|
An unofficial Fedora Installer for Pinebook Pro
|
I made an installer script for Fedora on Pinebook Pro. For now I am using Manjaro kernel. I have done a lot of testing, but comment, issues and PRs are welcome.
https://github.com/bengtfredh/pinebook-p...taller.git 
10-15-2020, 12:02 PM
Thanks for the script. I just used it to set up my pbp cause there is no official release till now. Running smooth, only the sound is horrible. Is there a patch missing to fix the sound issue?
(10-15-2020, 12:02 PM)stoelpi Wrote: Thanks for the script. I just used it to set up my pbp cause there is no official release till now. Running smooth, only the sound is horrible. Is there a patch missing to fix the sound issue? I am happy you like it. The sound is horrible, to be honest I have not looked in to it. I am working on a copr repo to make the image more fedorish. But check out this thread https://github.com/smithmcgriff/Fedora-o...o/issues/7. Try what @westurner writes in first post.
10-18-2020, 05:44 AM
(10-16-2020, 12:31 PM)aptupdate Wrote:(10-15-2020, 12:02 PM)stoelpi Wrote: Thanks for the script. I just used it to set up my pbp cause there is no official release till now. Running smooth, only the sound is horrible. Is there a patch missing to fix the sound issue? Thanks, with alsamixer I could adjust the sound. Do you know more about upcoming official support of the pbp, I didn’t find any definite statements? 
10-29-2020, 06:06 AM
10-30-2020, 05:58 AM
(10-29-2020, 06:06 AM)Rathann Wrote:(10-18-2020, 05:44 AM)stoelpi Wrote: Do you know more about upcoming official support of the pbp, I didn’t find any definite statements? Yes I also read this on the arm mailing list. Looking forward on it!
11-04-2020, 08:27 PM
11-21-2020, 08:46 AM
(11-04-2020, 08:27 PM)tllim Wrote:I did use the script to install fedora on an SD card. On my emmc I am running the original fedora 32 gnome image updated to 33 but still running the 5.7 kernel. Initially I tried to install fedora 33 with the install script but that failed (seem like this might be fixed) so installed fedora 32 and updated to 33 and installed the pbp-kernel (5.9.8).(10-29-2020, 06:06 AM)Rathann Wrote:(10-18-2020, 05:44 AM)stoelpi Wrote: Do you know more about upcoming official support of the pbp, I didn’t find any definite statements? wds@pinebookpro01 ~$ uname -a Linux pinebookpro01 5.9.8-1 #1 SMP Tue Nov 17 14:41:35 UTC 2020 aarch64 aarch64 aarch64 GNU/Linux Still need to run through a bunch of test especially suspend which I do not believes works. This is what I have installed from the copr: wds@pinebookpro01 ~$ dnf repository-packages copr:copr.fedorainfracloud.org:aptupdate:pinebook-pro list Fedora Modular 33 - aarch64 - Updates 78 kB/s | 14 kB 00:00 Fedora 33 - aarch64 - Updates 86 kB/s | 13 kB 00:00 Fedora 33 - aarch64 - Updates 721 kB/s | 1.4 MB 00:01 Installed Packages ap6256-firmware.aarch64 2020.02-5.fc33 @copr:copr.fedorainfracloud.org:aptupdate:pinebook-pro kernel-pbp.aarch64 5.9.8-1.fc33 @copr:copr.fedorainfracloud.org:aptupdate:pinebook-pro kernel-pbp-core.aarch64 5.9.8-1.fc33 @copr:copr.fedorainfracloud.org:aptupdate:pinebook-pro kernel-pbp-modules.aarch64 5.9.8-1.fc33 @copr:copr.fedorainfracloud.org:aptupdate:pinebook-pro pbp-keyboard-hwdb.aarch64 20200629-1.fc33 @copr:copr.fedorainfracloud.org:aptupdate:pinebook-pro pinebookpro-audio.aarch64 2-1.fc33 @copr:copr.fedorainfracloud.org:aptupdate:pinebook-pro pinebookpro-network.aarch64 1-1.fc33 @copr:copr.fedorainfracloud.org:aptupdate:pinebook-pro pinebookpro-suspend.aarch64 2-4.fc33 @copr:copr.fedorainfracloud.org:aptupdate:pinebook-pro Available Packages ap6256-firmware.src 2020.02-5.fc33 copr:copr.fedorainfracloud.org:aptupdate:pinebook-pro kernel-pbp.src 5.9.8-1.fc33 copr:copr.fedorainfracloud.org:aptupdate:pinebook-pro linux-manjaro.aarch64 5.9.6-1.fc33 copr:copr.fedorainfracloud.org:aptupdate:pinebook-pro linux-manjaro.src 5.9.6-1.fc33 copr:copr.fedorainfracloud.org:aptupdate:pinebook-pro pbp-keyboard-hwdb.src 20200629-1.fc33 copr:copr.fedorainfracloud.org:aptupdate:pinebook-pro pinebookpro-audio.src 2-1.fc33 copr:copr.fedorainfracloud.org:aptupdate:pinebook-pro pinebookpro-extlinux.aarch64 1-1.fc33 copr:copr.fedorainfracloud.org:aptupdate:pinebook-pro pinebookpro-extlinux.src 1-1.fc33 copr:copr.fedorainfracloud.org:aptupdate:pinebook-pro pinebookpro-network.src 1-1.fc33 copr:copr.fedorainfracloud.org:aptupdate:pinebook-pro pinebookpro-suspend.src 2-4.fc33 copr:copr.fedorainfracloud.org:aptupdate:pinebook-pro uboot-pinebookpro.aarch64 2020.10-1.fc33 copr:copr.fedorainfracloud.org:aptupdate:pinebook-pro uboot-pinebookpro.src 2020.10-1.fc33 copr:copr.fedorainfracloud.org:aptupdate:pinebook-pro wds@pinebookpro01 ~$ 
12-02-2020, 06:57 AM
(11-21-2020, 08:46 AM)immbelgique@007 Wrote:(11-04-2020, 08:27 PM)tllim Wrote:I did use the script to install fedora on an SD card. On my emmc I am running the original fedora 32 gnome image updated to 33 but still running the 5.7 kernel. Initially I tried to install fedora 33 with the install script but that failed (seem like this might be fixed) so installed fedora 32 and updated to 33 and installed the pbp-kernel (5.9.8).(10-29-2020, 06:06 AM)Rathann Wrote:(10-18-2020, 05:44 AM)stoelpi Wrote: Do you know more about upcoming official support of the pbp, I didn’t find any definite statements? Hi there, I've installed Fedora with this howto (https://github.com/bengtfredh/pinebook-p...taller.git) on a 16GB SD-Card. I've also a fedora installation on the EMMC (https://builds.armdevelopers.com/pineboo...pro.img.xz). The Pinebook-Pro always boot from EMMC, I think the SD-card-Image isn't working on my laptop. If I update my working EMMC-Image with kernel-pbp.aarch64, laptop is booting fine, but I have to leave the original (5.7) kernel. Otherwise the laptop can't boot anymore. @aptupdate: How can I get a working Fedora from your howto? Thanks Andreas
12-04-2020, 11:54 AM
(07-25-2020, 12:41 PM)aptupdate Wrote: I made an installer script for Fedora on Pinebook Pro. For now I am using Manjaro kernel. I have done a lot of testing, but comment, issues and PRs are welcome.Hello aptupdate thank you very much for these prebuild images https://s3.fredhs.net/minio/pinebook-pro-image/ Thats exactly what I'm looking for. Now I'm in the process to rebuild my Pinebook Pro with your image ! Next week I take your image and try to modify it for booting my Helios64 NAS-Device (it's based on the same processor and network card). Thanks Andreas |
