03-15-2016, 09:30 AM
If you've a PSU where you can connect cables with screws and jumper wires you can try it this way: http://linux-sunxi.org/File:Pine64_Power...nector.jpg
(you don't need two cable pairs, one is enough -- I already tested really heavy workloads with the Pine powered through the Euler connector with only one Pin connected to 5V and the other to GND, see the image description). You have to take care that you don't burn your board (wrong polarity!) but if your board runs perfectly stable afterwards you know the reason why it does not now.
(you don't need two cable pairs, one is enough -- I already tested really heavy workloads with the Pine powered through the Euler connector with only one Pin connected to 5V and the other to GND, see the image description). You have to take care that you don't burn your board (wrong polarity!) but if your board runs perfectly stable afterwards you know the reason why it does not now.