greetings,
I have manged to build u-boot as per http://opensource.rock-chips.com/wiki_U-Boot . However, after burning the images to SD card, booting stops before starting my built version of u-boot, i.e., no u-boot prompt!
Serial console output below, also, further down build details.
Can anyone please shed light whats wrong in the process ?
thanks
consoleadam
serial output
========
DDR version 1.06 20170424
In
LPDDR3
786MHz
Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=32 Size=1024MB
ddrconfig:1
OUT
Boot1 Release Time: 2017-05-18, version: 2.43
ChipType = 0x11, emmc reinit
emmc reinit
SdmmcInit=2 20
SdmmcInit=0 0
BootCapSize=0
UserCapSize=7587MB
FwPartOffset=2000 , 0
StorageInit ok = 48039
Raw SecureMode = 0
SecureInit read PBA: 0x4
SecureInit read PBA: 0x404
SecureInit read PBA: 0x804
SecureInit read PBA: 0xc04
SecureInit read PBA: 0x1004
SecureInit ret = 0, SecureMode = 0
LoadTrustBL
No find bl30.bin
No find bl32.bin
Load uboot, ReadLba = 2000
Load OK, addr=0x200000, size=0x7b5f4
RunBL31 0x10000
NOTICE: BL31: v1.3(debug):f947c7e
NOTICE: BL31: Built : 09:28:45, May 31 2017
NOTICE: BL31:Rockchip release version: v1.3
INFO: ARM GICv2 driver initiapteed sec cpu_context!
INFO: boot cpu mask: 1
INFO: platng runtime services
WARNING: No OPTEE provided by BL2 boot loadTEE will return SMC_UNK
ERROR: Error initializing runtime sernormal world
INFO: Entry point address = 0x200000
INFO:
-------------------
Build and Flashing in details:
==================
consoleadam@barbarian:~/rock64$ git clone https://github.com/rockchip-linux/u-boot.git
consoleadam@barbarian:~/rock64/u-boot$ make ARCH=arm -j4 CROSS_COMPILE=aarch64-linux-gnu- distclean
consoleadam@barbarian:~/rock64/u-boot$ make ARCH=arm -j4 CROSS_COMPILE=aarch64-linux-gnu- evb-rk3328_defconfig all
BL2 ddr.bin & idbloader.img
-----------------------------
consoleadam@barbarian:~/rock64/u-boot$ dd if=../rkbin/rk33/rk3328_ddr_786MHz_v1.06.bin of=ddr.bin bs=4 skip=1
consoleadam@barbarian:~/rock64/u-boot$ tools/mkimage -n rk3328 -T rksd -d ddr.bin idbloader.img
consoleadam@barbarian:~/rock64/u-boot$ cat ../rkbin/rk33/rk3328_miniloader_v2.43.bin >> idbloader.img
BL3 trust.img & u-boot.img
----------------------------
consoleadam@barbarian:~/rock64/u-boot$ ../rkbin/tools/loaderimage --pack --uboot ./u-boot-dtb.bin uboot.img 0x200000
consoleadam@barbarian:~/rock64/u-boot$ cp ../rkbin/rk33/rk3328_loader_ddr786_v1.06.243.bin ./
consoleadam@barbarian:~/rock64/u-boot$ cat >trust.ini <<EOF
[VERSION]
MAJOR=1
MINOR=2
[BL30_OPTION]
SEC=0
[BL31_OPTION]
SEC=1
PATH=../rkbin/rk33/rk3328_bl31_v1.34.bin
ADDR=0x10000
[BL32_OPTION]
SEC=0
[BL33_OPTION]
SEC=0
[OUTPUT]
PATH=trust.img
EOF
consoleadam@barbarian:~/rock64/u-boot$ ../rkbin/tools/trust_merger trust.ini
flashing
---------
consoleadam@barbarian:~/rock64/u-boot$ sudo dd if=idbloader.img of=/dev/sdb seek=64 bs=512
consoleadam@barbarian:~/rock64/u-boot$ sudo dd if=uboot.img of=/dev/sdb seek=16384 bs=512
consoleadam@barbarian:~/rock64/u-boot$ sudo dd if=trust.img of=/dev/sdb seek=24576 bs=512
I have manged to build u-boot as per http://opensource.rock-chips.com/wiki_U-Boot . However, after burning the images to SD card, booting stops before starting my built version of u-boot, i.e., no u-boot prompt!
Serial console output below, also, further down build details.
Can anyone please shed light whats wrong in the process ?
thanks
consoleadam
serial output
========
DDR version 1.06 20170424
In
LPDDR3
786MHz
Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=32 Size=1024MB
ddrconfig:1
OUT
Boot1 Release Time: 2017-05-18, version: 2.43
ChipType = 0x11, emmc reinit
emmc reinit
SdmmcInit=2 20
SdmmcInit=0 0
BootCapSize=0
UserCapSize=7587MB
FwPartOffset=2000 , 0
StorageInit ok = 48039
Raw SecureMode = 0
SecureInit read PBA: 0x4
SecureInit read PBA: 0x404
SecureInit read PBA: 0x804
SecureInit read PBA: 0xc04
SecureInit read PBA: 0x1004
SecureInit ret = 0, SecureMode = 0
LoadTrustBL
No find bl30.bin
No find bl32.bin
Load uboot, ReadLba = 2000
Load OK, addr=0x200000, size=0x7b5f4
RunBL31 0x10000
NOTICE: BL31: v1.3(debug):f947c7e
NOTICE: BL31: Built : 09:28:45, May 31 2017
NOTICE: BL31:Rockchip release version: v1.3
INFO: ARM GICv2 driver initiapteed sec cpu_context!
INFO: boot cpu mask: 1
INFO: platng runtime services
WARNING: No OPTEE provided by BL2 boot loadTEE will return SMC_UNK
ERROR: Error initializing runtime sernormal world
INFO: Entry point address = 0x200000
INFO:
-------------------
Build and Flashing in details:
==================
consoleadam@barbarian:~/rock64$ git clone https://github.com/rockchip-linux/u-boot.git
consoleadam@barbarian:~/rock64/u-boot$ make ARCH=arm -j4 CROSS_COMPILE=aarch64-linux-gnu- distclean
consoleadam@barbarian:~/rock64/u-boot$ make ARCH=arm -j4 CROSS_COMPILE=aarch64-linux-gnu- evb-rk3328_defconfig all
BL2 ddr.bin & idbloader.img
-----------------------------
consoleadam@barbarian:~/rock64/u-boot$ dd if=../rkbin/rk33/rk3328_ddr_786MHz_v1.06.bin of=ddr.bin bs=4 skip=1
consoleadam@barbarian:~/rock64/u-boot$ tools/mkimage -n rk3328 -T rksd -d ddr.bin idbloader.img
consoleadam@barbarian:~/rock64/u-boot$ cat ../rkbin/rk33/rk3328_miniloader_v2.43.bin >> idbloader.img
BL3 trust.img & u-boot.img
----------------------------
consoleadam@barbarian:~/rock64/u-boot$ ../rkbin/tools/loaderimage --pack --uboot ./u-boot-dtb.bin uboot.img 0x200000
consoleadam@barbarian:~/rock64/u-boot$ cp ../rkbin/rk33/rk3328_loader_ddr786_v1.06.243.bin ./
consoleadam@barbarian:~/rock64/u-boot$ cat >trust.ini <<EOF
[VERSION]
MAJOR=1
MINOR=2
[BL30_OPTION]
SEC=0
[BL31_OPTION]
SEC=1
PATH=../rkbin/rk33/rk3328_bl31_v1.34.bin
ADDR=0x10000
[BL32_OPTION]
SEC=0
[BL33_OPTION]
SEC=0
[OUTPUT]
PATH=trust.img
EOF
consoleadam@barbarian:~/rock64/u-boot$ ../rkbin/tools/trust_merger trust.ini
flashing
---------
consoleadam@barbarian:~/rock64/u-boot$ sudo dd if=idbloader.img of=/dev/sdb seek=64 bs=512
consoleadam@barbarian:~/rock64/u-boot$ sudo dd if=uboot.img of=/dev/sdb seek=16384 bs=512
consoleadam@barbarian:~/rock64/u-boot$ sudo dd if=trust.img of=/dev/sdb seek=24576 bs=512
