debian+phosh running on PinePhone

[buskmann]

Did a "sudo apt upgrade" for more or less one hour ago, and it stopped at 84%. Last thing it put out was: e2scrub_all.service is a disabled or a static unit not running, not starting it.

Hmmm, I had a similar issue, could you share the full apt log so I can double-check with mine?

Dont know if this works, but i Attached the logfile to this post.. Its a bit to big to post here

Just in case, heres the last part:

(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 69240 files and directories currently installed.)
Preparing to unpack .../00-libasan5_9.3.0-6_arm64.deb ...
Unpacking libasan5:arm64 (9.3.0-6) over (9.3.0-5) ...
Preparing to unpack .../01-g++-9_9.3.0-6_arm64.deb ...
Unpacking g++-9 (9.3.0-6) over (9.3.0-5) ...
Preparing to unpack .../02-gcc-9_9.3.0-6_arm64.deb ...
Unpacking gcc-9 (9.3.0-6) over (9.3.0-5) ...
Preparing to unpack .../03-libstdc++-9-dev_9.3.0-6_arm64.deb ...
Unpacking libstdc++-9-dev:arm64 (9.3.0-6) over (9.3.0-5) ...
Preparing to unpack .../04-libgcc-9-dev_9.3.0-6_arm64.deb ...
Unpacking libgcc-9-dev:arm64 (9.3.0-6) over (9.3.0-5) ...
Preparing to unpack .../05-cpp-9_9.3.0-6_arm64.deb ...
Unpacking cpp-9 (9.3.0-6) over (9.3.0-5) ...
Preparing to unpack .../06-gcc-9-base_9.3.0-6_arm64.deb ...
Unpacking gcc-9-base:arm64 (9.3.0-6) over (9.3.0-5) ...
Preparing to unpack .../07-libibus-1.0-5_1.5.22-2_arm64.deb ...
Unpacking libibus-1.0-5:arm64 (1.5.22-2) over (1.5.22-1) ...
Preparing to unpack .../08-gir1.2-ibus-1.0_1.5.22-2_arm64.deb ...
Unpacking gir1.2-ibus-1.0:arm64 (1.5.22-2) over (1.5.22-1) ...
Preparing to unpack .../09-gnome-session-bin_3.36.0-2_arm64.deb ...
Unpacking gnome-session-bin (3.36.0-2) over (3.36.0-1) ...
Preparing to unpack .../10-gnome-session_3.36.0-2_all.deb ...
Unpacking gnome-session (3.36.0-2) over (3.36.0-1) ...
Preparing to unpack .../11-gnome-session-common_3.36.0-2_all.deb ...
Unpacking gnome-session-common (3.36.0-2) over (3.36.0-1) ...
Preparing to unpack .../12-libcom-err2_1.45.6-1_arm64.deb ...
Unpacking libcom-err2:arm64 (1.45.6-1) over (1.45.5-2) ...
Preparing to unpack .../13-libgtk3-perl_0.037-1_all.deb ...
Unpacking libgtk3-perl (0.037-1) over (0.036-2) ...
Preparing to unpack .../14-libss2_1.45.6-1_arm64.deb ...
Unpacking libss2:arm64 (1.45.6-1) over (1.45.5-2) ...
Preparing to unpack .../15-pci.ids_0.0~2020.03.20-1_all.deb ...
Unpacking pci.ids (0.0~2020.03.20-1) over (0.0~2020.02.22-1) ...
Preparing to unpack .../16-sudo_1.8.31p1-1_arm64.deb ...
Unpacking sudo (1.8.31p1-1) over (1.8.31-1) ...
Preparing to unpack .../17-pinephone-modem-scripts_0.4_arm64.deb ...
Unpacking pinephone-modem-scripts (0.4) over (0.3) ...
Preparing to unpack .../18-pinephone-base_0.2.4_arm64.deb ...
Unpacking pinephone-base (0.2.4) over (0.2.3) ...
Preparing to unpack .../19-pinephone-multimedia_0.2.4_arm64.deb ...
Unpacking pinephone-multimedia (0.2.4) over (0.2.3) ...
Preparing to unpack .../20-pinephone-tweaks_0.4_arm64.deb ...
Unpacking pinephone-tweaks (0.4) over (0.3) ...
Setting up pci.ids (0.0~2020.03.20-1) ...
Setting up pinephone-multimedia (0.2.4) ...
Setting up libibus-1.0-5:arm64 (1.5.22-2) ...
Setting up gnome-session-bin (3.36.0-2) ...
Setting up libcom-err2:arm64 (1.45.6-1) ...
Setting up libgomp1:arm64 (10-20200321-1) ...
Setting up pinephone-modem-scripts (0.4) ...
Setting up libatomic1:arm64 (10-20200321-1) ...
Setting up libss2:arm64 (1.45.6-1) ...
Setting up sudo (1.8.31p1-1) ...
Setting up logsave (1.45.6-1) ...
Setting up libubsan1:arm64 (10-20200321-1) ...
Setting up gnome-session-common (3.36.0-2) ...
Setting up gir1.2-ibus-1.0:arm64 (1.5.22-2) ...
Setting up libcc1-0:arm64 (10-20200321-1) ...
Setting up liblsan0:arm64 (10-20200321-1) ...
Setting up libgtk3-perl (0.037-1) ...
Setting up libitm1:arm64 (10-20200321-1) ...
Setting up libpython3-stdlib:arm64 (3.8.2-2) ...
Setting up gcc-9-base:arm64 (9.3.0-6) ...
Setting up libtsan0:arm64 (10-20200321-1) ...
Setting up pinephone-tweaks (0.4) ...
Creating boot script...
Image Name:   pinephone
Created:      Sun Mar 22 10:57:41 2020
Image Type:   AArch64 Linux Script (uncompressed)
Data Size:    811 Bytes = 0.79 KiB = 0.00 MiB
Load Address: 00000000
Entry Point:  00000000
Contents:
   Image 0: 803 Bytes = 0.78 KiB = 0.00 MiB
Setting up e2fsprogs (1.45.6-1) ...
Installing new version of config file /etc/mke2fs.conf ...
update-initramfs: deferring update (trigger activated)
e2scrub_all.service is a disabled or a static unit not running, not starting it.