+- PINE64 (https://forum.pine64.org)
+-- Forum: ROCKPRO64 (https://forum.pine64.org/forumdisplay.php?fid=98)
+--- Forum: General Discussion on ROCKPRO64 (https://forum.pine64.org/forumdisplay.php?fid=99)
+--- Thread: Power Supply ordering question (/showthread.php?tid=6073)
Power Supply ordering question - frewind - 05-19-2018
Hi,
When the next batch of RockPro64's comes in I'll be ordering, but just had a quick question on ordering the ROCKPro64 12V 5A EU Power Supply, for people in the UK will this come with the a UK power plug lead or will I have to source this separatly ?
RE: Power Supply ordering question - tllim - 05-19-2018
(05-19-2018, 08:00 AM)frewind Wrote: Hi,
When the next batch of RockPro64's comes in I'll be ordering, but just had a quick question on ordering the ROCKPro64 12V 5A EU Power Supply, for people in the UK will this come with the a UK power plug lead or will I have to source this separatly ?
Current we only supply US or EU plug. For UK, you will need to change to UK plug yourself.
RE: Power Supply ordering question - boudiicca - 05-25-2018
Its a Two Pin "Very Large" wall wart, rather than a laptop 'brick' style kettle lead, So you will need a 2 pin EU to 3 Pin UK converter sadly.
RE: Power Supply ordering question - frewind - 05-25-2018
(05-25-2018, 03:35 AM)boudiicca Wrote: Its a Two Pin "Very Large" wall wart, rather than a laptop 'brick' style kettle lead, So you will need a 2 pin EU to 3 Pin UK converter sadly.
I have one of those, but this must present an issue when using the board for UK commercial projects.
RE: Power Supply ordering question - pfeerick - 05-26-2018
(05-25-2018, 03:35 AM)boudiicca Wrote: Its a Two Pin "Very Large" wall wart, rather than a laptop 'brick' style kettle lead, So you will need a 2 pin EU to 3 Pin UK converter sadly.
Ouch. that won't go down well with some powerpoint socket types... Australia and the US spring to mind when using only two pins... it's going to loose that fight with gravity eventually!
RE: Power Supply ordering question - edupv - 05-31-2018
Can I use a 5V power supply if I use emmc and USB HDD only (no sata) ?
RE: Power Supply ordering question - dukla2000 - 08-01-2018
Apologies for resuscitating an old thread ...
What is the allowable input voltage range for the ROCKPro64 through the barrel connector?
Somewhere I thought I saw a range up to 17V or more? With 12V recommended. But cant find it. I do have a 19V supply lying around but not the courage to try it without checking.
Didnt order a Pine PSU - had been using an ancient 12V 1.25A wart I had which went to meet its maker when I put a DVD on the USB3
Managed to find another wart rated 12V 700mA which is doing OK but am now measuring power/volts etc and it is pretty much at spec with 100% CPU load so no bandwidth for any GPU or power sucking stuff plugged in elsewhere.PS - found my answer - Pg 11 of schematic says 4.5V < VIN < 18V
RE: Power Supply ordering question - tllim - 08-02-2018
(08-01-2018, 04:43 AM)dukla2000 Wrote: Apologies for resuscitating an old thread ...
What is the allowable input voltage range for the ROCKPro64 through the barrel connector?
Somewhere I thought I saw a range up to 17V or more? With 12V recommended. But cant find it. I do have a 19V supply lying around but not the courage to try it without checking.
Didnt order a Pine PSU - had been using an ancient 12V 1.25A wart I had which went to meet its maker when I put a DVD on the USB3
PS - found my answer - Pg 11 of schematic says 4.5V < VIN < 18V
Please only plug in 12V power supply to ROCKPro16 board especially when you have PCIe board and 3.5" HDD installed. The ROCKPro64 main board may able to handle higher than 12V supply but other plug in card or device that on 12V rail may not.
RE: Power Supply ordering question - dkryder - 08-03-2018
there are buck converters of good quality available for decent prices. i have bought some from amazon for less than $6us.