+- PINE64 (https://forum.pine64.org)
+-- Forum: PINE A64(+) (https://forum.pine64.org/forumdisplay.php?fid=4)
+--- Forum: Linux on Pine A64(+) (https://forum.pine64.org/forumdisplay.php?fid=6)
+---- Forum: Debian (https://forum.pine64.org/forumdisplay.php?fid=24)
+---- Thread: Pine64 not booting with image (/showthread.php?tid=1292)
Pine64 not booting with image - m16bishop - 06-07-2016
hi,
I am using pine64-image-debianmate-310101bsp.img.
I setup my 64 SD card on my Mac Pro.
Then I went to boot the Pine64, device powered up but I saw not boot sequence on the Dell display. It's an old 19" display. Should I have at least since the typical ASCII boot characters and info?
These are the steps I used to get myself in this mess...
Unmount the SD
TheM5:$ diskutil unmountDisk /dev/disk4
Unmount of all volumes on disk4 was successful
TheM5:$
unxz the image:
TheM5:$ ls *.xz
pine64-image-debianmate-310101bsp.img.xz
TheM5:$ unxz pine64-image-debianmate-310101bsp.img.xz
copy the image:
TheM5:$ sudo dd if=pine64-image-debianmate-310101bsp.img of=/dev/disk4 bs=1m
Password:
3684+0 records in
3684+0 records out
3862953984 bytes transferred in 451.011079 secs (8565098 bytes/sec)
TheM5:$
Then go boot the SD card in the Pine64
Nadda on the display. This is a working display I use it with my Raspberry Pi
What did I mess up?
thanks
Mike
RE: Pine64 not booting with image - robertvaldimarsson - 06-08-2016
I'm not a mac person, but as far as i know you need to use rdiskX for writing images to the whole SD card (and not just a partition).
sudo dd if=pine64-image-debianmate-310101bsp.img of=/dev/rdisk4 bs=1m
But maybe my knowledge there is obsolete. maybe it's worth a try.
RE: Pine64 not booting with image - pictus - 06-08-2016
rdisk is faster! I´m on a mac and use "rdisk" instead of "disk". But i don´t know if it can cause problems when using "disk"
RE: Pine64 not booting with image - m16bishop - 06-08-2016
Thanks for the response.
Should I re-insert the SD card back into my mac and go with the posted solution?
sudo dd if=pine64-image-debianmate-310101bsp.img of=/dev/rdisk4 bs=1m
thanks again!
RE: Pine64 not booting with image - robertvaldimarsson - 06-08-2016
(06-08-2016, 09:06 AM)m16bishop Wrote: Thanks for the response.
Should I re-insert the SD card back into my mac and go with the posted solution?
sudo dd if=pine64-image-debianmate-310101bsp.img of=/dev/rdisk4 bs=1m
thanks again!
as i said, i think it's worth a try. if it doesn't work we can put our thinking helmets back on.
Oh and one more thing. Is the SD card class 10 / UHS-1? I had an old class 4 card lying around, and that one did not work. The card has to be fast enough.
RE: Pine64 not booting with image - m16bishop - 06-11-2016
Still no joy.
I don't see anything on my display. It looks like the device is not trying to boot. I do see a power LED come on and that is it.
I am using a brand new PNY Prime Performance 64GB micro SD XC card.
Thank you,
Mike
This is what I did on the second try,
TheM5:$ diskutil list
/dev/disk0
#: TYPE NAME SIZE IDENTIFIER
0: GUID_partition_scheme *500.1 GB disk0
1: EFI EFI 209.7 MB disk0s1
2: Apple_HFS Core SSD 499.8 GB disk0s2
/dev/disk1
#: TYPE NAME SIZE IDENTIFIER
0: GUID_partition_scheme *500.1 GB disk1
1: EFI EFI 209.7 MB disk1s1
2: Apple_HFS Windows 499.8 GB disk1s2
/dev/disk2
#: TYPE NAME SIZE IDENTIFIER
0: GUID_partition_scheme *2.0 TB disk2
1: EFI EFI 209.7 MB disk2s1
2: Apple_HFS Vol3 2.0 TB disk2s2
/dev/disk3
#: TYPE NAME SIZE IDENTIFIER
0: GUID_partition_scheme *2.0 TB disk3
1: EFI EFI 209.7 MB disk3s1
2: Apple_HFS Vol2 2.0 TB disk3s2
/dev/disk4
#: TYPE NAME SIZE IDENTIFIER
0: FDisk_partition_scheme *62.6 GB disk4
1: Windows_FAT_16 BOOT 52.4 MB disk4s1
2: Linux 3.8 GB disk4s2
TheM5:$ diskutil unmountDisk /dev/disk4
Unmount of all volumes on disk4 was successful
TheM5:$ cd downloads
TheM5:downloads macuser$ sudo dd if=pine64-image-debianmate-310101bsp.img of=/dev/rdisk4 bs=1m
Password:
3684+0 records in
3684+0 records out
3862953984 bytes transferred in 320.852352 secs (12039662 bytes/sec)
TheM5:downloads macuser$
RE: Pine64 not booting with image - robertvaldimarsson - 06-11-2016
do you have any other sd card you could try it with? sometimes there are compatibility problems with cards, when they have to be booted. just to rule that one out.
oh and one more thing: are you using a monitor or a tv? do you use any adapters? does the monitor support 1920x1080 @ 60Hz?
RE: Pine64 not booting with image - gridmaster - 06-11-2016
I've had no issues burning my microSD card with my mac. I followed the same instructions that you did.
Maybe you have a bad card or a bad SD card slot.
RE: Pine64 not booting with image - m16bishop - 06-13-2016
Successfully booted. I moved the pine64 over to another display, which I new supported 1080 (for my PS4) and it booted.
It was a display issue and NOT an SD card or OS imaging issue.
Thank you everyone!
Mike
RE: Pine64 not booting with image - robertvaldimarsson - 06-13-2016
(06-13-2016, 09:40 AM)m16bishop Wrote: Successfully booted. I moved the pine64 over to another display, which I new supported 1080 (for my PS4) and it booted.
It was a display issue and NOT an SD card or OS imaging issue.
Thank you everyone!
Mike
YAY. congrats. you can force the system to boot in other resolutions by editing the boot.conf file.