Code:
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.4.83 (demetris@Server01) (gcc version 6.3.1 20170404 (Linaro GCC 6.3-2017.05) ) #1 SMP Fri Sep 29 10:33:18 CDT 2017
[ 0.000000] Boot CPU: AArch64 Processor [410fd034]
[ 0.000000] On node 0 totalpages: 1043968
[ 0.000000] DMA zone: 16312 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 1043968 pages, LIFO batch:31
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.0 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000] PERCPU: Embedded 21 pages/cpu @ffffffc0fef38000 s45864 r8192 d31960 u86016
[ 0.000000] pcpu-alloc: s45864 r8192 d31960 u86016 alloc=21*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: enabling workaround for ARM erratum 845719
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1027656
[ 0.000000] Kernel command line: root=/dev/ram0 rdinit=/init BOOT_IMAGE=/Image usbcore.autosuspend=-1 earlyprintk console=ttyFIQ0 console=tty0 boot=UUID=2909-2628 disk=UUID=11c779c3-8cfd-4e31-943e-58321082a130 textmode ssh
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.000000] software IO TLB [mem 0xf6400000-0xfa400000] (64MB) mapped at [ffffffc0f6400000-ffffffc0fa3fffff]
[ 0.000000] Memory: 4020164K/4175872K available (8894K kernel code, 1296K rwdata, 3416K rodata, 2880K init, 648K bss, 155708K reserved, 0K cma-reserved)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB)
[ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbdbfff0000 ( 246 GB)
[ 0.000000] .init : 0xffffff8008c90000 - 0xffffff8008f60000 ( 2880 KB)
[ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008930000 ( 8896 KB)
[ 0.000000] .rodata : 0xffffff8008930000 - 0xffffff8008c90000 ( 3456 KB)
[ 0.000000] .data : 0xffffff8008f60000 - 0xffffff80090a4008 ( 1297 KB)
[ 0.000000] vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000 ( 8 GB maximum)
[ 0.000000] 0xffffffbdc0008000 - 0xffffffbdc3fc0000 ( 63 MB actual)
[ 0.000000] fixed : 0xffffffbffe7fd000 - 0xffffffbffec00000 ( 4108 KB)
[ 0.000000] PCI I/O : 0xffffffbffee00000 - 0xffffffbfffe00000 ( 16 MB)
[ 0.000000] memory : 0xffffffc000200000 - 0xffffffc0ff000000 ( 4078 MB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] NR_IRQS:64 nr_irqs:64 0
[ 0.000000] GIC: Using split EOI/Deactivate mode
[ 0.000000] Architected cp15 timer(s) running at 24.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[ 0.000006] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[ 0.000832] Console: colour dummy device 80x25
[ 0.002166] console [tty0] enabled
[ 0.002214] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=80000)
[ 0.002284] pid_max: default: 32768 minimum: 301
[ 0.002472] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.002519] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.003499] Initializing cgroup subsys io
[ 0.003549] Initializing cgroup subsys memory
[ 0.003611] Initializing cgroup subsys devices
[ 0.003655] Initializing cgroup subsys freezer
[ 0.003697] Initializing cgroup subsys pids
[ 0.003755] ftrace: allocating 34156 entries in 134 pages
[ 0.092162] sched-energy: CPU device node has no sched-energy-costs
[ 0.092216] Invalid sched_group_energy for CPU0
[ 0.092250] CPU0: update cpu_capacity 1024
[ 0.092340] ASID allocator initialised with 65536 entries
[ 0.097199] Detected VIPT I-cache on CPU1
[ 0.097258] Invalid sched_group_energy for CPU1
[ 0.097264] CPU1: update cpu_capacity 1024
[ 0.097269] CPU1: Booted secondary processor [410fd034]
[ 0.097925] Detected VIPT I-cache on CPU2
[ 0.097972] Invalid sched_group_energy for CPU2
[ 0.097978] CPU2: update cpu_capacity 1024
[ 0.097983] CPU2: Booted secondary processor [410fd034]
[ 0.098667] Detected VIPT I-cache on CPU3
[ 0.098711] Invalid sched_group_energy for CPU3
[ 0.098716] CPU3: update cpu_capacity 1024
[ 0.098721] CPU3: Booted secondary processor [410fd034]
[ 0.098822] Brought up 4 CPUs
[ 0.099197] SMP: Total of 4 processors activated.
[ 0.099239] CPU: All CPU(s) started at EL2
[ 0.099303] alternatives: patching kernel code
[ 0.099537] Invalid sched_group_energy for CPU3
[ 0.099574] Invalid sched_group_energy for Cluster3
[ 0.099608] Invalid sched_group_energy for CPU2
[ 0.099642] Invalid sched_group_energy for Cluster2
[ 0.099676] Invalid sched_group_energy for CPU1
[ 0.099710] Invalid sched_group_energy for Cluster1
[ 0.099743] Invalid sched_group_energy for CPU0
[ 0.099777] Invalid sched_group_energy for Cluster0
[ 0.100531] devtmpfs: initialized
[ 0.116323] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[ 0.116415] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.116993] pinctrl core: initialized pinctrl subsystem
[ 0.117377] regulator-dummy: no parameters
[ 0.118261] NET: Registered protocol family 16
[ 0.132123] cpuidle: using governor ladder
[ 0.145482] cpuidle: using governor menu
[ 0.145536] Registered FIQ tty driver
[ 0.146038] vdso: 2 pages (1 code @ ffffff8008936000, 1 data @ ffffff8008f64000)
[ 0.146131] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.146315] DMA: preallocated 256 KiB pool for atomic allocations
[ 0.159508] gpiochip_add: registered GPIOs 1000 to 1031 on device: gpio0
[ 0.159648] gpiochip_add: registered GPIOs 1032 to 1063 on device: gpio1
[ 0.159775] gpiochip_add: registered GPIOs 1064 to 1095 on device: gpio2
[ 0.159910] gpiochip_add: registered GPIOs 1096 to 1127 on device: gpio3
[ 0.169031] genirq: Setting trigger mode 8 for irq 176 failed (gic_set_type+0x0/0x64)
[ 0.219554] console [ttyFIQ0] enabled
[ 0.220215] Registered fiq debugger ttyFIQ0
[ 0.234193] mpp venc_srv: mpp_probe enter
[ 0.234651] mpp venc_srv: init success
[ 0.235647] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/vcc-phy-regulator[0]'
[ 0.235683] vcc_phy: no parameters
[ 0.235916] reg-fixed-voltage vcc-phy-regulator: vcc_phy supplying 0uV
[ 0.236184] of_get_named_gpiod_flags: parsed 'gpio' property of node '/sdmmc-regulator[0]' - status (0)
[ 0.236249] reg-fixed-voltage sdmmc-regulator: Looking up vin-supply from device tree
[ 0.236271] vcc_sd: unable to resolve supply
[ 0.236286] vcc_sd: 3300 mV
[ 0.236505] reg-fixed-voltage sdmmc-regulator: Looking up vin-supply from device tree
[ 0.236526] vcc_sd: unable to resolve supply
[ 0.236544] reg-fixed-voltage sdmmc-regulator: vcc_sd supplying 3300000uV
[ 0.236627] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/vcc-sys[0]'
[ 0.236655] vcc_sys: 5000 mV
[ 0.236856] reg-fixed-voltage sdmmc-regulator: Looking up vin-supply from device tree
[ 0.236877] vcc_sd: unable to resolve supply
[ 0.236895] reg-fixed-voltage vcc-sys: vcc_sys supplying 5000000uV
[ 0.237488] iommu: Adding device ff350000.vpu-service to group 0
[ 0.238180] iommu: Adding device ff360000.rkvdec to group 1
[ 0.238773] iommu: Adding device ff330000.h265e to group 2
[ 0.239372] iommu: Adding device ff340000.vepu to group 3
[ 0.239956] iommu: Adding device ff370000.vop to group 4
[ 0.241574] rk_iommu ff330200.iommu: can't get aclk
[ 0.242055] rk_iommu ff330200.iommu: can't get hclk
[ 0.243508] SCSI subsystem initialized
[ 0.244169] usbcore: registered new interface driver usbfs
[ 0.244762] usbcore: registered new interface driver hub
[ 0.245394] usbcore: registered new device driver usb
[ 0.246064] Linux cec interface: v0.10
[ 0.246511] pps_core: LinuxPPS API ver. 1 registered
[ 0.246987] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.247865] PTP clock support registered
[ 0.249912] Advanced Linux Sound Architecture Driver Initialized.
[ 0.251263] Bluetooth: Core ver 2.21
[ 0.251652] NET: Registered protocol family 31
[ 0.252111] Bluetooth: HCI device and connection manager initialized
[ 0.252710] Bluetooth: HCI socket layer initialized
[ 0.253179] Bluetooth: L2CAP socket layer initialized
[ 0.253683] Bluetooth: SCO socket layer initialized
[ 0.254563] cfg80211: World regulatory domain updated:
[ 0.255050] cfg80211: DFS Master region: unset
[ 0.255471] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 0.256404] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 0.257161] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz, 92000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 0.258038] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 0.258793] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 0.259698] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 0.260588] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 0.261352] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 0.262105] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 0.263360] rockchip-cpuinfo cpuinfo: Serial : bbc99184ba566da9
[ 0.264822] clocksource: Switched to clocksource arch_sys_counter
[ 0.337887] FS-Cache: Loaded
[ 0.352060] NET: Registered protocol family 2
[ 0.353133] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.354287] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes)
[ 0.356449] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.357172] UDP hash table entries: 2048 (order: 5, 196608 bytes)
[ 0.357997] UDP-Lite hash table entries: 2048 (order: 5, 196608 bytes)
[ 0.359188] NET: Registered protocol family 1
[ 0.360076] RPC: Registered named UNIX socket transport module.
[ 0.360637] RPC: Registered udp transport module.
[ 0.361087] RPC: Registered tcp transport module.
[ 0.361580] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.362253] PCI: CLS 0 bytes, default 64
[ 0.495750] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
[ 0.514780] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.516530] FS-Cache: Netfs 'nfs' registered for caching
[ 0.517711] NFS: Registering the id_resolver key type
[ 0.518258] Key type id_resolver registered
[ 0.518664] Key type id_legacy registered
[ 0.519073] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 0.520027] FS-Cache: Netfs 'cifs' registered for caching
[ 0.527387] NET: Registered protocol family 38
[ 0.527866] Key type asymmetric registered
[ 0.528297] Asymmetric key parser 'x509' registered
[ 0.529060] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 0.529987] io scheduler noop registered
[ 0.530386] io scheduler deadline registered
[ 0.530848] io scheduler cfq registered (default)
[ 0.532638] phy phy-ff450000.syscon:usb2-phy@100.0: Looking up phy-supply from device tree
[ 0.532662] phy phy-ff450000.syscon:usb2-phy@100.0: Looking up phy-supply property in node /syscon@ff450000/usb2-phy@100/host-port failed
[ 0.533106] phy phy-ff450000.syscon:usb2-phy@100.1: Looking up phy-supply from device tree
[ 0.533127] phy phy-ff450000.syscon:usb2-phy@100.1: Looking up phy-supply property in node /syscon@ff450000/usb2-phy@100/otg-port failed
[ 0.533472] rockchip-usb2phy ff450000.syscon:usb2-phy@100: GPIO lookup for consumer otg-vbus
[ 0.533489] rockchip-usb2phy ff450000.syscon:usb2-phy@100: using device tree for GPIO lookup
[ 0.533528] of_get_named_gpiod_flags: parsed 'otg-vbus-gpios' property of node '/syscon@ff450000/usb2-phy@100[0]' - status (0)
[ 0.534224] rockchip-u3phy ff470000.usb3-phy: GPIO lookup for consumer vbus-drv
[ 0.534242] rockchip-u3phy ff470000.usb3-phy: using device tree for GPIO lookup
[ 0.534275] of_get_named_gpiod_flags: parsed 'vbus-drv-gpios' property of node '/usb3-phy@ff470000[0]' - status (0)
[ 0.534678] phy phy-ff470000.usb3-phy.2: Looking up phy-supply from device tree
[ 0.534698] phy phy-ff470000.usb3-phy.2: Looking up phy-supply property in node /usb3-phy@ff470000/utmi@ff470000 failed
[ 0.535133] phy phy-ff470000.usb3-phy.3: Looking up phy-supply from device tree
[ 0.535153] phy phy-ff470000.usb3-phy.3: Looking up phy-supply property in node /usb3-phy@ff470000/pipe@ff478000 failed
[ 0.537505] rockchip-u3phy ff470000.usb3-phy: Rockchip u3phy initialized successfully
[ 0.538755] phy phy-ff430000.hdmiphy.4: Looking up phy-supply from device tree
[ 0.538776] phy phy-ff430000.hdmiphy.4: Looking up phy-supply property in node /hdmiphy@ff430000 failed
[ 0.541518] rk-vcodec ff350000.vpu-service: probe device
[ 0.542063] rk-vcodec ff350000.vpu-service: vpu mmu dec ffffffc0f5dea010
[ 0.542965] rk-vcodec ff350000.vpu-service: allocator is drm
[ 0.543579] rk-vcodec ff350000.vpu-service: checking hw id 0
[ 0.544654] rk-vcodec ff350000.vpu-service: init success
[ 0.545997] rk-vcodec ff360000.rkvdec: probe device
[ 0.546504] rk-vcodec ff360000.rkvdec: vpu mmu dec ffffffc0f5dea810
[ 0.547357] rk-vcodec ff360000.rkvdec: allocator is drm
[ 0.547930] rk-vcodec ff360000.rkvdec: checking hw id 3410
[ 0.549023] rk-vcodec ff360000.rkvdec: init success
[ 0.549970] probe device ff330000.h265e
[ 0.550663] mpp_dev ff330000.h265e: try to get iommu dev ffffffc0f5deb010
[ 0.551738] mpp_dev ff330000.h265e: resource ready, register device
[ 0.552651] probe device ff340000.vepu
[ 0.553316] mpp_dev ff340000.vepu: try to get iommu dev ffffffc0f5deb810
[ 0.554238] rockchip_mpp_vepu_reset_init:143: No aclk reset resource define
[ 0.554926] rockchip_mpp_vepu_reset_init:148: No hclk reset resource define
[ 0.555576] mpp_dev ff340000.vepu: resource ready, register device
[ 0.559193] dma-pl330 ff1f0000.dmac: Loaded driver for PL330 DMAC-241330
[ 0.559833] dma-pl330 ff1f0000.dmac: DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
[ 0.561601] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.564705] [drm:drm_core_init] Initialized drm 1.1.0 20060810
[ 0.568449] rockchip-vop ff370000.vop: failed to get vop register byname
[ 0.569120] rockchip-vop ff370000.vop: invalid resource
[ 0.569621] rockchip-vop ff370000.vop: failed to get vop lut registers
[ 0.570234] rockchip-vop ff370000.vop: invalid resource
[ 0.570733] rockchip-vop ff370000.vop: failed to get vop cabc lut registers
[ 0.571651] rockchip-drm display-subsystem: bound ff370000.vop (ops 0xffffff80089bfb08)
[ 0.572770] i2c i2c-4: of_i2c: modalias failure on /hdmi@ff3c0000/ports
[ 0.573395] dwhdmi-rockchip ff3c0000.hdmi: registered DesignWare HDMI I2C bus driver
[ 0.574206] dwhdmi-rockchip ff3c0000.hdmi: Detected HDMI TX controller v2.11a with HDCP (inno_dw_hdmi_phy2)
[ 0.576154] rockchip-drm display-subsystem: bound ff3c0000.hdmi (ops 0xffffff80089ba418)
[ 0.576937] [drm:drm_vblank_init] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 0.577691] [drm:drm_vblank_init] No driver support for vblank timestamp query.
[ 0.578556] rockchip-drm display-subsystem: failed to parse display resources
[ 1.231606] Console: switching to colour frame buffer device 160x45
[ 1.254472] rockchip-drm display-subsystem: fb0: frame buffer device
[ 1.259237] Registered IR keymap rc-cec
[ 1.260318] input: RC for dw_hdmi as /devices/platform/ff3c0000.hdmi/rc/rc0/input0
[ 1.261287] rc0: RC for dw_hdmi as /devices/platform/ff3c0000.hdmi/rc/rc0
[ 1.262661] Unable to detect cache hierarchy from DT for CPU 0
[ 1.264580] brd: module loaded
[ 1.273524] loop: module loaded
[ 1.275028] zram: Added device: zram0
[ 1.275847] lkdtm: No crash points registered, enable through debugfs
[ 1.276893] Loading iSCSI transport class v2.0-870.
[ 1.277978] iscsi: registered transport (tcp)
[ 1.280018] rockchip-spi ff190000.spi: Failed to request TX DMA channel
[ 1.280879] rockchip-spi ff190000.spi: Failed to request RX DMA channel
[ 1.282647] m25p80 spi32766.0: gd25q128 (16384 Kbytes)
[ 1.283362] 6 ofpart partitions found on MTD device spi32766.0
[ 1.284098] Creating 6 MTD partitions on "spi32766.0":
[ 1.284756] 0x000000000000-0x000000008000 : "system"
[ 1.285914] 0x000000008000-0x000000400000 : "loader"
[ 1.286982] 0x000000400000-0x0000007c0000 : "reserved"
[ 1.288057] 0x0000007c0000-0x000000800000 : "vendor"
[ 1.297192] 0x000000800000-0x000000c00000 : "uboot"
[ 1.306211] 0x000000c00000-0x000001000000 : "atf"
[ 1.316664] rk_gmac-dwmac ff540000.ethernet: Looking up phy-supply from device tree
[ 1.316788] rk_gmac-dwmac ff540000.ethernet: clock input or output? (input).
[ 1.325494] rk_gmac-dwmac ff540000.ethernet: TX delay(0x26).
[ 1.333886] rk_gmac-dwmac ff540000.ethernet: RX delay(0x11).
[ 1.342114] rk_gmac-dwmac ff540000.ethernet: integrated PHY? (no).
[ 1.350567] rk_gmac-dwmac ff540000.ethernet: clock input from PHY
[ 1.363789] rk_gmac-dwmac ff540000.ethernet: init for RGMII
[ 1.371985] stmmac - user ID: 0x10, Synopsys ID: 0x35
[ 1.380069] Ring mode enabled
[ 1.387862] DMA HW capability register supported
[ 1.388460] Normal descriptors
[ 1.403380] RX Checksum Offload Engine supported (type 2)
[ 1.411206] TX Checksum insertion supported
[ 1.418765] Wake-Up On Lan supported
[ 1.426262] Enable RX Mitigation via HW Watchdog Timer
[ 1.433950] of_get_named_gpiod_flags: parsed 'snps,reset-gpio' property of node '/ethernet@ff540000[0]' - status (0)
[ 1.506985] libphy: stmmac: probed
[ 1.514193] eth%d: PHY ID 001cc916 at 0 IRQ POLL (stmmac-0:00) active
[ 1.521650] eth%d: PHY ID 001cc916 at 1 IRQ POLL (stmmac-0:01)
[ 1.530074] usbcore: registered new interface driver rndis_wlan
[ 1.537494] Rockchip WiFi SYS interface (V1.00) ...
[ 1.544636] usbcore: registered new interface driver rtl8150
[ 1.551698] usbcore: registered new interface driver r8152
[ 1.558564] usbcore: registered new interface driver asix
[ 1.565228] usbcore: registered new interface driver ax88179_178a
[ 1.571817] usbcore: registered new interface driver cdc_ether
[ 1.578262] usbcore: registered new interface driver rndis_host
[ 1.584562] usbcore: registered new interface driver cdc_ncm
[ 1.590614] usbcore: registered new interface driver cdc_mbim
[ 1.598327] phy phy-ff470000.usb3-phy.2: u3phy u2 power on
[ 1.604228] phy phy-ff470000.usb3-phy.3: u3phy u3 power on
[ 1.611002] dwc2 ff580000.usb: Looking up vusb_d-supply from device tree
[ 1.611024] dwc2 ff580000.usb: Looking up vusb_d-supply property in node /usb@ff580000 failed
[ 1.611042] ff580000.usb supply vusb_d not found, using dummy regulator
[ 1.617146] dwc2 ff580000.usb: Looking up vusb_a-supply from device tree
[ 1.617167] dwc2 ff580000.usb: Looking up vusb_a-supply property in node /usb@ff580000 failed
[ 1.617183] ff580000.usb supply vusb_a not found, using dummy regulator
[ 1.851734] dwc2 ff580000.usb: DWC OTG Controller
[ 1.857430] dwc2 ff580000.usb: new USB bus registered, assigned bus number 1
[ 1.863408] dwc2 ff580000.usb: irq 40, io mem 0x00000000
[ 1.869370] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.875408] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.881451] usb usb1: Product: DWC OTG Controller
[ 1.887196] usb usb1: Manufacturer: Linux 4.4.83 dwc2_hsotg
[ 1.893021] usb usb1: SerialNumber: ff580000.usb
[ 1.899561] hub 1-0:1.0: USB hub found
[ 1.905278] hub 1-0:1.0: 1 port detected
[ 1.912329] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.918553] ehci-pci: EHCI PCI platform driver
[ 1.924644] ehci-platform: EHCI generic platform driver
[ 1.933406] ehci-platform ff5c0000.usb: EHCI Host Controller
[ 1.939877] ehci-platform ff5c0000.usb: new USB bus registered, assigned bus number 2
[ 1.946502] ehci-platform ff5c0000.usb: irq 41, io mem 0xff5c0000
[ 1.961529] ehci-platform ff5c0000.usb: USB 2.0 started, EHCI 1.00
[ 1.968209] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.974786] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.981487] usb usb2: Product: EHCI Host Controller
[ 1.987909] usb usb2: Manufacturer: Linux 4.4.83 ehci_hcd
[ 1.994379] usb usb2: SerialNumber: ff5c0000.usb
[ 2.001600] hub 2-0:1.0: USB hub found
[ 2.007942] hub 2-0:1.0: 1 port detected
[ 2.014875] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.021467] ohci-platform: OHCI generic platform driver
[ 2.028469] ohci-platform ff5d0000.usb: Generic Platform OHCI controller
[ 2.035445] ohci-platform ff5d0000.usb: new USB bus registered, assigned bus number 3
[ 2.042394] ohci-platform ff5d0000.usb: irq 42, io mem 0xff5d0000
[ 2.105762] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.112597] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.119408] usb usb3: Product: Generic Platform OHCI controller
[ 2.126090] usb usb3: Manufacturer: Linux 4.4.83 ohci_hcd
[ 2.132684] usb usb3: SerialNumber: ff5d0000.usb
[ 2.140079] hub 3-0:1.0: USB hub found
[ 2.146739] hub 3-0:1.0: 1 port detected
[ 2.154515] xhci-hcd xhci-hcd.9.auto: xHCI Host Controller
[ 2.161823] xhci-hcd xhci-hcd.9.auto: new USB bus registered, assigned bus number 4
[ 2.169329] xhci-hcd xhci-hcd.9.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x00210010
[ 2.176933] xhci-hcd xhci-hcd.9.auto: irq 180, io mem 0xff600000
[ 2.184506] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.191977] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.199627] usb usb4: Product: xHCI Host Controller
[ 2.206993] usb usb4: Manufacturer: Linux 4.4.83 xhci-hcd
[ 2.207002] usb usb4: SerialNumber: xhci-hcd.9.auto
[ 2.207847] hub 4-0:1.0: USB hub found
[ 2.207894] hub 4-0:1.0: 1 port detected
[ 2.208412] xhci-hcd xhci-hcd.9.auto: xHCI Host Controller
[ 2.208682] xhci-hcd xhci-hcd.9.auto: new USB bus registered, assigned bus number 5
[ 2.208792] usb usb5: We don't know the algorithms for LPM for this host, disabling LPM.
[ 2.208970] usb usb5: New USB device found, idVendor=1d6b, idProduct=0003
[ 2.208981] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.208990] usb usb5: Product: xHCI Host Controller
[ 2.208998] usb usb5: Manufacturer: Linux 4.4.83 xhci-hcd
[ 2.209006] usb usb5: SerialNumber: xhci-hcd.9.auto
[ 2.209795] hub 5-0:1.0: USB hub found
[ 2.209838] hub 5-0:1.0: 1 port detected
[ 2.210534] usbcore: registered new interface driver cdc_acm
[ 2.210539] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 2.210611] usbcore: registered new interface driver cdc_wdm
[ 2.210689] usbcore: registered new interface driver uas
[ 2.210925] usbcore: registered new interface driver usb-storage
[ 2.211059] usbcore: registered new interface driver usbserial
[ 2.211113] usbcore: registered new interface driver usbserial_generic
[ 2.211155] usbserial: USB Serial support registered for generic
[ 2.211225] usbcore: registered new interface driver cp210x
[ 2.211272] usbserial: USB Serial support registered for cp210x
[ 2.211404] usbcore: registered new interface driver ftdi_sio
[ 2.211446] usbserial: USB Serial support registered for FTDI USB Serial Device
[ 2.211926] usbcore: registered new interface driver keyspan
[ 2.211973] usbserial: USB Serial support registered for Keyspan - (without firmware)
[ 2.212015] usbserial: USB Serial support registered for Keyspan 1 port adapter
[ 2.212056] usbserial: USB Serial support registered for Keyspan 2 port adapter
[ 2.212098] usbserial: USB Serial support registered for Keyspan 4 port adapter
[ 2.212190] usbcore: registered new interface driver option
[ 2.212238] usbserial: USB Serial support registered for GSM modem (1-port)
[ 2.212782] usbcore: registered new interface driver oti6858
[ 2.212824] usbserial: USB Serial support registered for oti6858
[ 2.212899] usbcore: registered new interface driver pl2303
[ 2.212942] usbserial: USB Serial support registered for pl2303
[ 2.213033] usbcore: registered new interface driver qcserial
[ 2.213081] usbserial: USB Serial support registered for Qualcomm USB modem
[ 2.213200] usbcore: registered new interface driver sierra
[ 2.213242] usbserial: USB Serial support registered for Sierra USB modem
[ 2.214475] usbcore: registered new interface driver iforce
[ 2.214588] usbcore: registered new interface driver xpad
[ 2.214840] usbcore: registered new interface driver usbtouchscreen
[ 2.215457] i2c /dev entries driver
[ 2.218100] rk808 1-0018: Pmic Chip id: 0x8050
[ 2.219191] rk808 1-0018: source: on=0x40, off=0x00
[ 2.223325] rk808 1-0018: Looking up vcc1-supply from device tree
[ 2.223442] DCDC_REG1: supplied by vcc_sys
[ 2.223455] vcc_sys: could not add device link regulator.4 err -2
[ 2.225331] vdd_logic: 712 <--> 1450 mV at 1150 mV
[ 2.225633] reg-fixed-voltage sdmmc-regulator: Looking up vin-supply from device tree
[ 2.225661] vcc_sd: unable to resolve supply
[ 2.225683] rk808 1-0018: Looking up vcc2-supply from device tree
[ 2.225764] DCDC_REG2: supplied by vcc_sys
[ 2.225775] vcc_sys: could not add device link regulator.5 err -2
[ 2.227131] vdd_arm: 712 <--> 1450 mV at 1000 mV
[ 2.227398] reg-fixed-voltage sdmmc-regulator: Looking up vin-supply from device tree
[ 2.227420] vcc_sd: unable to resolve supply
[ 2.227441] rk808 1-0018: Looking up vcc3-supply from device tree
[ 2.227504] DCDC_REG3: supplied by vcc_sys
[ 2.227514] vcc_sys: could not add device link regulator.6 err -2
[ 2.228730] vcc_ddr: at 5000 mV
[ 2.228953] reg-fixed-voltage sdmmc-regulator: Looking up vin-supply from device tree
[ 2.228973] vcc_sd: unable to resolve supply
[ 2.228995] rk808 1-0018: Looking up vcc4-supply from device tree
[ 2.229051] DCDC_REG4: supplied by vcc_sys
[ 2.229061] vcc_sys: could not add device link regulator.7 err -2
[ 2.229938] vcc_io: 3300 mV
[ 2.230230] reg-fixed-voltage sdmmc-regulator: Looking up vin-supply from device tree
[ 2.230252] vcc_sd: supplied by vcc_io
[ 2.230322] rk808 1-0018: Looking up vcc5-supply from device tree
[ 2.230339] LDO_REG1: supplied by vcc_io
[ 2.230349] vcc_io: could not add device link regulator.8 err -2
[ 2.232677] vcc_18: 1800 mV
[ 2.232938] rk808 1-0018: Looking up vcc5-supply from device tree
[ 2.232957] LDO_REG2: supplied by vcc_io
[ 2.232967] vcc_io: could not add device link regulator.9 err -2
[ 2.235298] vcc18_emmc: 1800 mV
[ 2.235594] rk808 1-0018: Looking up vcc6-supply from device tree
[ 2.235691] LDO_REG3: supplied by vcc_sys
[ 2.235702] vcc_sys: could not add device link regulator.10 err -2
[ 2.238038] vdd_10: 1000 mV
[ 2.238338] rk808 1-0018: register rk8050 regulators
[ 2.238550] gpiochip_find_base: cannot find free range
[ 2.238557] gpiochip_add: GPIOs -1..0 (rk8xx-gpio) failed to register
[ 2.238566] rk8xx-gpio rk8xx-gpio: register rk8xx gpiochip fail: -28
[ 2.238583] rk8xx-gpio: probe of rk8xx-gpio failed with error -28
[ 2.240650] input: rk8xx_pwrkey as /devices/platform/ff160000.i2c/i2c-1/1-0018/input/input1
[ 2.241138] rk808-rtc rk808-rtc: device is disabled
[ 2.241154] rk808-rtc: probe of rk808-rtc failed with error -22
[ 2.241218] rk3x-i2c ff160000.i2c: Initialized RK3xxx I2C bus at ffffff800956c000
[ 2.242963] lirc_dev: IR Remote Control driver registered, major 239
[ 2.242979] IR NEC protocol handler initialized
[ 2.242994] IR RC5(x/sz) protocol handler initialized
[ 2.243009] IR RC6 protocol handler initialized
[ 2.243023] IR JVC protocol handler initialized
[ 2.243037] IR Sony protocol handler initialized
[ 2.243051] IR SANYO protocol handler initialized
[ 2.243065] IR Sharp protocol handler initialized
[ 2.243079] IR MCE Keyboard/mouse protocol handler initialized
[ 2.243093] IR LIRC bridge handler initialized
[ 2.243107] IR XMP protocol handler initialized
[ 2.243516] of_get_named_gpiod_flags: parsed 'gpios' property of node '/ir-receiver[0]' - status (0)
[ 2.243577] Registered IR keymap rc-pine64
[ 2.243994] input: gpio_ir_recv as /devices/platform/ir-receiver/rc/rc1/input2
[ 2.244257] rc1: gpio_ir_recv as /devices/platform/ir-receiver/rc/rc1
[ 2.244713] input: MCE IR Keyboard/Mouse (gpio-rc-recv) as /devices/virtual/input/input3
[ 2.245184] rc rc1: lirc_dev: driver ir-lirc-codec (gpio-rc-recv) registered at minor = 0
[ 2.246207] rockchip-iodomain ff100000.syscon:io-domains: Looking up vccio1-supply from device tree
[ 2.246334] rockchip-iodomain ff100000.syscon:io-domains: Looking up vccio2-supply from device tree
[ 2.246921] rockchip-iodomain ff100000.syscon:io-domains: Looking up vccio3-supply from device tree
[ 2.247032] rockchip-iodomain ff100000.syscon:io-domains: Looking up vccio4-supply from device tree
[ 2.247589] rockchip-iodomain ff100000.syscon:io-domains: Looking up vccio5-supply from device tree
[ 2.247665] rockchip-iodomain ff100000.syscon:io-domains: Looking up vccio6-supply from device tree
[ 2.247736] rockchip-iodomain ff100000.syscon:io-domains: Looking up pmuio-supply from device tree
[ 2.249552] rockchip-thermal ff250000.tsadc: Missing tshut mode property, using default (cru)
[ 2.249564] rockchip-thermal ff250000.tsadc: Missing tshut-polarity property, using default (low)
[ 2.250425] Bluetooth: Virtual HCI driver ver 1.5
[ 2.250669] Bluetooth: HCI UART driver ver 2.3
[ 2.250676] Bluetooth: HCI UART protocol H4 registered
[ 2.250680] Bluetooth: HCI UART protocol Three-wire (H5) registered
[ 2.250791] usbcore: registered new interface driver bfusb
[ 2.250900] usbcore: registered new interface driver btusb
[ 2.250911] Bluetooth: Generic Bluetooth SDIO driver ver 0.1
[ 2.251374] cpu cpu0: leakage=12
[ 2.251413] cpu cpu0: Looking up cpu-supply from device tree
[ 2.252015] cpu cpu0: Looking up cpu-supply from device tree
[ 2.252228] cpu cpu0: Looking up cpu-supply from device tree
[ 2.254247] sdhci: Secure Digital Host Controller Interface driver
[ 2.254249] sdhci: Copyright(c) Pierre Ossman
[ 2.254253] Synopsys Designware Multimedia Card Interface Driver
[ 2.254937] dwmmc_rockchip ff500000.rksdmmc: IDMAC supports 32-bit address mode.
[ 2.254958] dwmmc_rockchip ff500000.rksdmmc: Using internal DMA controller.
[ 2.254968] dwmmc_rockchip ff500000.rksdmmc: Version ID is 270a
[ 2.255007] dwmmc_rockchip ff500000.rksdmmc: DW MMC controller at irq 37,32 bit host data width,256 deep fifo
[ 2.255028] dwmmc_rockchip ff500000.rksdmmc: Looking up vmmc-supply from device tree
[ 2.255120] dwmmc_rockchip ff500000.rksdmmc: Looking up vqmmc-supply from device tree
[ 2.255178] dwmmc_rockchip ff500000.rksdmmc: GPIO lookup for consumer cd
[ 2.255182] dwmmc_rockchip ff500000.rksdmmc: using device tree for GPIO lookup
[ 2.255198] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/rksdmmc@ff500000[0]' - status (0)
[ 2.255224] dwmmc_rockchip ff500000.rksdmmc: Got CD GPIO
[ 2.255229] dwmmc_rockchip ff500000.rksdmmc: GPIO lookup for consumer wp
[ 2.255233] dwmmc_rockchip ff500000.rksdmmc: using device tree for GPIO lookup
[ 2.255238] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/rksdmmc@ff500000[0]'
[ 2.255243] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/rksdmmc@ff500000[0]'
[ 2.255247] dwmmc_rockchip ff500000.rksdmmc: using lookup tables for GPIO lookup
[ 2.255251] dwmmc_rockchip ff500000.rksdmmc: lookup for GPIO wp failed
[ 2.268198] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[ 2.282717] dwmmc_rockchip ff500000.rksdmmc: 1 slots initialized
[ 2.285275] dwmmc_rockchip ff520000.rksdmmc: IDMAC supports 32-bit address mode.
[ 2.285306] dwmmc_rockchip ff520000.rksdmmc: Using internal DMA controller.
[ 2.285315] dwmmc_rockchip ff520000.rksdmmc: Version ID is 270a
[ 2.285359] dwmmc_rockchip ff520000.rksdmmc: DW MMC controller at irq 38,32 bit host data width,256 deep fifo
[ 2.285388] dwmmc_rockchip ff520000.rksdmmc: Looking up vmmc-supply from device tree
[ 2.285492] dwmmc_rockchip ff520000.rksdmmc: Looking up vqmmc-supply from device tree
[ 2.286021] dwmmc_rockchip ff520000.rksdmmc: GPIO lookup for consumer wp
[ 2.286026] dwmmc_rockchip ff520000.rksdmmc: using device tree for GPIO lookup
[ 2.286032] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/rksdmmc@ff520000[0]'
[ 2.286037] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/rksdmmc@ff520000[0]'
[ 2.286041] dwmmc_rockchip ff520000.rksdmmc: using lookup tables for GPIO lookup
[ 2.286046] dwmmc_rockchip ff520000.rksdmmc: lookup for GPIO wp failed
[ 2.288172] usb 1-1: new high-speed USB device number 2 using dwc2
[ 2.298200] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[ 2.310746] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0)
[ 2.310795] mmc0: new high speed SDHC card at address 59b4
[ 2.311308] mmcblk0: mmc0:59b4 EB2MW 29.8 GiB
[ 2.312636] dwmmc_rockchip ff520000.rksdmmc: 1 slots initialized
[ 2.312754] sdhci-pltfm: SDHCI platform and OF driver helper
[ 2.314015] mmcblk0: p1 p2
[ 2.315260] of_get_named_gpiod_flags: parsed 'gpios' property of node '/gpio-leds/standby-led[0]' - status (-517)
[ 2.315366] ledtrig-cpu: registered to indicate activity on CPUs
[ 2.315421] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.315743] usbcore: registered new interface driver usbhid
[ 2.315745] usbhid: USB HID core driver
[ 2.318481] rk3328-codec ff410000.codec: spk_depop_time use default value.
[ 2.321804] NET: Registered protocol family 10
[ 2.322576] NET: Registered protocol family 17
[ 2.322682] Bluetooth: RFCOMM socket layer initialized
[ 2.322711] Bluetooth: RFCOMM ver 1.11
[ 2.322725] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 2.322732] Bluetooth: HIDP socket layer initialized
[ 2.322931] [WLAN_RFKILL]: Enter rfkill_wlan_init
[ 2.323056] [BT_RFKILL]: Enter rfkill_rk_init
[ 2.323162] Key type dns_resolver registered
[ 2.324475] of_get_named_gpiod_flags: parsed 'gpios' property of node '/gpio-leds/standby-led[0]' - status (-517)
[ 2.324762] of_get_named_gpiod_flags: can't parse 'simple-audio-card,hp-det-gpio' property of node '/hdmi-sound[0]'
[ 2.324766] of_get_named_gpiod_flags: can't parse 'simple-audio-card,mic-det-gpio' property of node '/hdmi-sound[0]'
[ 2.325228] asoc-simple-card hdmi-sound: i2s-hifi <-> ff000000.i2s mapping ok
[ 2.326274] of_get_named_gpiod_flags: can't parse 'simple-audio-card,hp-det-gpio' property of node '/sound[0]'
[ 2.326279] of_get_named_gpiod_flags: can't parse 'simple-audio-card,mic-det-gpio' property of node '/sound[0]'
[ 2.328219] mmc_host mmc1: Bus speed (slot 0) = 300000Hz (slot req 300000Hz, actual 300000HZ div = 0)
[ 2.346804] asoc-simple-card sound: rk3328-hifi <-> ff010000.i2s mapping ok
[ 2.347246] asoc-simple-card sound: snd-soc-dummy-dai <-> ff010000.i2s mapping ok
[ 2.348440] of_get_named_gpiod_flags: can't parse 'simple-audio-card,hp-det-gpio' property of node '/spdif-sound[0]'
[ 2.348445] of_get_named_gpiod_flags: can't parse 'simple-audio-card,mic-det-gpio' property of node '/spdif-sound[0]'
[ 2.348861] asoc-simple-card spdif-sound: dit-hifi <-> ff030000.spdif mapping ok
[ 2.349593] of_get_named_gpiod_flags: parsed 'gpios' property of node '/gpio-leds/standby-led[0]' - status (-517)
[ 2.349896] hctosys: unable to open rtc device (rtc0)
[ 2.358273] mmc_host mmc1: Bus speed (slot 0) = 200000Hz (slot req 200000Hz, actual 200000HZ div = 0)
[ 2.368699] rockchip-pm-domain ff100000.syscon:power-controller: failed to get ack on domain 'pd_video', val=0x10040
[ 2.378723] rockchip-pm-domain ff100000.syscon:power-controller: failed to get ack on domain 'pd_vpu', val=0x10040
[ 2.380485] ALSA device list:
[ 2.380488] #0: HDMI
[ 2.380489] #1: I2S
[ 2.380491] #2: SPDIF
[ 2.398207] mmc_host mmc1: Bus speed (slot 0) = 100000Hz (slot req 100000Hz, actual 100000HZ div = 0)
[ 2.428918] vendor storage:20160801 ret = 0
[ 2.574823] usb 3-1: new full-speed USB device number 2 using ohci-platform
[ 2.752225] usb 1-1: New USB device found, idVendor=0bda, idProduct=8179
[ 2.752230] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.752234] usb 1-1: Product: 802.11n WLAN NIC
[ 2.752238] usb 1-1: Manufacturer: Realtek
[ 2.753386] of_get_named_gpiod_flags: parsed 'gpios' property of node '/gpio-leds/standby-led[0]' - status (-517)
[ 2.768560] usb 3-1: New USB device found, idVendor=046d, idProduct=c52b
[ 2.768565] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.768570] usb 3-1: Product: USB Receiver
[ 2.768574] usb 3-1: Manufacturer: Logitech
[ 2.777468] input: Logitech USB Receiver as /devices/platform/ff5d0000.usb/usb3/3-1/3-1:1.0/0003:046D:C52B.0001/input/input4
[ 2.804653] Freeing unused kernel memory: 2880K
[ 2.828849] hid-generic 0003:046D:C52B.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-ff5d0000.usb-1/input0
[ 2.835151] of_get_named_gpiod_flags: parsed 'gpios' property of node '/gpio-leds/standby-led[0]' - status (-517)
[ 2.840298] input: Logitech USB Receiver as /devices/platform/ff5d0000.usb/usb3/3-1/3-1:1.1/0003:046D:C52B.0002/input/input5
[ 2.891960] hid-generic 0003:046D:C52B.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-ff5d0000.usb-1/input1
[ 2.892292] of_get_named_gpiod_flags: parsed 'gpios' property of node '/gpio-leds/standby-led[0]' - status (-517)
[ 2.899871] hid-generic 0003:046D:C52B.0003: hiddev0,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-ff5d0000.usb-1/input2
[ 2.900175] of_get_named_gpiod_flags: parsed 'gpios' property of node '/gpio-leds/standby-led[0]' - status (-517)
[ 4.453861] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities
[ 4.455008] EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature incompatibilities
[ 4.646766] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[ 9.189279] random: nonblocking pool is initialized
[ 18.635639] systemd[1]: System time before build time, advancing clock.
[ 18.644764] systemd[1]: systemd 232 running in system mode. (-PAM -AUDIT -SELINUX -IMA -APPARMOR -SMACK -SYSVINIT -UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS -ACL -XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
[ 18.645248] systemd[1]: Detected architecture arm64.
[ 18.646758] systemd[1]: Set hostname to <Lakka>.
[ 18.705903] systemd[1]: Listening on Journal Socket.
[ 18.706520] systemd[1]: Listening on udev Kernel Socket.
[ 18.707971] systemd[1]: Created slice System Slice.
[ 18.710340] systemd[1]: Mounting Debug File System...
[ 18.712798] systemd[1]: Starting Samba Configuration...
[ 18.714033] systemd[1]: Created slice User and Session Slice.
[ 18.715423] systemd[1]: Listening on udev Control Socket.
[ 18.718881] systemd[1]: Starting Debug Shell on /dev/ttyFIQ0...
[ 18.722111] systemd[1]: Mounting POSIX Message Queue File System...
[ 18.722981] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 18.723760] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 18.724474] systemd[1]: Listening on Journal Socket (/dev/log).
[ 18.747005] systemd[1]: Starting Load Kernel Modules...
[ 18.749723] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 18.752621] systemd[1]: Starting Setup machine-id...
[ 18.753062] systemd[1]: Reached target Slices.
[ 18.753491] systemd[1]: Reached target Swap.
[ 18.756536] systemd[1]: Mounting Temporary Directory...
[ 18.764083] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 18.765114] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 18.767551] I : [File] : drivers/gpu/arm/mali400/mali/linux/mali_kernel_linux.c; [Line] : 414; [Func] : mali_module_init(); svn_rev_string_from_arm of this mali_ko is '-v2.1-rc3-1261-g870ffe9', rk_ko_ver is '5', built at '10:24:13', on 'Sep 29 2017'.
[ 18.767782] mali-utgard ff300000.gpu: mali_platform_device->num_resources = 9
[ 18.767797] mali-utgard ff300000.gpu: resource[0].start = 0x0x00000000ff300000
[ 18.767804] mali-utgard ff300000.gpu: resource[1].start = 0x0x00000000ff300000
[ 18.767811] mali-utgard ff300000.gpu: resource[2].start = 0x0x0000000000000011
[ 18.767819] mali-utgard ff300000.gpu: resource[3].start = 0x0x0000000000000012
[ 18.767826] mali-utgard ff300000.gpu: resource[4].start = 0x0x0000000000000013
[ 18.767833] mali-utgard ff300000.gpu: resource[5].start = 0x0x0000000000000014
[ 18.767840] mali-utgard ff300000.gpu: resource[6].start = 0x0x0000000000000015
[ 18.767847] mali-utgard ff300000.gpu: resource[7].start = 0x0x0000000000000016
[ 18.767854] mali-utgard ff300000.gpu: resource[8].start = 0x0x0000000000000017
[ 18.767862] D : [File] : drivers/gpu/arm/mali400/mali/platform/rk/rk.c; [Line] : 518; [Func] : mali_platform_device_init(); to add platform_specific_data to platform_device_of_mali.
[ 18.767893] mali-utgard ff300000.gpu: Looking up mali-supply from device tree
[ 18.768745] devfreq ff300000.gpu: Couldn't update frequency transition information.
[ 18.769374] systemd[1]: Mounting Variable Directory...
[ 18.769857] systemd[1]: Reached target Paths.
[ 18.770862] systemd[1]: Listening on RPCbind Server Activation Socket.
[ 18.771581] systemd[1]: Reached target RPC Port Mapper.
[ 18.772106] Mali: Mali device driver loaded
[ 18.772919] of_get_named_gpiod_flags: parsed 'gpios' property of node '/gpio-leds/standby-led[0]' - status (-517)
[ 18.781911] systemd[1]: Mounted Debug File System.
[ 18.782500] systemd[1]: Mounted POSIX Message Queue File System.
[ 18.783049] systemd[1]: Mounted Variable Directory.
[ 18.783571] systemd[1]: Mounted Temporary Directory.
[ 18.786197] systemd[1]: Started Samba Configuration.
[ 18.788981] systemd[1]: Started Debug Shell on /dev/ttyFIQ0.
[ 18.791268] systemd[1]: Started Load Kernel Modules.
[ 18.793022] systemd[1]: Started Create list of required static device nodes for the current kernel.
[ 18.794731] systemd[1]: Started Setup machine-id.
[ 18.796834] systemd[1]: Started Remount Root and Kernel File Systems.
[ 18.833100] systemd[1]: Starting udev Coldplug all Devices...
[ 18.835884] systemd[1]: Starting Journal Service...
[ 18.839698] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 18.842724] systemd[1]: Mounting Configuration File System...
[ 18.846301] systemd[1]: Starting Apply Kernel Variables...
[ 18.849364] systemd[1]: Starting Setup Timezone data...
[ 18.860910] systemd[1]: Mounted Configuration File System.
[ 18.869431] systemd[1]: Started Create Static Device Nodes in /dev.
[ 18.877415] systemd[1]: Reached target Local File Systems (Pre).
[ 18.880993] systemd[1]: Reached target Local File Systems.
[ 18.885783] systemd[1]: Started Setup Timezone data.
[ 18.895175] systemd[1]: Started Apply Kernel Variables.
[ 19.001995] systemd[1]: Started Journal Service.
[ 19.025756] systemd-journald[259]: Received request to flush runtime journal from PID 1
[ 20.229670] rk_gmac-dwmac ff540000.ethernet: rk_get_eth_addr: mac address: 3e:49:bb:ba:56:31
[ 20.229687] eth0: device MAC address 3e:49:bb:ba:56:31
[ 20.232273] of_get_named_gpiod_flags: parsed 'gpios' property of node '/gpio-leds/standby-led[0]' - status (-517)
[ 289.589252] drm_crtc_check_viewport: skip check
[ 307.298762] drm_crtc_check_viewport: skip check
[ 1125.902163] rk_gmac-dwmac ff540000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/txThe above dmesg log is from my first bootup of the Lakka test image :
Linux Lakka 4.4.83 #1 SMP Fri Sep 29 10:33:18 CDT 2017 aarch64 GUN/Linux
git version 28397b3
Rock64.arm-8.1.2
marcushh_Pb
retroarch does start; there are a couple of fonts missing, but most gnu+linux stuff works from busybox; python2.7 runs fine, nano and vim work (filesystem is ok), I am able to play around in the retroarch menu, see system information, exit and reboot; no problems.
There are no roms apparently; have not tried to play any games , nor have I tested my game pads yet. I left you some more detailed messages on irc ( use !msg get ) .
I'll be around my lab on Saturday should you have questions, catch me on IRC.
marcushh_Pb
notes:
Icons do not appear on the retroarch console menu; I tried to load content; and it did download; but I must be doing something wrong, because can't seem to do anything with it; I can navigate the console menu however;
The wifi settings fail to see my wifi dongle ; scan doesn't see local networks;
marcushh_Pb
marcushh777 
please join us for a chat @ irc.pine64.xyz:6667 or ssl irc.pine64.xyz:6697
( I regret that I am not able to respond to personal messages; let's meet on irc! )
please join us for a chat @ irc.pine64.xyz:6667 or ssl irc.pine64.xyz:6697
( I regret that I am not able to respond to personal messages; let's meet on irc! )
