05-28-2020, 06:28 PM
(01-26-2020, 12:57 AM)S265 Wrote:(11-02-2019, 05:34 PM)bebop_man Wrote:(11-02-2019, 12:53 PM)TAAPAye Wrote:(11-01-2019, 11:12 PM)hsm89cheu Wrote: Received my PBP today and I have the same problem to boot up. I removed the back panel and pressed the reset button but still not working. Does anyone have a solution?
I flipped the eMMC switch (24 on https://wiki.pine64.org/index.php/Pinebook_Pro_Main_Page#Accessing_the_Internals_-_Disassembly_and_Reassembly)
and my computer now boots.
Which direction is the switch supposed to be ?
EDIT: Success! I flipped the emmc switch to up (towards the hinge) pressed reset, and then power, the system powered on finally!
This worked for me as well after encountering a problem where the system would not boot.
Many thanks!
Yes! This is the only fix that I found that allowed my machine to boot - my eMMC switch was disabled from the factory.
Since I had a bit of trouble locating where the eMMC switch was at first, I created a YouTube video showing how to fix this: https://www.youtube.com/watch?v=LWbncyt6xfg. Hope it helps!