+- PINE64 (https://forum.pine64.org)
+-- Forum: Pinebook Pro (https://forum.pine64.org/forumdisplay.php?fid=111)
+--- Forum: Pinebook Pro Hardware and Accessories (https://forum.pine64.org/forumdisplay.php?fid=116)
+--- Thread: Pinebook Pro won't turn on (/showthread.php?tid=8150)
Pinebook Pro won't turn on - codebreaker - 10-31-2019
I just received my Pinebook Pro. I opened the box, and hit the power button, but nothing happens. I plugged the charger in, and I see a tiny LED near the barrel connector that is red, but then it turns off after about a minute. No other lights come on, and after a half hour of being plugged into the charger, the unit still won't power on. Any suggestions?
RE: Pinebook Pro won't turn on - Wizzard - 10-31-2019
(10-31-2019, 01:52 PM)codebreaker Wrote: I just received my Pinebook Pro. I opened the box, and hit the power button, but nothing happens. I plugged the charger in, and I see a tiny LED near the barrel connector that is red, but then it turns off after about a minute. No other lights come on, and after a half hour of being plugged into the charger, the unit still won't power on. Any suggestions?How did you hit that button? Short or long hit?
Odoslané z ONEPLUS A5010 pomocou Tapatalku
RE: Pinebook Pro won't turn on - codebreaker - 10-31-2019
(10-31-2019, 02:06 PM)Wizzard Wrote:(10-31-2019, 01:52 PM)codebreaker Wrote: I just received my Pinebook Pro. I opened the box, and hit the power button, but nothing happens. I plugged the charger in, and I see a tiny LED near the barrel connector that is red, but then it turns off after about a minute. No other lights come on, and after a half hour of being plugged into the charger, the unit still won't power on. Any suggestions?How did you hit that button? Short or long hit?
Odoslané z ONEPLUS A5010 pomocou Tapatalku
Both. A tap, and a long hold.
RE: Pinebook Pro won't turn on - hmuller - 10-31-2019
(10-31-2019, 02:08 PM)codebreaker Wrote:(10-31-2019, 02:06 PM)Wizzard Wrote:(10-31-2019, 01:52 PM)codebreaker Wrote: I just received my Pinebook Pro. I opened the box, and hit the power button, but nothing happens. I plugged the charger in, and I see a tiny LED near the barrel connector that is red, but then it turns off after about a minute. No other lights come on, and after a half hour of being plugged into the charger, the unit still won't power on. Any suggestions?How did you hit that button? Short or long hit?
Odoslané z ONEPLUS A5010 pomocou Tapatalku
Both. A tap, and a long hold.
A tap won't turn it on, a press about a second turns it on.
If I understand correctly, the power led should remain lit while connected to the power supply.
RE: Pinebook Pro won't turn on - GLSRacer - 11-01-2019
I'm having the same issue. Long press, 1 second press, tap, etc, nothing works. I'm wondering if something wasn't connected correctly inside.
RE: Pinebook Pro won't turn on - bebop_man - 11-01-2019
Same issue. Red light by the barrel, but no other indication of power. Short presses, long presses, no activity on the panel display or keyboard lights
RE: Pinebook Pro won't turn on - GLSRacer - 11-01-2019
I'm going to remove the back panel tomorrow morning and see if everything is connected properly.
RE: Pinebook Pro won't turn on - bebop_man - 11-01-2019
(11-01-2019, 06:51 PM)GLSRacer Wrote: I'm going to remove the back panel tomorrow morning and see if everything is connected properly.
I'm looking at mine now, and everything seems to connected. I even tried disconnecting the battery and connecting the bypass. Still didn't power on.
I even removed AC power, Disconnected the bypass, replaced the battery, and held down the power switch for 30 secs. Still nothing
RE: Pinebook Pro won't turn on - GLSRacer - 11-01-2019
Success! I reseated the eMMC again with a bit more force and this time there was a more positive click. I then hit the reset button on the board and the laptop booted up.
RE: Pinebook Pro won't turn on - bebop_man - 11-01-2019
(11-01-2019, 08:09 PM)GLSRacer Wrote: Success! I reseated the eMMC again with a bit more force and this time there was a more positive click. I then hit the reset button on the board and the laptop booted up.
I just tried the same thing, and I didn't have any success
