Main Board Swap: Camera connector problems
11-19-2020, 11:50 AM
ps - also check the little rubber "shroud" around the front LED, proximity sensor & ? is migrated to the new board (or in fact easier to locate in the case) if it sticks to the old board when you remove it.
My mobo came with nothing usable on it, no problem burning an image via currant jumpdrive.
Didnt have any particular problems with camera connectors - they just open from cable side rather than back side like the other 2 connectors.
My mobo came with nothing usable on it, no problem burning an image via currant jumpdrive.
Didnt have any particular problems with camera connectors - they just open from cable side rather than back side like the other 2 connectors.
- PinePhone BraveHeart now v1.2b 3/32Gb daily driver, Tow-boot with pmOS/SXMO on eMMC
- PinePhone pmOS Community Edition 2/16Gb driving my picture frame, Tow-boot with pmOS/SXMO on eMMC
- PinePhone Pro Explorer Edition, Tow-boot on SPI, Arch/SXMO on eMMC
- ROCKPro64 v2.1 2GB, 16Gb eMMC retired in favour of a fruity upgrade
