Pinephone is dead (sort of)
12-30-2021, 11:42 AM
It looks like the same issue, all I'm seeing in your log is the initial detection when you plug in the cable from the phone. (Line 11 in your listing. The other entries are unrelated.) However the USB device descriptor is not read in and no further action is taken. You can see in my last log file example what you should be seeing if all is working OK. In fact in mine you can also see the network part of Jumpdrive being set up in addition to the eMMC.
If your Pinephone is able to boot up on Jumpdrive it's not totally bricked. Have you tried flashing your SD card with the Pinephone factory test image to run diagnostics?
https://wiki.pine64.org/wiki/PinePhone_S...ry_Test_OS
If you flash your SD card with a full operating system (Mobian, etc.) does the phone boot up on that and work? (Maybe your eMMC is dead but the rest of the phone is working?)
If your Pinephone is able to boot up on Jumpdrive it's not totally bricked. Have you tried flashing your SD card with the Pinephone factory test image to run diagnostics?
https://wiki.pine64.org/wiki/PinePhone_S...ry_Test_OS
If you flash your SD card with a full operating system (Mobian, etc.) does the phone boot up on that and work? (Maybe your eMMC is dead but the rest of the phone is working?)
