05-12-2016, 09:18 AM
You can use an old router (with 100 Mb ports) from a few years ago and change the settings to make it behave as a switch. I did this with my old D-Link router.
There are general instruction on Youtube. Try google for more detailed instructions.
Basically you need to:
1. Turn off WIFI
2. Disable DHCP
3. Set Router IP address so i won't conflict with your other router(s).
4. Disable DNS
Hope this helps.
There are general instruction on Youtube. Try google for more detailed instructions.
Basically you need to:
1. Turn off WIFI
2. Disable DHCP
3. Set Router IP address so i won't conflict with your other router(s).
4. Disable DNS
Hope this helps.
