08-02-2018, 11:24 PM
(This post was last modified: 08-05-2018, 12:28 AM by tllim.
Edit Reason: typo
)
(08-01-2018, 04:43 AM)dukla2000 Wrote: Apologies for resuscitating an old thread ...
What is the allowable input voltage range for the ROCKPro64 through the barrel connector?
Somewhere I thought I saw a range up to 17V or more? With 12V recommended. But cant find it. I do have a 19V supply lying around but not the courage to try it without checking.
Didnt order a Pine PSU - had been using an ancient 12V 1.25A wart I had which went to meet its maker when I put a DVD on the USB3Managed to find another wart rated 12V 700mA which is doing OK but am now measuring power/volts etc and it is pretty much at spec with 100% CPU load so no bandwidth for any GPU or power sucking stuff plugged in elsewhere.
PS - found my answer - Pg 11 of schematic says 4.5V < VIN < 18V
Please only plug in 12V power supply to ROCKPro16 board especially when you have PCIe board and 3.5" HDD installed. The ROCKPro64 main board may able to handle higher than 12V supply but other plug in card or device that on 12V rail may not.
