05-23-2020, 07:31 AM
(05-21-2020, 05:29 AM)lgtrombetta Wrote: To be more precise, the yellow section got completely separated from the green PCB board, and therefore both the speaker and the motor are no longer connected.
I didn't open the phone, but these kind of cables are usually solderable.
So if these pads on PCB are intact (very likely) and flex cable is not destructed or at least it has the soldered wires accessible (at least partly), then it can be soldered to its place by somebody familiar with soldering iron.
I don't say you should do it (if you don't have experience in soldering), but I think you may find somebody around which would worth a try.
