debian+phosh running on PinePhone
New release time, version 20200322 is available Smile

This one comes with a bunch of small but useful improvements:
- upgrade phosh to latest version
- ambient light and proximity sensor now works and is used by phosh to set the display's brightness and disable touch/display when relevant
- hacked geary's account dialog in order to make it usable on the PP
- headset microphone is now supported
- added a "headset" button to Calls in order to switch between headset and earpiece+internal mic

There is a small issue with the Speaker/Headset buttons in Calls: the state of the audio routing is normally the same used for the previous call, but this isn't reflected in the UI
For example, if you make a call using the headset, the next one will use the headset too, but the "Headset" button will show as if it was disabled. In order to revert to internal earpiece+mic, you'll have to press it twice (force headset routing then revert to internal routing).

Also, the Geary account dialog might take a few seconds to react when selecting the mail provider, please be patient and don't frenetically select your provider again and again Wink

(03-21-2020, 02:30 PM)buffer Wrote: Checking alsamixer again (press F6 - select 1- Pinephone sound card), I see that when I change mic profile from Default to Phone, or from Phone to Default, in phosh sound settings, both Mic1 and Mic2 are muted. However (press F6 again - select 0- Default) on the main menu the capture device remains unmuted. However, unmuting the mics does not help make sound get recorded.
Well, I think I understand your issue, and really, when saying "out of the box", I mean "out of the box": you shouldn't need to fiddle with alsamixer or other more or less hidden settings, all the necessary configuration is already built-in.
In order to check whether it's a hardware issue with your phone's mic, flash the latest image to an SD card and boot it, then plug a headset in, and make a call. Touch the "Headset" button, and try talking into the headset's mic; if it works this way, then your phone's internal mic is probably dead, sorry...

bcnaz Wrote:Wanted to add : I am pretty much just a GUI driver, so I would like to find ways to contribute , you guys are putting some excellent efforts into this project.

Contributing with no technical skills is a bit difficult for now as a lot still needs to happen under the hood, but you can help by keeping the wiki section up-to-date or improving it, answering to others on this forum, and so on...

Regarding donations: I never considered that aspect for this project, but for those really wanting to donate, I have an old Liberapay account I never really used so far...

Thank you all for your support, bug reports and kind words, every one of those is highly  appreciated Smile

(03-22-2020, 05:38 AM)buskmann Wrote: Did a "sudo apt upgrade" for more or less one hour ago, and it stopped at 84%. Last thing it put out was: e2scrub_all.service is a disabled or a static unit not running, not starting it.
Hmmm, I had a similar issue, could you share the full apt log so I can double-check with mine?
(03-22-2020, 06:06 AM)a-wai Wrote:
(03-22-2020, 05:38 AM)buskmann Wrote: Did a "sudo apt upgrade" for more or less one hour ago, and it stopped at 84%. Last thing it put out was: e2scrub_all.service is a disabled or a static unit not running, not starting it.
Hmmm, I had a similar issue, could you share the full apt log so I can double-check with mine?

Dont know if this works, but i Attached the logfile to this post.. Its a bit to big to post here Undecided

Just in case, heres the last part:

(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 69240 files and directories currently installed.)
Preparing to unpack .../00-libasan5_9.3.0-6_arm64.deb ...
Unpacking libasan5:arm64 (9.3.0-6) over (9.3.0-5) ...
Preparing to unpack .../01-g++-9_9.3.0-6_arm64.deb ...
Unpacking g++-9 (9.3.0-6) over (9.3.0-5) ...
Preparing to unpack .../02-gcc-9_9.3.0-6_arm64.deb ...
Unpacking gcc-9 (9.3.0-6) over (9.3.0-5) ...
Preparing to unpack .../03-libstdc++-9-dev_9.3.0-6_arm64.deb ...
Unpacking libstdc++-9-dev:arm64 (9.3.0-6) over (9.3.0-5) ...
Preparing to unpack .../04-libgcc-9-dev_9.3.0-6_arm64.deb ...
Unpacking libgcc-9-dev:arm64 (9.3.0-6) over (9.3.0-5) ...
Preparing to unpack .../05-cpp-9_9.3.0-6_arm64.deb ...
Unpacking cpp-9 (9.3.0-6) over (9.3.0-5) ...
Preparing to unpack .../06-gcc-9-base_9.3.0-6_arm64.deb ...
Unpacking gcc-9-base:arm64 (9.3.0-6) over (9.3.0-5) ...
Preparing to unpack .../07-libibus-1.0-5_1.5.22-2_arm64.deb ...
Unpacking libibus-1.0-5:arm64 (1.5.22-2) over (1.5.22-1) ...
Preparing to unpack .../08-gir1.2-ibus-1.0_1.5.22-2_arm64.deb ...
Unpacking gir1.2-ibus-1.0:arm64 (1.5.22-2) over (1.5.22-1) ...
Preparing to unpack .../09-gnome-session-bin_3.36.0-2_arm64.deb ...
Unpacking gnome-session-bin (3.36.0-2) over (3.36.0-1) ...
Preparing to unpack .../10-gnome-session_3.36.0-2_all.deb ...
Unpacking gnome-session (3.36.0-2) over (3.36.0-1) ...
Preparing to unpack .../11-gnome-session-common_3.36.0-2_all.deb ...
Unpacking gnome-session-common (3.36.0-2) over (3.36.0-1) ...
Preparing to unpack .../12-libcom-err2_1.45.6-1_arm64.deb ...
Unpacking libcom-err2:arm64 (1.45.6-1) over (1.45.5-2) ...
Preparing to unpack .../13-libgtk3-perl_0.037-1_all.deb ...
Unpacking libgtk3-perl (0.037-1) over (0.036-2) ...
Preparing to unpack .../14-libss2_1.45.6-1_arm64.deb ...
Unpacking libss2:arm64 (1.45.6-1) over (1.45.5-2) ...
Preparing to unpack .../15-pci.ids_0.0~2020.03.20-1_all.deb ...
Unpacking pci.ids (0.0~2020.03.20-1) over (0.0~2020.02.22-1) ...
Preparing to unpack .../16-sudo_1.8.31p1-1_arm64.deb ...
Unpacking sudo (1.8.31p1-1) over (1.8.31-1) ...
Preparing to unpack .../17-pinephone-modem-scripts_0.4_arm64.deb ...
Unpacking pinephone-modem-scripts (0.4) over (0.3) ...
Preparing to unpack .../18-pinephone-base_0.2.4_arm64.deb ...
Unpacking pinephone-base (0.2.4) over (0.2.3) ...
Preparing to unpack .../19-pinephone-multimedia_0.2.4_arm64.deb ...
Unpacking pinephone-multimedia (0.2.4) over (0.2.3) ...
Preparing to unpack .../20-pinephone-tweaks_0.4_arm64.deb ...
Unpacking pinephone-tweaks (0.4) over (0.3) ...
Setting up pci.ids (0.0~2020.03.20-1) ...
Setting up pinephone-multimedia (0.2.4) ...
Setting up libibus-1.0-5:arm64 (1.5.22-2) ...
Setting up gnome-session-bin (3.36.0-2) ...
Setting up libcom-err2:arm64 (1.45.6-1) ...
Setting up libgomp1:arm64 (10-20200321-1) ...
Setting up pinephone-modem-scripts (0.4) ...
Setting up libatomic1:arm64 (10-20200321-1) ...
Setting up libss2:arm64 (1.45.6-1) ...
Setting up sudo (1.8.31p1-1) ...
Setting up logsave (1.45.6-1) ...
Setting up libubsan1:arm64 (10-20200321-1) ...
Setting up gnome-session-common (3.36.0-2) ...
Setting up gir1.2-ibus-1.0:arm64 (1.5.22-2) ...
Setting up libcc1-0:arm64 (10-20200321-1) ...
Setting up liblsan0:arm64 (10-20200321-1) ...
Setting up libgtk3-perl (0.037-1) ...
Setting up libitm1:arm64 (10-20200321-1) ...
Setting up libpython3-stdlib:arm64 (3.8.2-2) ...
Setting up gcc-9-base:arm64 (9.3.0-6) ...
Setting up libtsan0:arm64 (10-20200321-1) ...
Setting up pinephone-tweaks (0.4) ...
Creating boot script...
Image Name:   pinephone
Created:      Sun Mar 22 10:57:41 2020
Image Type:   AArch64 Linux Script (uncompressed)
Data Size:    811 Bytes = 0.79 KiB = 0.00 MiB
Load Address: 00000000
Entry Point:  00000000
Contents:
   Image 0: 803 Bytes = 0.78 KiB = 0.00 MiB
Setting up e2fsprogs (1.45.6-1) ...
Installing new version of config file /etc/mke2fs.conf ...
update-initramfs: deferring update (trigger activated)
e2scrub_all.service is a disabled or a static unit not running, not starting it.


Attached Files
.log   logapt.log (Size: 328.06 KB / Downloads: 300)
Hmmm, nothing really stands out as to why it crashed... Did you try "sudo dpkg --configure -a" after rebooting ?
Did it now.
Heres the output:

Setting up python3 (3.8.2-2) ...
running python rtupdate hooks for python3.8...
running python post-rtupdate hooks for python3.8...
Setting up libasan5:arm64 (9.3.0-6) ...
Setting up pinephone-base (0.2.4) ...
Setting up cpp-9 (9.3.0-6) ...
Setting up libgcc-9-dev:arm64 (9.3.0-6) ...
Setting up gcc-9 (9.3.0-6) ...
Setting up libstdc++-9-dev:arm64 (9.3.0-6) ...
Setting up g++-9 (9.3.0-6) ...
Processing triggers for desktop-file-utils (0.24-1) ...
Processing triggers for mime-support (3.64) ...
Processing triggers for initramfs-tools (0.136) ...
update-initramfs: Generating /boot/initrd.img-5.5-pinephone
Processing triggers for libglib2.0-0:arm64 (2.64.1-1) ...
Processing triggers for libc-bin (2.30-2) ...
Processing triggers for systemd (245.2-1+pinephone1) ...
Processing triggers for man-db (2.9.1-1) ...
Setting up gnome-session (3.36.0-2) ...

I have just built my first image now, so gonna flash it today..
I gave the new image a try today. It looks good. I love being able to run Debian on my phone.

I didn't try the phone functions, but was listening to music with mplayer in the terminal, tried out a little browsing with Midori and Lynx, etc. The battery life seems relatively good too.
The Contact book and the texting work ok, but when I click on 'start chat' there are double entries of every name in the contact book ?
The second one of each has the name but no phone number. The other has all the info entered.
Not a big deal, but thought I would mention it.
      LINUX = CHOICES
         **BCnAZ**
               Idea
   Donate to $upport
your favorite OS Team
I was trying to change the username, so i logged in via ssh as root, and did:

pkill -9 -u `id -u debian`
usermod -l buskmann debian
usermod -m -d /home/buskmann buskmann

Now the phone wont log in and start phosh.
I assume that some auto login file that has the username "debian" in it or something.
If so, what file should i edit to get my username in there?
And is it maybe possible to use "uid" instead of username?
(03-22-2020, 08:34 PM)buskmann Wrote: I was trying to change the username, so i logged in via ssh as root, and did:

pkill -9 -u `id -u debian`
usermod -l buskmann debian
usermod -m -d /home/buskmann buskmann

Now the phone wont log in and start phosh.
I  assume that some auto login file that has the username "debian" in it or something.
If so, what file should i edit to get my username in there?
And is it maybe possible to use "uid" instead of username?

Please have a look :
https://forum.pine64.org/showthread.php?...5#pid62245
Thank you for directing me. I havent read threw all the pages of this forum, but now i read everything.

So I installed gdm3, and setup auto login, and now it works. Smile But the weird thing is that before i setup auto login, i had to login with the user "debian" whitch does not exist..

But i think im going to reflash and keep the user to "debian".
Im writing my own little afterinstall script to make the changes i want on it, like pwfeedback is sudo, growpart and keyboard layout.
But the part with changing the user seems like its not worth it.

Im learning a lot from this now, and its really fun. I live in Spain, where we have nationwide quarantine, so i have to have something like this to occupy me, or else i would go crazy..
Ok,
This message for @a-wai
I think it works Smile

Send from my 5mn hotspot

//Edit a 10mn
But PP charging. Gonna unplug in one minute.

//Edit
Unplugging

//Edit
Ok 
Still on battery..

//Edit
Just cut the hotspot


Possibly Related Threads…
Thread Author Replies Views Last Post
  bookworm vs trixie discussion for mobian in pinephone regular. zetabeta 66 24,319 42 minutes ago
Last Post: demetemre
  cryptocurrency on mobian/pinephone biketool 33 50,732 06-30-2025, 02:57 PM
Last Post: biketool
  Axolotl on PinePhone / Mobian arno_nuehm 223 246,736 06-25-2025, 01:19 PM
Last Post: anonymous
  Mobian Pinephone Notification LED biketool 2 414 06-07-2025, 03:19 PM
Last Post: KC9UDX
  Pinephone seems tobe using 4G data instead of Wifi data grump_fiddle_reinstall 7 2,927 02-20-2025, 02:47 PM
Last Post: puffchumpy
  mobian phosh on screen keyboard not popping up for Chromium/Electron apps grump_fiddle_reinstall 1 934 01-15-2025, 08:08 PM
Last Post: Kevin Kofler
  How to use QR codes on Mobian Sid(unstable) Pinephone Pro biketool 1 807 01-02-2025, 12:47 PM
Last Post: zetabeta
  atinout binaries for mobian/debian? NeutralGrey 4 2,905 10-31-2024, 04:16 AM
Last Post: astylethargic
  unofficial kali linux for pinephone help needed pinesmell 5 6,556 01-08-2024, 02:50 PM
Last Post: ERPlegend
  Auto start application on Phosh login Zebulon Walton 8 7,459 10-14-2023, 06:29 AM
Last Post: alaraajavamma

Forum Jump:


Users browsing this thread: 2 Guest(s)