DDR Version V1.03 20190524 DDR4 933MHz BW=32 Col=10 Bk=4 BG=2 CS0 Row=16 CS=1 Die BW=16 Size=2048MB out Boot1 Release Time: May 21 2019 19:58:13, version: 1.03 ChipType = 0x14, 163 sfc_ver 3 sfc nor id: ff ff ff sfc_nand_init sfc_ver 3 sfc_nand id: ff ff ff NeedKHz=200KHz,clock=12000KHz NeedKHz=200KHz,clock=12000KHz NeedKHz=200KHz,clock=12000KHz NeedKHz=18000KHz,clock=192000KHz NeedKHz=48000KHz,clock=192000KHz mmc2:cmd19,100 SdmmcInit=2 0 BootCapSize=2000 UserCapSize=7456MB FwPartOffset=2000 , 2000 SdmmcInit=0 NOT PRESENT StorageInit ok = 11473 SecureMode = 0 Secure read PBA: 0x4 Secure read PBA: 0x404 Secure read PBA: 0x804 Secure read PBA: 0xc04 Secure read PBA: 0x1004 SecureInit ret = 0, SecureMode = 0 atags_set_bootdev: ret:(0) GPT part: 0, name: uboot, start:0x4000, size:0x2000 GPT part: 1, name: trust, start:0x6000, size:0x2000 GPT part: 2, name: misc, start:0x8000, size:0x2000 GPT part: 3, name: boot, start:0xa000, size:0x10000 GPT part: 4, name: recovery, start:0x1a000, size:0x10000 GPT part: 5, name: backup, start:0x2a000, size:0x10000 GPT part: 6, name: oem, start:0x3a000, size:0x20000 GPT part: 7, name: rootfs, start:0x5a000, size:0x200000 GPT part: 8, name: userdata, start:0x25a000, size:0xc35fdf find part:uboot OK. first_lba:0x4000. find part:trust OK. first_lba:0x6000. LoadTrust Addr:0x6000 No find bl30.bin No find bl32.bin Load uboot, ReadLba = 4000 Load OK, addr=0x600000, size=0xbbbd0 RunBL31 0x10000 INFO: Preloader serial: 2 NOTICE: BL31: v1.3(debug):fe4778e NOTICE: BL31: Built : 15:38:09, Jul 5 2019 ERROR: over or zero region, nr=-1, max=10 NOTICE: BL31: Rockchip release version: v1.0 INFO: GICv3 with legacy support detected. ARM GICV3 driver initialized in EL3 INFO: not boot from ram INFO: Using opteed sec cpu_context! INFO: boot cpu mask: 0 INFO: plat_rockchip_pmu_init(1673): pd status 8002 INFO: BL31: Initializing runtime services WARNING: No OPTEE provided by BL2 boot loader, Booting device without OPTEE initialization. SMC`s destined for OPTEE will return SMC_UNK ERROR: Error initializing runtime service opteed_fast INFO: BL31: Preparing for EL3 exit to normal world INFO: Entry point address = 0x600000 INFO: SPSR = 0x3c9 U-Boot 2017.09-03373-gaf4fa70 (Mar 01 2021 - 13:40:59 +0100) Model: Rockchip RK1808 EVB PreSerial: 2 DRAM: 2 GiB Sysmem: init Relocation Offset is: 7d807000 Using default environment dwmmc@ffcf0000: 1, dwmmc@ffd00000: 0 Bootdev(atags): mmc 0 MMC0: High Speed, 52Mhz PartType: EFI boot mode: recovery Load FDT from recovery part DTB: rk-kernel.dtb I2c speed: 400000Hz tcs4525@1c init 880000 uV PMIC: RK8090 (on=0x10, off=0x00) vdd_log 800000 uV vdd_cpu 800000 uV Can't get crtc id, default set to id = 0 Model: Rockchip RK1808 EVB V10 Board enter Recovery mode! failed to display uboot logo CLK: (sync kernel. arm: enter 1200000 KHz, init 1200000 KHz, kernel 0N/A) apll 1200000 KHz dpll 462000 KHz cpll 1000000 KHz gpll 1188000 KHz npll 24000 KHz ppll 100000 KHz hsclk_bus 297000 KHz msclk_bus 198000 KHz lsclk_bus 99000 KHz msclk_peri 198000 KHz lsclk_peri 99000 KHz Net: Error: ethernet@ffdd0000 address not set. No ethernet found. Hit key to stop autoboot('CTRL+C'): 0 Could not read from misc partition WARNING: Unable to load the BCB. boot mode: recovery ANDROID: reboot reason: "recovery" Android image load failed Android boot failed, error -1. boot mode: recovery do_boot_rockchip boot from Recovery partition! =Booting Rockchip format image= boot_rockchip_image kernel or boot part info error Card did not respond to voltage select! mmc_init: -95, time 10 switch to partitions #0, OK mmc0(part 0) is current device ** fs_devread read error - block Failed to mount ext2 filesystem... ** Unrecognized filesystem type ** ## Error: "rknand_boot" not defined starting USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... 1 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found Device 0: unknown device No ethernet found. missing environment variable: pxeuuid missing environment variable: bootfile Retrieving file: pxelinux.cfg/00000000 No ethernet found. missing environment variable: bootfile Retrieving file: pxelinux.cfg/0000000 No ethernet found. missing environment variable: bootfile Retrieving file: pxelinux.cfg/000000 No ethernet found. missing environment variable: bootfile Retrieving file: pxelinux.cfg/00000 No ethernet found. missing environment variable: bootfile Retrieving file: pxelinux.cfg/0000 No ethernet found. missing environment variable: bootfile Retrieving file: pxelinux.cfg/000 No ethernet found. missing environment variable: bootfile Retrieving file: pxelinux.cfg/00 No ethernet found. missing environment variable: bootfile Retrieving file: pxelinux.cfg/0 No ethernet found. missing environment variable: bootfile Retrieving file: pxelinux.cfg/default-arm-rockchip No ethernet found. missing environment variable: bootfile Retrieving file: pxelinux.cfg/default-arm No ethernet found. missing environment variable: bootfile Retrieving file: pxelinux.cfg/default No ethernet found. Config file not found No ethernet found. =>