Z-Wave module pinout to make it compatible with Pi b+

Z-Wave module pinout to make it compatible with Pi b+

ebretteville
Pine Initiate

Joined: Jan 2016

Posts: 13

Reputation: 0

09-06-2016, 07:10 AM

(09-06-2016, 07:03 AM)MarkHaysHarris777 Wrote: The 40 pin GPIO of the PI2, and the PI b+ are preceisely identical; be warned however, that the PI bus of the PineA64 board is not precisely compatible with the real Raspberry PI. Some of the pins do not work, and some of them require external pull-up resistors to work.

Yeah the pin number are not the same between PI2/Pine64 and raspberry B+ (Pi1).

No pinout from the dev or schematic of the design?!

Thx Etienne,

Pine64 - 2Gb + Z-Wave (EU) + abs case
[url= http://www.etiennebretteville.com][/url]

Website

Messages In This Thread

Z-Wave module pinout to make it compatible with Pi b+ - by ebretteville - 09-06-2016, 02:18 AM

RE: Z-Wave module pinout to make it compatible with Pi b+ - by MarkHaysHarris777 - 09-06-2016, 07:03 AM

RE: Z-Wave module pinout to make it compatible with Pi b+ - by ebretteville - 09-06-2016, 07:10 AM

RE: Z-Wave module pinout to make it compatible with Pi b+ - by MarkHaysHarris777 - 09-06-2016, 07:16 AM

RE: Z-Wave module pinout to make it compatible with Pi b+ - by ebretteville - 09-06-2016, 07:28 AM

RE: Z-Wave module pinout to make it compatible with Pi b+ - by MarkHaysHarris777 - 09-06-2016, 07:55 AM

RE: Z-Wave module pinout to make it compatible with Pi b+ - by ebretteville - 09-06-2016, 08:40 AM

RE: Z-Wave module pinout to make it compatible with Pi b+ - by MarkHaysHarris777 - 09-06-2016, 08:51 AM

RE: Z-Wave module pinout to make it compatible with Pi b+ - by ebretteville - 09-06-2016, 02:41 PM

RE: Z-Wave module pinout to make it compatible with Pi b+ - by MarkHaysHarris777 - 09-06-2016, 03:22 PM

RE: Z-Wave module pinout to make it compatible with Pi b+ - by ebretteville - 09-06-2016, 11:26 PM

RE: Z-Wave module pinout to make it compatible with Pi b+ - by MarkHaysHarris777 - 09-06-2016, 11:39 PM

Z-Wave module pinout to make it compatible with Pi b+ - by ebretteville - 09-06-2016, 11:45 PM

RE: Z-Wave module pinout to make it compatible with Pi b+ - by MarkHaysHarris777 - 09-07-2016, 12:01 AM

RE: Z-Wave module pinout to make it compatible with Pi b+ - by ebretteville - 09-07-2016, 03:50 AM

RE: Z-Wave module pinout to make it compatible with Pi b+ - by bonterra - 09-07-2016, 05:13 AM

RE: Z-Wave module pinout to make it compatible with Pi b+ - by MarkHaysHarris777 - 09-07-2016, 05:19 AM

RE: Z-Wave module pinout to make it compatible with Pi b+ - by bonterra - 09-07-2016, 06:01 AM

RE: Z-Wave module pinout to make it compatible with Pi b+ - by ebretteville - 09-07-2016, 06:02 AM

RE: Z-Wave module pinout to make it compatible with Pi b+ - by MarkHaysHarris777 - 09-07-2016, 06:31 AM

RE: Z-Wave module pinout to make it compatible with Pi b+ - by bonterra - 09-07-2016, 07:14 AM

RE: Z-Wave module pinout to make it compatible with Pi b+ - by tllim - 09-07-2016, 05:35 PM

RE: Z-Wave module pinout to make it compatible with Pi b+ - by bonterra - 09-08-2016, 12:32 AM

RE: Z-Wave module pinout to make it compatible with Pi b+ - by tllim - 09-13-2016, 06:44 PM

RE: Z-Wave module pinout to make it compatible with Pi b+ - by j.hoekstra - 09-28-2016, 02:31 PM

RE: Z-Wave module pinout to make it compatible with Pi b+ - by Yomet - 09-29-2016, 12:28 AM

RE: Z-Wave module pinout to make it compatible with Pi b+ - by MarkHaysHarris777 - 09-29-2016, 01:15 AM

RE: Z-Wave module pinout to make it compatible with Pi b+ - by Yomet - 09-29-2016, 02:02 AM

RE: Z-Wave module pinout to make it compatible with Pi b+ - by bonterra - 09-29-2016, 06:11 AM

RE: Z-Wave module pinout to make it compatible with Pi b+ - by gparmer - 09-11-2016, 04:11 PM

RE: Z-Wave module pinout to make it compatible with Pi b+ - by MarkHaysHarris777 - 09-12-2016, 07:32 AM

RE: Z-Wave module pinout to make it compatible with Pi b+ - by ebretteville - 09-07-2016, 06:33 AM

RE: Z-Wave module pinout to make it compatible with Pi b+ - by mdsutton - 09-07-2016, 07:53 AM

RE: Z-Wave module pinout to make it compatible with Pi b+ - by MarkHaysHarris777 - 09-07-2016, 08:53 AM

Z-Wave module pinout to make it compatible with Pi b+ - by bonterra - 09-07-2016, 11:49 AM

RE: Z-Wave module pinout to make it compatible with Pi b+ - by ebretteville - 09-07-2016, 11:53 AM

RE: Z-Wave module pinout to make it compatible with Pi b+ - by martinayotte - 09-13-2016, 11:47 AM

RE: Z-Wave module pinout to make it compatible with Pi b+ - by MarkHaysHarris777 - 09-13-2016, 12:00 PM

RE: Z-Wave module pinout to make it compatible with Pi b+ - by martinayotte - 09-13-2016, 12:42 PM

RE: Z-Wave module pinout to make it compatible with Pi b+ - by MarkHaysHarris777 - 09-13-2016, 01:09 PM

RE: Z-Wave module pinout to make it compatible with Pi b+ - by ebretteville - 09-29-2016, 03:46 AM

RE: Z-Wave module pinout to make it compatible with Pi b+ - by MarkHaysHarris777 - 09-29-2016, 04:21 AM

RE: Z-Wave module pinout to make it compatible with Pi b+ - by ebretteville - 09-29-2016, 05:01 AM

RE: Z-Wave module pinout to make it compatible with Pi b+ - by MarkHaysHarris777 - 09-29-2016, 05:18 AM

RE: Z-Wave module pinout to make it compatible with Pi b+ - by KablammoNick - 09-30-2016, 04:01 AM

RE: Z-Wave module pinout to make it compatible with Pi b+ - by Yomet - 09-30-2016, 04:53 AM

RE: Z-Wave module pinout to make it compatible with Pi b+ - by bonterra - 09-30-2016, 07:04 AM

RE: Z-Wave module pinout to make it compatible with Pi b+ - by pfeerick - 09-30-2016, 06:32 PM

RE: Z-Wave module pinout to make it compatible with Pi b+ - by bonterra - 10-01-2016, 07:30 AM

RE: Z-Wave module pinout to make it compatible with Pi b+ - by tllim - 10-02-2016, 02:34 PM

RE: Z-Wave module pinout to make it compatible with Pi b+ - by Yomet - 10-03-2016, 05:47 AM

RE: Z-Wave module pinout to make it compatible with Pi b+ - by j.hoekstra - 10-04-2016, 02:37 PM

RE: Z-Wave module pinout to make it compatible with Pi b+ - by tllim - 10-07-2016, 04:39 PM

RE: Z-Wave module pinout to make it compatible with Pi b+ - by Yomet - 10-22-2016, 05:21 PM

RE: Z-Wave module pinout to make it compatible with Pi b+ - by KablammoNick - 09-30-2016, 06:28 AM

RE: Z-Wave module pinout to make it compatible with Pi b+ - by geneliu - 10-20-2016, 09:13 PM

RE: Z-Wave module pinout to make it compatible with Pi b+ - by tllim - 10-25-2016, 08:11 PM

RE: Z-Wave module pinout to make it compatible with Pi b+ - by j.hoekstra - 04-02-2017, 07:03 AM

RE: Z-Wave module pinout to make it compatible with Pi b+ - by kris240376 - 07-12-2019, 08:55 AM

RE: Z-Wave module pinout to make it compatible with Pi b+ - by NoellEagan - 10-12-2017, 01:01 PM

Possibly Related Threads…
Thread		Author	Replies	Views	Last Post
	Z-Wave and openzwave+node-openzwave-shared	saro	2	6,818	09-01-2017, 05:22 AM Last Post: saro
	Z-Wave - Full and Low Power Inclusion mode	B34N	1	4,680	03-26-2017, 06:03 PM Last Post: B34N
	What cameras are compatible with that ribbon connector?	nayrenitnatsnoc	1	4,240	02-18-2017, 11:50 PM Last Post: dkryder
	KICAD Quick Lib and Module Generator	mbt28	1	5,124	02-12-2017, 10:45 PM Last Post: tllim
	Z Wave Module and still using GPIO	bang	2	6,327	01-16-2017, 03:12 AM Last Post: bang
	Z-Wave US module with adapter	aegrotatio	4	8,049	01-08-2017, 12:03 AM Last Post: aegrotatio
	RaZberry Module (z-wave) need support to get it working!	Luxus	13	21,113	11-03-2016, 02:04 AM Last Post: Luxus
	Z-Wave module problem	vintagewaffle	0	2,584	10-26-2016, 10:50 AM Last Post: vintagewaffle
	Raspberry Pi and Arduino accessories compatible?	Krowyn	6	11,796	10-08-2016, 10:36 AM Last Post: rohan
	Australia/New Zealand Z-Wave module	Jnimmo	46	61,524	10-02-2016, 02:25 PM Last Post: tllim

View a Printable Version

Forum Jump:

Users browsing this thread: 1 Guest(s)

Login




Remember me Lost Password?

About Us