (II) modeset(0): 32374a4735780a2020202020000000ff [    48.903] (II) modeset(0): 0048544f4d3630313335380a202001fc [    48.903] (II) modeset(0): 02031bf146901f041303122309070783 [    48.903] (II) modeset(0): 01000067030c0020008032023a801871 [    48.903] (II) modeset(0): 382d40582c450055502100001e023a80 [    48.903] (II) modeset(0): d072382d40102c458055502100001e01 [    48.903] (II) modeset(0): 1d007251d01e206e2855005550210000 [    48.903] (II) modeset(0): 1e011d00bc52d01e20b8285540555021 [    48.903] (II) modeset(0): 00001e8c0ad08a20e02d10103e960055 [    48.903] (II) modeset(0): 50210000180000000000000000000069 [    48.903] (--) modeset(0): HDMI max TMDS frequency 250000KHz [    48.904] (II) modeset(0): Printing probed modes for output HDMI-1 [    48.904] (II) modeset(0): Modeline "1920x1080"x60.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz e) [    48.904] (II) modeset(0): Modeline "1920x1080"x50.0  148.50  1920 2448 2492 2640  1080 1084 1089 1125 +hsync +vsync (56.2 kHz e) [    48.904] (II) modeset(0): Modeline "1600x900"x60.0  108.00  1600 1624 1704 1800  900 901 904 1000 +hsync +vsync (60.0 kHz e) [    48.904] (II) modeset(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e) [    48.904] (II) modeset(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e) [    48.904] (II) modeset(0): Modeline "1280x720"x60.0   74.25  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz e) [    48.904] (II) modeset(0): Modeline "1280x720"x50.0   74.25  1280 1720 1760 1980  720 725 730 750 +hsync +vsync (37.5 kHz e) [    48.904] (II) modeset(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e) [    48.904] (II) modeset(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e) [    48.904] (II) modeset(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e) [    48.904] (II) modeset(0): Modeline "720x576"x50.0   27.00  720 732 796 864  576 581 586 625 -hsync -vsync (31.2 kHz e) [    48.904] (II) modeset(0): Modeline "720x480"x59.9   27.00  720 736 798 858  480 489 495 525 -hsync -vsync (31.5 kHz e) [    48.904] (II) modeset(0): Output HDMI-1 connected [    48.904] (II) modeset(0): Using exact sizes for initial modes [    48.904] (II) modeset(0): Output HDMI-1 using initial mode 1920x1080 +0+0 [    48.905] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0) [    48.905] (==) modeset(0): DPI set to (96, 96) [    48.905] (II) Loading sub module "fb" [    48.905] (II) LoadModule: "fb" [    48.906] (II) Loading /usr/lib64/xorg/modules/libfb.so [    48.915] (II) Module fb: vendor="X.Org Foundation" [    48.915] compiled for 1.20.13, module version = 1.0.0 [    48.915] ABI class: X.Org ANSI C Emulation, version 0.4 [    48.915] (II) UnloadModule: "fbdev" [    48.915] (II) Unloading fbdev [    48.915] (II) UnloadSubModule: "fbdevhw" [    48.915] (II) Unloading fbdevhw [    48.938] (==) modeset(0): Backing store enabled [    48.938] (==) modeset(0): Silken mouse enabled [    48.947] (II) modeset(0): Initializing kms color map for depth 24, 8 bpc. [    48.947] (==) modeset(0): DPMS enabled [    48.948] (II) Initializing extension Generic Event Extension [    48.948] (II) Initializing extension SHAPE [    48.948] (II) Initializing extension MIT-SHM [    48.948] (II) Initializing extension XInputExtension [    48.950] (II) Initializing extension XTEST [    48.950] (II) Initializing extension BIG-REQUESTS [    48.950] (II) Initializing extension SYNC [    48.950] (II) Initializing extension XKEYBOARD [    48.950] (II) Initializing extension XC-MISC [    48.950] (II) Initializing extension XFIXES [    48.950] (II) Initializing extension RENDER [    48.950] (II) Initializing extension RANDR [    48.950] (II) Initializing extension COMPOSITE [    48.950] (II) Initializing extension DAMAGE [    48.951] (II) Initializing extension MIT-SCREEN-SAVER [    48.951] (II) Initializing extension DOUBLE-BUFFER [    48.951] (II) Initializing extension RECORD [    48.951] (II) Initializing extension DPMS [    48.951] (II) Initializing extension Present [    48.951] (II) Initializing extension DRI3 [    48.951] (II) Initializing extension X-Resource [    48.951] (II) Initializing extension XVideo [    48.951] (II) Initializing extension XVideo-MotionCompensation [    48.951] (II) Initializing extension GLX [    48.951] (II) AIGLX: Screen 0 is not DRI2 capable [    49.132] (II) IGLX: Loaded and initialized swrast [    49.132] (II) GLX: Initialized DRISWRAST GL provider for screen 0 [    49.132] (II) Initializing extension XFree86-VidModeExtension [    49.132] (II) Initializing extension XFree86-DGA [    49.132] (II) Initializing extension XFree86-DRI [    49.133] (II) Initializing extension DRI2 [    49.136] (II) modeset(0): Damage tracking initialized [    49.136] (II) modeset(0): Setting screen physical size to 508 x 285 [    49.905] (II) config/udev: Adding input device Analog RK817 Headphones (/dev/input/event0) [    49.905] (II) No input driver specified, ignoring this device. [    49.905] (II) This device may have been added with another device file. [    64.810] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/mouse0) [    64.810] (II) No input driver specified, ignoring this device. [    64.810] (II) This device may have been added with another device file. [    64.937] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/event1) [    64.937] (**) Logitech USB Optical Mouse: Applying InputClass "evdev pointer catchall" [    64.937] (**) Logitech USB Optical Mouse: Applying InputClass "libinput pointer catchall" [    64.937] (II) LoadModule: "libinput" [    64.938] (II) Loading /usr/lib64/xorg/modules/input/libinput_drv.so [    64.966] (II) Module libinput: vendor="X.Org Foundation" [    64.966] compiled for 1.20.13, module version = 1.2.0 [    64.966] Module class: X.Org XInput Driver [    64.966] ABI class: X.Org XInput driver, version 24.1 [    64.966] (II) Using input driver 'libinput' for 'Logitech USB Optical Mouse' [    64.966] (**) Logitech USB Optical Mouse: always reports core events [    64.966] (**) Option "Device" "/dev/input/event1" [    64.968] (**) Option "_source" "server/udev" [    65.008] (II) event1  - Logitech USB Optical Mouse: is tagged by udev as: Mouse [    65.009] (II) event1  - Logitech USB Optical Mouse: device is a pointer [    65.010] (II) event1  - Logitech USB Optical Mouse: device removed [    65.121] (**) Option "config_info" "udev:/sys/devices/platform/fd800000.usb/usb1/1-1/1-1.1/1-1.1:1.0/0003:046D:C077.0001/input/input1/event1" [    65.121] (II) XINPUT: Adding extended input device "Logitech USB Optical Mouse" (type: MOUSE, id 6) [    65.122] (**) Option "AccelerationScheme" "none" [    65.122] (**) Logitech USB Optical Mouse: (accel) selected scheme none/0 [    65.123] (**) Logitech USB Optical Mouse: (accel) acceleration factor: 2.000 [    65.123] (**) Logitech USB Optical Mouse: (accel) acceleration threshold: 4 [    65.127] (II) event1  - Logitech USB Optical Mouse: is tagged by udev as: Mouse [    65.127] (II) event1  - Logitech USB Optical Mouse: device is a pointer [    65.132] (II) event1  - Logitech USB Optical Mouse: SYN_DROPPED event - some input events have been lost. [    65.349] (II) config/udev: Adding input device Logitech USB Keyboard System Control (/dev/input/event4) [    65.349] (**) Logitech USB Keyboard System Control: Applying InputClass "evdev keyboard catchall" [    65.349] (**) Logitech USB Keyboard System Control: Applying InputClass "libinput keyboard catchall" [    65.349] (**) Logitech USB Keyboard System Control: Applying InputClass "keyboard-all" [    65.349] (**) Logitech USB Keyboard System Control: Applying InputClass "libinput keyboard catchall" [    65.349] (II) Using input driver 'libinput' for 'Logitech USB Keyboard System Control' [    65.349] (**) Logitech USB Keyboard System Control: always reports core events [    65.349] (**) Option "Device" "/dev/input/event4" [    65.349] (**) Option "_source" "server/udev" [    65.354] (II) event4  - Logitech USB Keyboard System Control: is tagged by udev as: Keyboard [    65.354] (II) event4  - Logitech USB Keyboard System Control: device is a keyboard [    65.355] (II) event4  - Logitech USB Keyboard System Control: device removed [    65.410] (**) Option "config_info" "udev:/sys/devices/platform/fd800000.usb/usb1/1-1/1-1.4/1-1.4:1.1/0003:046D:C31C.0003/input/input4/event4" [    65.410] (II) XINPUT: Adding extended input device "Logitech USB Keyboard System Control" (type: KEYBOARD, id 7) [    65.410] (**) Option "xkb_layout" "us" [    65.410] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [    65.554] (II) event4  - Logitech USB Keyboard System Control: is tagged by udev as: Keyboard [    65.555] (II) event4  - Logitech USB Keyboard System Control: device is a keyboard [    65.565] (II) config/udev: Adding input device Logitech USB Keyboard (/dev/input/event2) [    65.565] (**) Logitech USB Keyboard: Applying InputClass "evdev keyboard catchall" [    65.566] (**) Logitech USB Keyboard: Applying InputClass "libinput keyboard catchall" [    65.566] (**) Logitech USB Keyboard: Applying InputClass "keyboard-all" [    65.566] (**) Logitech USB Keyboard: Applying InputClass "libinput keyboard catchall" [    65.566] (II) Using input driver 'libinput' for 'Logitech USB Keyboard' [    65.566] (**) Logitech USB Keyboard: always reports core events [    65.566] (**) Option "Device" "/dev/input/event2" [    65.566] (**) Option "_source" "server/udev" [    65.570] (II) event2  - Logitech USB Keyboard: is tagged by udev as: Keyboard [    65.570] (II) event2  - Logitech USB Keyboard: device is a keyboard [    65.571] (II) event2  - Logitech USB Keyboard: device removed [    65.620] (**) Option "config_info" "udev:/sys/devices/platform/fd800000.usb/usb1/1-1/1-1.4/1-1.4:1.0/0003:046D:C31C.0002/input/input2/event2" [    65.620] (II) XINPUT: Adding extended input device "Logitech USB Keyboard" (type: KEYBOARD, id 8) [    65.620] (**) Option "xkb_layout" "us" [    65.620] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [    65.625] (II) event2  - Logitech USB Keyboard: is tagged by udev as: Keyboard [    65.625] (II) event2  - Logitech USB Keyboard: device is a keyboard [    65.632] (II) config/udev: Adding input device Logitech USB Keyboard Consumer Control (/dev/input/event3) [    65.632] (**) Logitech USB Keyboard Consumer Control: Applying InputClass "evdev keyboard catchall" [    65.632] (**) Logitech USB Keyboard Consumer Control: Applying InputClass "libinput keyboard catchall" [    65.632] (**) Logitech USB Keyboard Consumer Control: Applying InputClass "keyboard-all" [    65.632] (**) Logitech USB Keyboard Consumer Control: Applying InputClass "libinput keyboard catchall" [    65.632] (II) Using input driver 'libinput' for 'Logitech USB Keyboard Consumer Control' [    65.632] (**) Logitech USB Keyboard Consumer Control: always reports core events [    65.632] (**) Option "Device" "/dev/input/event3" [    65.633] (**) Option "_source" "server/udev" [    65.637] (II) event3  - Logitech USB Keyboard Consumer Control: is tagged by udev as: Keyboard [    65.637] (II) event3  - Logitech USB Keyboard Consumer Control: device is a keyboard [    65.637] (II) event3  - Logitech USB Keyboard Consumer Control: device removed [    65.720] (**) Option "config_info" "udev:/sys/devices/platform/fd800000.usb/usb1/1-1/1-1.4/1-1.4:1.1/0003:046D:C31C.0003/input/input3/event3" [    65.720] (II) XINPUT: Adding extended input device "Logitech USB Keyboard Consumer Control" (type: KEYBOARD, id 9) [    65.720] (**) Option "xkb_layout" "us" [    65.720] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [    65.725] (II) event3  - Logitech USB Keyboard Consumer Control: is tagged by udev as: Keyboard [    65.725] (II) event3  - Logitech USB Keyboard Consumer Control: device is a keyboard [    80.917] (II) modeset(0): EDID vendor "SAM", prod id 3927 [    80.918] (II) modeset(0): Using EDID range info for horizontal sync [    80.918] (II) modeset(0): Using EDID range info for vertical refresh [    80.918] (II) modeset(0): Printing DDC gathered Modelines: [    80.918] (II) modeset(0): Modeline "2560x1440"x0.0  241.50  2560 2608 2640 2720  1440 1443 1448 1481 +hsync -vsync (88.8 kHz eP) [    80.918] (II) modeset(0): Modeline "1920x1080"x0.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz e) [    80.918] (II) modeset(0): Modeline "1920x1080"x0.0  148.50  1920 2448 2492 2640  1080 1084 1089 1125 +hsync +vsync (56.2 kHz e) [    80.918] (II) modeset(0): Modeline "1280x720"x0.0   74.25  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz e) [    80.918] (II) modeset(0): Modeline "1280x720"x0.0   74.25  1280 1720 1760 1980  720 725 730 750 +hsync +vsync (37.5 kHz e) [    80.918] (II) modeset(0): Modeline "720x480"x0.0   27.00  720 736 798 858  480 489 495 525 -hsync -vsync (31.5 kHz e) [    80.918] (II) modeset(0): Modeline "720x576"x0.0   27.00  720 732 796 864  576 581 586 625 -hsync -vsync (31.2 kHz e) [    80.918] (II) modeset(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e) [    80.918] (II) modeset(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e) [    80.918] (II) modeset(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e) [    80.919] (II) modeset(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e) [    80.919] (II) modeset(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e) [    80.919] (II) modeset(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e) [    80.919] (II) modeset(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e) [    80.919] (II) modeset(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e) [    80.919] (II) modeset(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e) [    80.919] (II) modeset(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e) [    80.919] (II) modeset(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e) [    80.919] (II) modeset(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e) [    80.919] (II) modeset(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e) [    80.919] (II) modeset(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e) [    80.919] (II) modeset(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e) [    80.919] (II) modeset(0): Modeline "1680x1050"x0.0  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz e) [    80.919] (II) modeset(0): Modeline "1280x800"x0.0   71.00  1280 1328 1360 1440  800 803 809 823 +hsync -vsync (49.3 kHz e) [    80.919] (II) modeset(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e) [    80.919] (II) modeset(0): Modeline "1440x900"x0.0   88.75  1440 1488 1520 1600  900 903 909 926 +hsync -vsync (55.5 kHz e) [    80.920] (II) modeset(0): Modeline "1600x900"x60.0  119.00  1600 1696 1864 2128  900 901 904 932 -hsync +vsync (55.9 kHz e) [    80.921] (--) modeset(0): HDMI max TMDS frequency 250000KHz

your monitor is not detected
Code:
[    44.167] (II) modeset(0): Output HDMI-1 disconnected [    44.167] (WW) modeset(0): No outputs definitely connected, trying again... [    44.167] (II) modeset(0): Output HDMI-1 disconnected
donation   irradium

  Reply
#28
that particular monitor worked with your 4.19 build
  Reply
#29
(12-06-2021, 08:12 AM)dieselnutjob Wrote: that particular monitor worked with your 4.19 build

try to reconnect physically HDMI after booting
donation   irradium

  Reply
#30
The mainline vop2 patchset only works at 1080p right now as far as I can tell, so your monitor needs to be able to handle a 1080p mode.

Occasional Linux Kernel Contributor, Avid Wiki Updater, Ask Me About Quartz64
Open Hardware Quartz64 Model A TOSLink Adapter
Pi-bus GPIO Extender For ROCKPro64 And Quartz64 Model A
Plebian GNU/Linux
  Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  USB on Quartz64 Zero litbulb 1 2,831 07-22-2026, 02:04 PM
Last Post: MichaIng
  DietPi OS for Quartz64 MichaIng 48 63,428 07-22-2026, 01:52 PM
Last Post: MichaIng
  irradium (based on crux linux) Quartz64 riscv64, aarch64 mara 8 18,944 03-07-2026, 04:21 PM
Last Post: mara
  How does CPU frequency scaling work on the Quartz64 pugzarecute 0 2,638 07-30-2025, 07:19 AM
Last Post: pugzarecute
  Armbian and LibreELEC and AltLinux for Quartz64 balbes150 152 191,406 03-23-2025, 01:10 AM
Last Post: balbes150
  quartz64-a - on-board SATA port problems manning 2 6,025 09-14-2023, 04:22 PM
Last Post: manning
  How the reset Quartz64-b onboard memory (emmc) beepy 2 4,862 07-20-2023, 10:44 PM
Last Post: beepy
  crux-arm Quartz64 RK3566 (aarch64) mara 5 11,553 10-29-2022, 06:55 AM
Last Post: mara
  Ov5647 camera attached via csi to Quartz64 /Soquartz Randomuser 0 4,304 07-21-2022, 01:08 PM
Last Post: Randomuser
  Armbian on Quartz64 dieselnutjob 34 59,693 03-17-2022, 06:29 AM
Last Post: balbes150

Forum Jump:


Users browsing this thread: 1 Guest(s)