quartz64-a - on-board SATA port problems
#1
Hi all,



I've been having problems getting the on-board SATA port on the Quartz64 Model A working, and I'm hoping someone might be able to point me in the right direction.  Thanks in advance for any help.



Hardware
  • Quartz64 model A
  • Current generation HDD
  • SATA cable
  • 5A power supply
  • Pine64 board to 2x SATA power splitter cable


Software


Validating the manual edits:

Code:
$ ls /boot/dtbs/rockchip/ | grep quartz64
rk3566-quartz64-a.dtb
rk3566-quartz64-a-sata.dtb
rk3566-quartz64-b.dtb
Code:
$ fdtget /boot/dtbs/rockchip/rk3566-quartz64-a-sata.dtb /usb@fd000000 status
disabled
Code:
$ fdtget /boot/dtbs/rockchip/rk3566-quartz64-a-sata.dtb /sata@fc400000 status
okay
Code:
$ cat /boot/extlinux/extlinux.conf
LABEL Manjaro ARM
KERNEL /Image
FDT /dtbs/rockchip/rk3566-quartz64-a-sata.dtb
APPEND initrd=/initramfs-linux.img console=ttyS2,1500000 earlycon=uart8250,mmio32,0xfe660000 root=PARTUUID=<REDACTED> rw rootwait audit=0 splash plymouth.ignore-serial-consoles



Tests performed
  • Tested SATA cable in another system, confirmed good; tested with other known-good SATA cables
  • Tested a 2 port SATA to PCIe adaptor card (the Pine64 one), which works perfectly on this board
  • Tested multiple known-good HDDs one at a time; all work via the PCIe card, none appear on the on-board SATA port
  • Tested running 3 drives simultaneously; those plugged into the PCIe adapter work, but not on the on-board SATA port.  Have cycled which drive was plugged into which SATA port, for the same result


These test results imply to me it's most likely a problem with the software setup, with a small chance the hardware is problematic.



Various debug outputs



dmesg:

Code:
$ dmesg | grep ATA

<blank>

Code:
$ dmesg | grep usb
Code:
[    0.149542] usbcore: registered new interface driver usbfs
Code:
[    0.149609] usbcore: registered new interface driver hub
Code:
[    0.149660] usbcore: registered new device driver usb
Code:
[    0.344238] usbcore: registered new interface driver uas
Code:
[    0.344374] usbcore: registered new interface driver usb-storage
Code:
[    0.344521] usbcore: registered new interface driver usbserial_generic
Code:
[    0.344583] usbserial: USB Serial support registered for generic
Code:
[    0.345027] ehci-platform fd800000.usb: EHCI Host Controller
Code:
[    0.345053] ohci-platform fd840000.usb: Generic Platform OHCI controller
Code:
[    0.345117] ehci-platform fd880000.usb: EHCI Host Controller
Code:
[    0.345456] ehci-platform fd880000.usb: new USB bus registered, assigned bus number 2
Code:
[    0.345498] ehci-platform fd800000.usb: new USB bus registered, assigned bus number 1
Code:
[    0.345662] ehci-platform fd880000.usb: irq 36, io mem 0xfd880000
Code:
[    0.345722] ehci-platform fd800000.usb: irq 35, io mem 0xfd800000
Code:
[    0.345783] ohci-platform fd8c0000.usb: Generic Platform OHCI controller
Code:
[    0.345828] ohci-platform fd840000.usb: new USB bus registered, assigned bus number 3
Code:
[    0.346057] ohci-platform fd840000.usb: irq 37, io mem 0xfd840000
Code:
[    0.346073] ohci-platform fd8c0000.usb: new USB bus registered, assigned bus number 4
Code:
[    0.346193] ohci-platform fd8c0000.usb: irq 38, io mem 0xfd8c0000
Code:
[    0.374372] ehci-platform fd880000.usb: USB 2.0 started, EHCI 1.00
Code:
[    0.374890] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01
Code:
[    0.374912] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Code:
[    0.374924] usb usb2: Product: EHCI Host Controller
Code:
[    0.374934] usb usb2: Manufacturer: Linux 6.1.12-1-MANJARO-ARM ehci_hcd
Code:
[    0.374942] usb usb2: SerialNumber: fd880000.usb
Code:
[    0.404373] ehci-platform fd800000.usb: USB 2.0 started, EHCI 1.00
Code:
[    0.404975] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01
Code:
[    0.404997] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Code:
[    0.405008] usb usb1: Product: EHCI Host Controller
Code:
[    0.405017] usb usb1: Manufacturer: Linux 6.1.12-1-MANJARO-ARM ehci_hcd
Code:
[    0.405026] usb usb1: SerialNumber: fd800000.usb
Code:
[    0.418667] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.01
Code:
[    0.418701] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Code:
[    0.418714] usb usb4: Product: Generic Platform OHCI controller
Code:
[    0.418723] usb usb4: Manufacturer: Linux 6.1.12-1-MANJARO-ARM ohci_hcd
Code:
[    0.418732] usb usb4: SerialNumber: fd8c0000.usb
Code:
[    0.420667] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.01
Code:
[    0.420691] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Code:
[    0.420703] usb usb3: Product: Generic Platform OHCI controller
Code:
[    0.420713] usb usb3: Manufacturer: Linux 6.1.12-1-MANJARO-ARM ohci_hcd
Code:
[    0.420723] usb usb3: SerialNumber: fd840000.usb
Code:
[    0.502514] usbcore: registered new interface driver pcwd_usb
Code:
[    0.518025] usbcore: registered new interface driver usbhid
Code:
[    0.518032] usbhid: USB HID core driver
Code:
[    0.685734] reg-fixed-voltage vcc5v0_usb20_otg: nonexclusive access to GPIO for vcc5v0_usb20_otg
Code:
[    1.855035] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01
Code:
[    1.855074] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Code:
[    1.855098] usb usb5: Product: xHCI Host Controller
Code:
[    1.855117] usb usb5: Manufacturer: Linux 6.1.12-1-MANJARO-ARM xhci-hcd
Code:
[    1.855134] usb usb5: SerialNumber: xhci-hcd.0.auto





Looking for block devices doesn't show any SATA hard drives:
Code:
$ lsblk
NAME         MAJ:MIN RM   SIZE RO TYPE MOUNTPOINTS
mmcblk1      179:0    0  14.6G  0 disk
├─mmcblk1p1  179:1    0 457.8M  0 part /boot
└─mmcblk1p2  179:2    0  14.1G  0 part /
mmcblk1boot0 179:32   0     4M  1 disk
mmcblk1boot1 179:64   0     4M  1 disk
zram0        253:0    0   5.5G  0 disk [SWAP]


Code:
$ lsscsi

<blank>


Code:
$ sudo fdisk -l
Disk /dev/mmcblk1: 14.59 GiB, 15665725440 bytes, 30597120 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: gpt
Disk identifier: 9D5D28C6-63B7-4C32-BA44-DAAF62A38685

Device           Start      End  Sectors   Size Type
/dev/mmcblk1p1   62500  1000000   937501 457.8M Microsoft basic data
/dev/mmcblk1p2 1000001 30597086 29597086  14.1G Linux filesystem


Disk /dev/mmcblk1boot0: 4 MiB, 4194304 bytes, 8192 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/mmcblk1boot1: 4 MiB, 4194304 bytes, 8192 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/zram0: 5.48 GiB, 5886869504 bytes, 1437224 sectors
Units: sectors of 1 * 4096 = 4096 bytes
Sector size (logical/physical): 4096 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
  Reply
#2
(03-01-2023, 05:20 AM)manning Wrote: Hi all,



I've been having problems getting the on-board SATA port on the Quartz64 Model A working, and I'm hoping someone might be able to point me in the right direction.  Thanks in advance for any help.



Hardware
  • Quartz64 model A
  • Current generation HDD
  • SATA cable
  • 5A power supply
  • Pine64 board to 2x SATA power splitter cable


Software


Validating the manual edits:

Code:
$ ls /boot/dtbs/rockchip/ | grep quartz64
rk3566-quartz64-a.dtb
rk3566-quartz64-a-sata.dtb
rk3566-quartz64-b.dtb
Code:
$ fdtget /boot/dtbs/rockchip/rk3566-quartz64-a-sata.dtb /usb@fd000000 status
disabled
Code:
$ fdtget /boot/dtbs/rockchip/rk3566-quartz64-a-sata.dtb /sata@fc400000 status
okay
Code:
$ cat /boot/extlinux/extlinux.conf
LABEL Manjaro ARM
KERNEL /Image
FDT /dtbs/rockchip/rk3566-quartz64-a-sata.dtb
APPEND initrd=/initramfs-linux.img console=ttyS2,1500000 earlycon=uart8250,mmio32,0xfe660000 root=PARTUUID=<REDACTED> rw rootwait audit=0 splash plymouth.ignore-serial-consoles



Tests performed
  • Tested SATA cable in another system, confirmed good; tested with other known-good SATA cables
  • Tested a 2 port SATA to PCIe adaptor card (the Pine64 one), which works perfectly on this board
  • Tested multiple known-good HDDs one at a time; all work via the PCIe card, none appear on the on-board SATA port
  • Tested running 3 drives simultaneously; those plugged into the PCIe adapter work, but not on the on-board SATA port.  Have cycled which drive was plugged into which SATA port, for the same result


These test results imply to me it's most likely a problem with the software setup, with a small chance the hardware is problematic.



Various debug outputs



dmesg:

Code:
$ dmesg | grep ATA

<blank>

Code:
$ dmesg | grep usb
Code:
[    0.149542] usbcore: registered new interface driver usbfs
Code:
[    0.149609] usbcore: registered new interface driver hub
Code:
[    0.149660] usbcore: registered new device driver usb
Code:
[    0.344238] usbcore: registered new interface driver uas
Code:
[    0.344374] usbcore: registered new interface driver usb-storage
Code:
[    0.344521] usbcore: registered new interface driver usbserial_generic
Code:
[    0.344583] usbserial: USB Serial support registered for generic
Code:
[    0.345027] ehci-platform fd800000.usb: EHCI Host Controller
Code:
[    0.345053] ohci-platform fd840000.usb: Generic Platform OHCI controller
Code:
[    0.345117] ehci-platform fd880000.usb: EHCI Host Controller
Code:
[    0.345456] ehci-platform fd880000.usb: new USB bus registered, assigned bus number 2
Code:
[    0.345498] ehci-platform fd800000.usb: new USB bus registered, assigned bus number 1
Code:
[    0.345662] ehci-platform fd880000.usb: irq 36, io mem 0xfd880000
Code:
[    0.345722] ehci-platform fd800000.usb: irq 35, io mem 0xfd800000
Code:
[    0.345783] ohci-platform fd8c0000.usb: Generic Platform OHCI controller
Code:
[    0.345828] ohci-platform fd840000.usb: new USB bus registered, assigned bus number 3
Code:
[    0.346057] ohci-platform fd840000.usb: irq 37, io mem 0xfd840000
Code:
[    0.346073] ohci-platform fd8c0000.usb: new USB bus registered, assigned bus number 4
Code:
[    0.346193] ohci-platform fd8c0000.usb: irq 38, io mem 0xfd8c0000
Code:
[    0.374372] ehci-platform fd880000.usb: USB 2.0 started, EHCI 1.00
Code:
[    0.374890] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01
Code:
[    0.374912] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Code:
[    0.374924] usb usb2: Product: EHCI Host Controller
Code:
[    0.374934] usb usb2: Manufacturer: Linux 6.1.12-1-MANJARO-ARM ehci_hcd
Code:
[    0.374942] usb usb2: SerialNumber: fd880000.usb
Code:
[    0.404373] ehci-platform fd800000.usb: USB 2.0 started, EHCI 1.00
Code:
[    0.404975] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01
Code:
[    0.404997] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Code:
[    0.405008] usb usb1: Product: EHCI Host Controller
Code:
[    0.405017] usb usb1: Manufacturer: Linux 6.1.12-1-MANJARO-ARM ehci_hcd
Code:
[    0.405026] usb usb1: SerialNumber: fd800000.usb
Code:
[    0.418667] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.01
Code:
[    0.418701] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Code:
[    0.418714] usb usb4: Product: Generic Platform OHCI controller
Code:
[    0.418723] usb usb4: Manufacturer: Linux 6.1.12-1-MANJARO-ARM ohci_hcd
Code:
[    0.418732] usb usb4: SerialNumber: fd8c0000.usb
Code:
[    0.420667] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.01
Code:
[    0.420691] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Code:
[    0.420703] usb usb3: Product: Generic Platform OHCI controller
Code:
[    0.420713] usb usb3: Manufacturer: Linux 6.1.12-1-MANJARO-ARM ohci_hcd
Code:
[    0.420723] usb usb3: SerialNumber: fd840000.usb
Code:
[    0.502514] usbcore: registered new interface driver pcwd_usb
Code:
[    0.518025] usbcore: registered new interface driver usbhid
Code:
[    0.518032] usbhid: USB HID core driver
Code:
[    0.685734] reg-fixed-voltage vcc5v0_usb20_otg: nonexclusive access to GPIO for vcc5v0_usb20_otg
Code:
[    1.855035] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01
Code:
[    1.855074] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Code:
[    1.855098] usb usb5: Product: xHCI Host Controller
Code:
[    1.855117] usb usb5: Manufacturer: Linux 6.1.12-1-MANJARO-ARM xhci-hcd
Code:
[    1.855134] usb usb5: SerialNumber: xhci-hcd.0.auto





Looking for block devices doesn't show any SATA hard drives:
Code:
$ lsblk
NAME         MAJ:MIN RM   SIZE RO TYPE MOUNTPOINTS
mmcblk1      179:0    0  14.6G  0 disk
├─mmcblk1p1  179:1    0 457.8M  0 part /boot
└─mmcblk1p2  179:2    0  14.1G  0 part /
mmcblk1boot0 179:32   0     4M  1 disk
mmcblk1boot1 179:64   0     4M  1 disk
zram0        253:0    0   5.5G  0 disk [SWAP]


Code:
$ lsscsi

<blank>


Code:
$ sudo fdisk -l
Disk /dev/mmcblk1: 14.59 GiB, 15665725440 bytes, 30597120 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: gpt
Disk identifier: 9D5D28C6-63B7-4C32-BA44-DAAF62A38685

Device           Start      End  Sectors   Size Type
/dev/mmcblk1p1   62500  1000000   937501 457.8M Microsoft basic data
/dev/mmcblk1p2 1000001 30597086 29597086  14.1G Linux filesystem


Disk /dev/mmcblk1boot0: 4 MiB, 4194304 bytes, 8192 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/mmcblk1boot1: 4 MiB, 4194304 bytes, 8192 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/zram0: 5.48 GiB, 5886869504 bytes, 1437224 sectors
Units: sectors of 1 * 4096 = 4096 bytes
Sector size (logical/physical): 4096 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes

Hey there! Did you get this working by any chance? Facing the same problem
  Reply
#3
(08-27-2023, 07:50 AM)Mastermindaxe Wrote: Hey there! Did you get this working by any chance? Facing the same problem

Unfortunately not, sorry.
  Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  irradium (based on crux linux) Quartz64 riscv64, aarch64 mara 0 27 Yesterday, 12:53 PM
Last Post: mara
  DietPi OS for Quartz64 MichaIng 45 9,450 12-12-2023, 02:26 AM
Last Post: sickos
  Armbian and LibreELEC and AltLinux for Quartz64 balbes150 147 55,686 11-17-2023, 08:21 AM
Last Post: balbes150
  slarm64 (unofficial slackware) Quartz64 RK3566 (aarch64) mara 56 39,679 10-17-2023, 10:55 AM
Last Post: mara
  kernel errors for on-board ethernet beepy 1 520 07-22-2023, 09:31 PM
Last Post: beepy
  How the reset Quartz64-b onboard memory (emmc) beepy 2 701 07-20-2023, 10:44 PM
Last Post: beepy
  crux-arm Quartz64 RK3566 (aarch64) mara 5 4,782 10-29-2022, 06:55 AM
Last Post: mara
  Ov5647 camera attached via csi to Quartz64 /Soquartz Randomuser 0 1,155 07-21-2022, 01:08 PM
Last Post: Randomuser
  Armbian on Quartz64 dieselnutjob 34 25,682 03-17-2022, 06:29 AM
Last Post: balbes150
  PCIe not working on custom board (soquartz) dferrg 1 1,924 02-23-2022, 04:31 AM
Last Post: dferrg

Forum Jump:


Users browsing this thread: 1 Guest(s)