MODEM - Usb problem & couldn't query SIM slots: QMI protocol

[freelectro]

Hi all,

When my pinephone wake up after sleeping period, i have noticed this problems.

-network manager in app parameters disappear.
-network icon not present on left top side

After Few seconds of wake up, all reappear and my SIM is locked.

This logs can be the cause, particulary "06:30:48" line "couldn't query SIM slots: QMI protocol error (94): 'NotSupported'".

Code:

06:30:44 eg25-manager[578]: Successfully reset modem's USB connection 06:30:46 ModemManager[616]: <info> [device /sys/devices/platform/soc/1c1b000.usb/usb1/1-1] creating modem with plugin 'quectel' and '6' ports 06:30:46 ModemManager[616]: <info> [base-manager] modem for device '/sys/devices/platform/soc/1c1b000.usb/usb1/1-1' successfully created 06:30:48 ModemManager[616]: <warn> [modem8] couldn't load carrier config: Operation timed out 06:30:48 ModemManager[616]: <warn> [modem8] couldn't load hardware revision: Couldn't peek QMI port 06:30:48 ModemManager[616]: <warn> [modem8] couldn't load equipment identifier: Couldn't peek QMI port 06:30:48 ModemManager[616]: <warn> [modem8] couldn't load device identifier: Modem interface skeleton unavailable 06:30:48 ModemManager[616]: <warn> [modem8] couldn't load supported bands: Couldn't peek QMI port 06:30:48 ModemManager[616]: <warn> [modem8] couldn't load power state: Couldn't peek QMI port 06:30:48 ModemManager[616]: <warn> [modem8] couldn't load current allowed/preferred modes: Couldn't peek QMI port 06:30:48 ModemManager[616]: <warn> [modem8] couldn't load current bands: Couldn't peek QMI port 06:30:48 ModemManager[616]: <warn> [modem8] (quectel) failed to initialize SIM hot swap ports context: Couldn't get primary port 06:30:48 ModemManager[616]: <warn> [modem8] couldn't query SIM slots: Couldn't peek QMI port 06:30:48 ModemManager[616]: <warn> [modem8] modem couldn't be initialized: Couldn't check unlock status: Couldn't get interface skeleton 06:30:48 ModemManager[616]: <warn> [modem8] error initializing: Operation was cancelled 06:30:48 ModemManager[616]: <warn> [modem9] couldn't query SIM slots: QMI protocol error (94): 'NotSupported' 06:30:49 ModemManager[616]: <info> [modem9] state changed (unknown -> locked) 06:30:49 ModemManager[616]: <warn> [modem9/sim7] couldn't load IMSI: Couldn't read data from UIM: QMI protocol error (82): 'AccessDenied' 06:30:49 ModemManager[616]: <warn> [modem9/sim7] couldn't load operator identifier: Couldn't get home network: QMI protocol error (37): 'UimUninitialized' 06:30:49 ModemManager[616]: <warn> [modem9/sim7] couldn't load operator name: Couldn't get home network: QMI protocol error (37): 'UimUninitialized' 06:30:49 ModemManager[616]: <warn> [modem9/sim7] couldn't load list of preferred networks: Couldn't get preferred networks: QMI protocol error (37): 'UimUninitialized' 06:30:49 ModemManager[616]: <warn> [modem9/sim7] couldn't load GID1: Couldn't read data from UIM: QMI protocol error (82): 'AccessDenied' 06:30:49 ModemManager[616]: <warn> [modem9/sim7] couldn't load GID2: Couldn't read data from UIM: QMI protocol error (82): 'AccessDenied' 06:30:49 ModemManager[616]: <warn> [modem9] couldn't load list of own numbers: Couldn't get MSISDN: QMI protocol error (37): 'UimUninitialized' 06:30:49 ModemManager[616]: <warn> [modem9] error initializing: Modem is currently locked, cannot fully initialize 06:30:49 eg25-manager[578]: ModemManager object `/org/freedesktop/ModemManager1/Modem/9' added

How fix this problem ?




Second thing, today we have talking about me on IRC channel about usb issue problem with modem.

Seems to be the same problem which can be resolved with flash the FOSS firmware modem ! This can be the solution ?

But i don't know the URL of this FOSS firmware modem.

Code:

06:30:40 kernel: sunxi-rsb 1f03400.rsb: RSB running at 4000000 Hz 06:30:40 kernel: musb-sunxi 1c19000.usb: sunxi-musb does not have ULPI bus control register 06:30:40 kernel: usb 1-1: PM: dpm_run_callback(): usb_dev_resume+0x0/0x20 returns -5 06:30:40 kernel: usb 1-1: PM: failed to resume async: error -5 06:30:40 kernel: OOM killer enabled. 06:30:40 kernel: Restarting tasks ... 06:30:40 kernel: usb 1-1: USB disconnect, device number 5 06:30:40 kernel: option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0 06:30:40 kernel: option 1-1:1.0: device disconnected 06:30:40 kernel: option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1 06:30:40 kernel: option 1-1:1.1: device disconnected 06:30:40 systemd-journald[399]: Retention time reached, rotating. 06:30:40 kernel: option1 ttyUSB2: GSM modem (1-port) converter now disconnected from ttyUSB2 06:30:40 kernel: option 1-1:1.2: device disconnected 06:30:40 kernel: option1 ttyUSB3: GSM modem (1-port) converter now disconnected from ttyUSB3 06:30:40 kernel: option 1-1:1.3: device disconnected 06:30:40 kernel: qmi_wwan 1-1:1.4 wwan0: unregister 'qmi_wwan' usb-1c1b000.usb-1, WWAN/QMI device 06:30:40 kernel: done. 06:30:40 kernel: PM: suspend exit 06:30:40 kernel: usb 1-1: new high-speed USB device number 6 using ehci-platform 06:30:40 kernel: usb 1-1: New USB device found, idVendor=2c7c, idProduct=0125, bcdDevice= 3.18 06:30:40 kernel: usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 06:30:40 kernel: usb 1-1: Product: EG25-G 06:30:40 kernel: usb 1-1: Manufacturer: Quectel 06:30:40 kernel: option 1-1:1.0: GSM modem (1-port) converter detected 06:30:40 kernel: usb 1-1: GSM modem (1-port) converter now attached to ttyUSB0 06:30:40 kernel: option 1-1:1.1: GSM modem (1-port) converter detected 06:30:40 kernel: usb 1-1: GSM modem (1-port) converter now attached to ttyUSB1 06:30:40 kernel: option 1-1:1.2: GSM modem (1-port) converter detected 06:30:40 kernel: usb 1-1: GSM modem (1-port) converter now attached to ttyUSB2 06:30:40 kernel: option 1-1:1.3: GSM modem (1-port) converter detected 06:30:40 kernel: usb 1-1: GSM modem (1-port) converter now attached to ttyUSB3 06:30:40 kernel: qmi_wwan 1-1:1.4: cdc-wdm0: USB WDM device 06:30:40 kernel: qmi_wwan 1-1:1.4 wwan0: register 'qmi_wwan' at usb-1c1b000.usb-1, WWAN/QMI device, XX:XX:XX:XX:XX:XX

Thanks a lot for advices