10-08-2019, 04:22 AM
(10-04-2019, 06:22 PM)Omli Wrote: The SSD rises ca. 7.5mm above the plastik from the Case.Like, do you plan to distribute shorted SSD holder, like 2242 or 2260? 2280 one didn't work out.
I testet the SSD holder alone without SSD and the brass holder mounted.
The brass pice alone is to hight. The Brass pice is 0.5mm higher then the SSD.
I trie to filing the brass pice down and will try then again.
(10-03-2019, 11:01 AM)neilman Wrote: Typed dmesg from Pinebook's terminal - big list of stuff.
Tried to use my Pinebook 1080 USB to 3.5mm 4-pole plug console lead from my Windows 7 machine as COM9 - no joy at all with any terminal program (including Putty) at 9600 - what speed should work?
Then tried SSH with Putty using "rock" credentials - success. Typed dmesg but obviously only get current session from start?
Plugged in the USB-C monitor connection - grand picture showing.
Shut down system (pine-leave-shutdown) int and ext screens go blank, Putty reports "server unexpectedly closed network connection". Power LED stays on.
Wait a while, no change. Unplug USB-C lead and within a few seconds the Pinebook turns off.
The Pinebook definitely doesn't like (my) USB-C monitor to be connected when shutting down.
Battery down to 15% so put it on charge. Can resume fiddling later when the charge LED goes out.
You can use netconsole to gather logs on poweroff:
https://wiki.ubuntu.com/Kernel/Netconsole
https://wiki.archlinux.org/index.php/Netconsole
https://debamax.com/blog/2019/01/03/debu...etconsole/
https://www.kernel.org/doc/Documentation...onsole.txt
