A true mainline Linux Kernel for the Pinebook Pro
#10
Hi Tobias

I've been kicking the tyres a bit here. Overall its looking good but I am finding that the display is a bit hit and miss starting up (it worked for about four/five reboots yesterday but today I haven't had a successful boot yet).

Thankfully I grabbed the dmesg for the good boots so I've been able to diff the logs and, other than USB interleaving differently, the only new messages on a "bad" boot are edp timeouts/failures which makes sense given the problem ;-) (full log is here if you want to see it... but nicely tucked out of the way if you don't: https://gist.github.com/daniel-thompson/...ccf59796dd ):

Code:
[  228.390347] [drm:analogix_dp_bridge_atomic_enable [analogix_dp]] *ERROR* failed to get hpd single ret = -110
[  228.390412] rockchip-dp ff970000.edp: failed to set bridge, retry: 0
[  228.539603] [drm:analogix_dp_bridge_atomic_enable [analogix_dp]] *ERROR* failed to get hpd single ret = -110
[  228.539772] rockchip-dp ff970000.edp: failed to set bridge, retry: 1
[  228.653224] [drm:analogix_dp_bridge_atomic_enable [analogix_dp]] *ERROR* failed to get hpd single ret = -110
[  228.653356] rockchip-dp ff970000.edp: failed to set bridge, retry: 2
[  228.766128] [drm:analogix_dp_bridge_atomic_enable [analogix_dp]] *ERROR* failed to get hpd single ret = -110
[  228.766200] rockchip-dp ff970000.edp: failed to set bridge, retry: 3
[  228.881911] [drm:analogix_dp_bridge_atomic_enable [analogix_dp]] *ERROR* failed to get hpd single ret = -110
[  228.882057] rockchip-dp ff970000.edp: failed to set bridge, retry: 4
[  228.882101] rockchip-dp ff970000.edp: too many times retry set bridge, give it up

I'll go looking for more clues later today but I just wondered if you have seen anything like this yourself as you've been working.
PineTime: wasp-os and MicroPython, Pinebook Pro:  Debian Bullseye


Messages In This Thread
RE: A true mainline Linux Kernel for the Pinebook Pro - by danielt - 11-08-2019, 04:39 AM
5.12 - by kalpazanius - 04-26-2021, 04:38 PM
RE: 5.12 - by ramsey - 06-19-2021, 05:36 PM
RE: 5.12 - by linuxad - 06-20-2021, 09:26 AM

Possibly Related Threads…
Thread Author Replies Views Last Post
  Boot Order in Pinebook Pro food 11 4,863 03-28-2025, 10:08 AM
Last Post: DrYak
  Void Linux: missing firmware from pinebookpro-firmware? remph 0 357 12-15-2024, 01:58 PM
Last Post: remph
  Upgrading Armbian from v24.2.1 gnome, breaks pinebook pro Sb2024 0 495 11-10-2024, 02:50 PM
Last Post: Sb2024
  Attempting to install Void Linux, boots into a black screen 9a3eedi 1 1,979 09-28-2024, 09:23 AM
Last Post: throwawayforvoid
  Pinebook pro won't boot after bootloader installation jwensouls 4 2,076 08-21-2024, 04:17 AM
Last Post: KC9UDX
  Slackware Linux working on PBP vxzero 0 1,005 06-05-2024, 04:30 PM
Last Post: vxzero
  [Pinebook Pro/Mobian/XFCE4] can fix touch or screen in greeter not both SynthGal 0 754 05-31-2024, 09:42 AM
Last Post: SynthGal
  Debian on Pinebook Pro u974615 7 4,298 03-31-2024, 10:11 AM
Last Post: u974615
  Pinebook Pro upgrading from the factory image yamsoup 12 6,414 02-22-2024, 04:02 PM
Last Post: tllim
  Help installing Manjaro on eMMC of Pinebook Pro pine4546464 4 4,095 12-13-2023, 07:22 PM
Last Post: trillobite

Forum Jump:


Users browsing this thread: 2 Guest(s)