Pine64 not booting with image

[m16bishop]

Still no joy.
I don't see anything on my display. It looks like the device is not trying to boot. I do see a power LED come on and that is it.


I am using a brand new PNY Prime Performance 64GB micro SD XC card.
Thank you,

Mike

This is what I did on the second try,
TheM5:$ diskutil list
/dev/disk0
#: TYPE NAME SIZE IDENTIFIER
0: GUID_partition_scheme *500.1 GB disk0
1: EFI EFI 209.7 MB disk0s1
2: Apple_HFS Core SSD 499.8 GB disk0s2
/dev/disk1
#: TYPE NAME SIZE IDENTIFIER
0: GUID_partition_scheme *500.1 GB disk1
1: EFI EFI 209.7 MB disk1s1
2: Apple_HFS Windows 499.8 GB disk1s2
/dev/disk2
#: TYPE NAME SIZE IDENTIFIER
0: GUID_partition_scheme *2.0 TB disk2
1: EFI EFI 209.7 MB disk2s1
2: Apple_HFS Vol3 2.0 TB disk2s2
/dev/disk3
#: TYPE NAME SIZE IDENTIFIER
0: GUID_partition_scheme *2.0 TB disk3
1: EFI EFI 209.7 MB disk3s1
2: Apple_HFS Vol2 2.0 TB disk3s2
/dev/disk4
#: TYPE NAME SIZE IDENTIFIER
0: FDisk_partition_scheme *62.6 GB disk4
1: Windows_FAT_16 BOOT 52.4 MB disk4s1
2: Linux 3.8 GB disk4s2
TheM5:$ diskutil unmountDisk /dev/disk4
Unmount of all volumes on disk4 was successful
TheM5:$ cd downloads
TheM5:downloads macuser$ sudo dd if=pine64-image-debianmate-310101bsp.img of=/dev/rdisk4 bs=1m
Password:
3684+0 records in
3684+0 records out
3862953984 bytes transferred in 320.852352 secs (12039662 bytes/sec)
TheM5:downloads macuser$