11-20-2023, 07:02 AM
Well ... what do you think, is it going to work?
To maybe help make some sense of this ...
You can read a lot more detail about who loads what blocks, etc.: RK3399 boot sequence
If you have to disable eMMC as I did because the Manjaro/boot wouldn't boot the SD two-boot install image, there's a little switch on the board.
To maybe help make some sense of this ...
- the hardware looks for boot software in the SD last, after first SPI and then eMMC flash memories.
- what it will find in the eMMc is, along with the Manjaro Linux install, a boot loader that goes back and looks again at the possible boot devices, this time starting with SD.
You can read a lot more detail about who loads what blocks, etc.: RK3399 boot sequence
If you have to disable eMMC as I did because the Manjaro/boot wouldn't boot the SD two-boot install image, there's a little switch on the board.