05-03-2021, 01:23 AM
I have same problem.
I received my PinePhone Beta Edition with convergence package a few days ago. I saw other people using display output on Phosh, so I tried Mobian stable (20210324) and Mobian unstable, but could not get display output working. I also tried postmarketOS-edge with Sxmo so that I can see the output from xrandr, but the phone did not recognized any external display.
I have tested the dock bar on my tablet with Debian-Phosh, and everything worked. So the dock bar is fine. Then I tried flashing ANX7688 firmware on PinePhone, but nothing has changed.
At this point, I have no idea how to investigate the problem any further. Any help would be much appreciated.
Here is my dmesg on Mobian stable.
I received my PinePhone Beta Edition with convergence package a few days ago. I saw other people using display output on Phosh, so I tried Mobian stable (20210324) and Mobian unstable, but could not get display output working. I also tried postmarketOS-edge with Sxmo so that I can see the output from xrandr, but the phone did not recognized any external display.
I have tested the dock bar on my tablet with Debian-Phosh, and everything worked. So the dock bar is fine. Then I tried flashing ANX7688 firmware on PinePhone, but nothing has changed.
At this point, I have no idea how to investigate the problem any further. Any help would be much appreciated.
Here is my dmesg on Mobian stable.
Code:
[ 236.430531] usb 1-1: new high-speed USB device number 2 using ehci-platform
[ 236.561923] anx7688 1-0028: status irq
[ 236.562534] anx7688 1-0028: soft = 0x01
[ 236.563631] anx7688 1-0028: recv ocm message cmd=22 05 16 32 c8 00 12 d9
[ 236.595348] usb 1-1: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.00
[ 236.603612] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 236.618530] usb 1-1: Product: USB2.0 HUB
[ 236.624725] hub 1-1:1.0: USB hub found
[ 236.630884] hub 1-1:1.0: 4 ports detected
[ 236.692061] anx7688 1-0028: status irq
[ 236.692594] anx7688 1-0028: soft = 0x01
[ 236.693721] anx7688 1-0028: recv ocm message cmd=1 05 01 2c 91 01 05 37
[ 236.714554] anx7688 1-0028: status irq
[ 236.715155] anx7688 1-0028: soft = 0x01
[ 236.716246] anx7688 1-0028: recv ocm message cmd=2 11 02 39 06 00 6c 00 00 00 00 12 02 20 a0 db 00 00 00 93
[ 236.718463] anx7688 1-0028: status irq
[ 236.719010] anx7688 1-0028: soft = 0x01
[ 236.720160] anx7688 1-0028: recv ocm message cmd=3 09 03 39 06 01 ff 00 00 00 00 b5
[ 236.722061] anx7688 1-0028: status irq
[ 236.722626] anx7688 1-0028: soft = 0x01
[ 236.723714] anx7688 1-0028: recv ocm message cmd=39 09 27 03 80 01 ff 05 0c 00 00 3c
[ 236.733424] anx7688 1-0028: status irq
[ 236.733937] anx7688 1-0028: soft = 0x01
[ 236.735052] anx7688 1-0028: recv ocm message cmd=25 01 19 e6
[ 237.030564] usb 1-1.1: new full-speed USB device number 3 using ehci-platform
[ 237.250008] usb 1-1.1: New USB device found, idVendor=0639, idProduct=7210, bcdDevice=68.4d
[ 237.258577] usb 1-1.1: New USB device strings: Mfr=1, Product=4, SerialNumber=2
[ 237.267671] usb 1-1.1: Product: Billboard
[ 237.276547] usb 1-1.1: Manufacturer: Chrontel
[ 237.285498] usb 1-1.1: SerialNumber: CH7210
[ 237.474437] usb 1-1.2: new high-speed USB device number 4 using ehci-platform
[ 237.697216] usb 1-1.2: New USB device found, idVendor=0fe6, idProduct=9900, bcdDevice=20.00
[ 237.706299] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 237.713699] usb 1-1.2: Product: 10/100M LAN
[ 237.719449] usb 1-1.2: Manufacturer: CoreChips
[ 237.724018] usb 1-1.2: SerialNumber: 00000000008A
[ 237.800937] cdc_ether 1-1.2:2.0 eth0: register 'cdc_ether' at usb-1c1a000.usb-1.2, CDC Ethernet Device, 00:00:00:00:00:8a
[ 237.813176] usbcore: registered new interface driver cdc_ether
[ 237.861985] cdc_ether 1-1.2:2.0 enx00000000008a: renamed from eth0
[ 237.914479] usb 1-1.3: new low-speed USB device number 5 using ehci-platform
[ 238.137466] usb 1-1.3: New USB device found, idVendor=1a81, idProduct=2010, bcdDevice= 1.00
[ 238.145941] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 238.153305] usb 1-1.3: Product: USB KEYBOARD
[ 238.157641] usb 1-1.3: Manufacturer: SINO WEALTH
[ 238.170594] input: SINO WEALTH USB KEYBOARD as /devices/platform/soc/1c1a000.usb/usb1/1-1/1-1.3/1-1.3:1.0/0003:1A81:2010.0001/input/input6
[ 238.244431] hid-generic 0003:1A81:2010.0001: input,hidraw0: USB HID v1.10 Keyboard [SINO WEALTH USB KEYBOARD] on usb-1c1a000.usb-1.3/input0
[ 238.266125] input: SINO WEALTH USB KEYBOARD System Control as /devices/platform/soc/1c1a000.usb/usb1/1-1/1-1.3/1-1.3:1.1/0003:1A81:2010.0002/input/input7
[ 238.339707] input: SINO WEALTH USB KEYBOARD Consumer Control as /devices/platform/soc/1c1a000.usb/usb1/1-1/1-1.3/1-1.3:1.1/0003:1A81:2010.0002/input/input8
[ 238.356125] hid-generic 0003:1A81:2010.0002: input,hiddev1,hidraw1: USB HID v1.10 Device [SINO WEALTH USB KEYBOARD] on usb-1c1a000.usb-1.3/input1
[ 238.550595] usb 1-1.4: new full-speed USB device number 6 using ehci-platform
[ 238.785994] usb 1-1.4: New USB device found, idVendor=056e, idProduct=00e3, bcdDevice= 2.10
[ 238.796567] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 238.806800] usb 1-1.4: Product: ELECOM BlueLED Mouse
[ 238.813604] usb 1-1.4: Manufacturer: ELECOM
[ 238.839445] input: ELECOM ELECOM BlueLED Mouse as /devices/platform/soc/1c1a000.usb/usb1/1-1/1-1.4/1-1.4:1.0/0003:056E:00E3.0003/input/input9
[ 238.867577] hid-generic 0003:056E:00E3.0003: input,hidraw2: USB HID v1.11 Mouse [ELECOM ELECOM BlueLED Mouse] on usb-1c1a000.usb-1.4/input0
[ 239.551346] anx7688 1-0028: dp state changed to 0x03
[ 244.303011] mmcblk2: p1 p2
[ 266.174888] anx7688 1-0028: dp state changed to 0x00
[