11-05-2019, 01:55 PM
(11-05-2019, 01:36 PM)xircledev Wrote:(11-03-2019, 10:36 PM)hmuller Wrote:(11-03-2019, 12:43 PM)zaius Wrote: I just used the Pine64 installer to flash the SD.
According to someone on Discord, he needed to "edit the extlinux.conf to correct the partition UUID's" to get it to work.
Yes, this has been confirmed in this thread:
https://forum.pine64.org/showthread.php?...1#pid51491
I intend test this out tomorrow.
This worked for me but what steps can I take to re-image my machine so I don't need to boot from the SD all the time?
I put a copy of the image on a usb flash drive, booted the SD and then dd'd the image from the usb drive to the eMMC . But just to be safe, after the dd finished, I mounted the boot partition on the eMMC and edited the extlinux.conf there to replace "root=PARTUUID=deedbeef-02" with the device holding the root partition on the eMMC "root=/dev/mmcblk1p2".
Matthew