06-10-2016, 01:15 AM
(06-10-2016, 12:03 AM)dkryder Wrote: i thought i would mention that i have had a few cases of no power led being lit up and what i had to do was disconnect the power cord from the board then reconnect then plug the power adapter into the wall socket. usually after shutdown i can simply unplug the power adapter from socket then plug in to boot. however, for a reason i do not understand, a few times i had to unplug the cord from the board and plug it back in. might be a faulty circuit in my power supply.
My guess is you unplug and plug again very fast, the capacitor on the board still hold some charge and not yet fully recharge, cause the board still thinking it is in standby mode.