Uhh, looks like a lot of work to do with suggested files.
Let's make another try:
I also have downloaded Digimend's tar archive that included files for installing drivers manually.
I also tried to run MAKE command as suggested but no luck. I receive Error as you can see below:
debian@pine64:~/Downloads/digimend-kernel-drivers-6$ sudo make
[sudo] password for debian:
make -C /lib/modules/3.10.102-3-pine64-longsleep/build SUBDIRS=/home/debian/Downloads/digimend-kernel-drivers-6 modules
make[1]: Entering directory '/lib/modules/3.10.102-3-pine64-longsleep/build'
make[1]: *** No rule to make target 'modules'. Stop.
make[1]: Leaving directory '/lib/modules/3.10.102-3-pine64-longsleep/build'
Makefile:9: recipe for target 'modules' failed
make: *** [modules] Error 2
I also tried to install DEB file but again with no success.
The main problem is:
1. Drawing tablets always are detected as two parts: first is a mouse and second is tablet itself. First part is used for pencil to be able to move around working area and second one is for touch sensitive part of pencil and tablet. My Huion has only second part: It is detected as tablet and pressure of the pen is working. First part, mouse function is not detected at all.
There comes 2nd
2. How to be able to detect mouse part of the tablet so it can be fully functional so I can use pen also for moving cursor ?
Suggested DEB or TAR files should do this job without problem. Looks like something stopped them for fulfilling their objectives to make HUION tablet working properly.
3. I am not experienced user as most of you are so I can't do "magic" things with my OS like you do. I just need help and explanation how to make things work (example: OK, you need to install this and this, then do this and after that try this....)
I tried to contact lenny and his first answer helped me to install linux headers. His second and third answers got two line explanations but he missed the point that I need more detailed answer than these two lines.
I attached TAR archive with all needed data for self installing drivers.
If some one is willing to see where this error is happening and what to change in order to make things work , thank you.
I laso have deb file but due to restrictions I can not upload it here for now.
Regards,
Hmmm,
While waiting for help I tried again to install DEB file but now from terminal:
debian@pine64:/media/debian/590A-85EC/Downloads$ sudo dpkg -i digimend-dkms_6_all.deb
(Reading database ... 231634 files and directories currently installed.)
Preparing to unpack digimend-dkms_6_all.deb ...
------------------------------
Deleting module version: 6
completely from the DKMS tree.
------------------------------
Done.
Unpacking digimend-dkms (6) over (6) ...
Setting up digimend-dkms (6) ...
Loading new digimend-6 DKMS files...
dpkg: warning: version '*-*' has bad syntax: version number does not start with digit
It is likely that 3.10.102-3-pine64-longsleep belongs to a chroot's host
Module build for the currently running kernel was skipped since the
kernel source for this kernel does not seem to be installed.
------------------------------------------------------------------------------------------
So, any clue for this ? I just can understand last lines
Where and how should I download kernel source for 3.10.102-3-pine64-longsleep and install it ?
Regards,
