@KNERD
Thank you again - I got it alive! Something seems misaligned in the image so it can't find Linux kernel, but I can proceed.
Used `rkbin/tools/upgrade_tool uf update-soedge-factory-test-2021-03-23.img` with board's USB connected to my Linux PC by USB 3.0 A <--> USB 3.0 A cable.
EMMC was connected to SOEdge and uSD card was not inserted.
After that got following 9 partitions on EMMC.
jsanchez has 6/7 but it is more or less ok taking into account I used different flashing method.
# parted /dev/sdb unit MB print
Model: Generic STORAGE DEVICE (scsi)
Disk /dev/sdb: 7818MB
Sector size (logical/physical): 512B/512B
Partition Table: gpt
Disk Flags:
Number Start End Size File system Name Flags
1 8.39MB 12.6MB 4.19MB uboot
2 12.6MB 16.8MB 4.19MB trust
3 16.8MB 21.0MB 4.19MB misc
4 21.0MB 54.5MB 33.6MB boot
5 54.5MB 88.1MB 33.6MB recovery
6 88.1MB 122MB 33.6MB backup
7 122MB 189MB 67.1MB ext2 oem
8 189MB 1262MB 1074MB ext4 rootfs
9 1262MB 7818MB 6556MB ext2 userdata
Thank you again - I got it alive! Something seems misaligned in the image so it can't find Linux kernel, but I can proceed.
Used `rkbin/tools/upgrade_tool uf update-soedge-factory-test-2021-03-23.img` with board's USB connected to my Linux PC by USB 3.0 A <--> USB 3.0 A cable.
EMMC was connected to SOEdge and uSD card was not inserted.
After that got following 9 partitions on EMMC.
jsanchez has 6/7 but it is more or less ok taking into account I used different flashing method.
# parted /dev/sdb unit MB print
Model: Generic STORAGE DEVICE (scsi)
Disk /dev/sdb: 7818MB
Sector size (logical/physical): 512B/512B
Partition Table: gpt
Disk Flags:
Number Start End Size File system Name Flags
1 8.39MB 12.6MB 4.19MB uboot
2 12.6MB 16.8MB 4.19MB trust
3 16.8MB 21.0MB 4.19MB misc
4 21.0MB 54.5MB 33.6MB boot
5 54.5MB 88.1MB 33.6MB recovery
6 88.1MB 122MB 33.6MB backup
7 122MB 189MB 67.1MB ext2 oem
8 189MB 1262MB 1074MB ext4 rootfs
9 1262MB 7818MB 6556MB ext2 userdata