Maximum current does not matter as long as it is enough. Voltage is critical, it will damage the board when using a PSU with more than 5.1V. Also the micro USB cable is a problem. Use a short one (like 30cm) with low AWG (like 20) or power through Euler bus directly.
|
Power supply questions
|
| Possibly Related Threads… | |||||
| Thread | Author | Replies | Views | Last Post | |
| Pine a64+ power supply | davidspencer | 0 | 594 |
03-18-2026, 01:02 AM Last Post: davidspencer |
|
| Pine64+ power button | PaddyChan | 0 | 4,985 |
09-14-2020, 09:55 AM Last Post: PaddyChan |
|
| UK power supply (Pinebook Pro 64) | skobi | 0 | 3,474 |
11-17-2019, 04:55 AM Last Post: skobi |
|
| Won't power on/boot -- kickstarter A64 2GB | fuzzycuffs | 3 | 9,245 |
02-22-2019, 03:25 AM Last Post: GaryFunk |
|
| Supply DC power to Pine64 via Pi-2 Connector & Euler Bus? | crapped | 2 | 8,509 |
05-24-2018, 01:58 AM Last Post: crapped |
|
| short boot time after power-up | bongo | 7 | 15,624 |
10-31-2017, 08:02 AM Last Post: bongo |
|
| PINE64/ROCK64 infra receiver power on | cserem | 1 | 5,309 |
10-06-2017, 07:25 AM Last Post: MarkHaysHarris777 |
|
| Sufficient supply for product integration? | SlowBro | 4 | 9,855 |
02-19-2017, 10:40 AM Last Post: dkryder |
|
| Power-on pine by remote | kleintvra | 1 | 4,335 |
08-11-2016, 02:48 PM Last Post: MarkHaysHarris777 |
|
| Chgled Power Reset | rduerst | 4 | 9,895 |
07-22-2016, 09:22 PM Last Post: pfeerick |
|
Users browsing this thread: 1 Guest(s)