Приветствую уважаемые пользователи ресурса. Купил новый Пайн таб 2 и вот уже месяц ничего не могу настроить . Еле подключил его через юсб к телефону и заработал интернет . 
Оне обновляет ничего хотя предлагает но потом выдает ошибку , не создаёт пользователя , после создания обновляет и опять пусто . Не знаю что с ним делать , ничего невозможно установить помогите . Убунту тач не ставиться через убпортс на него . Как переустановить другую ос или настроить эту подскажите .

hello sorry if this has been answered but i couldnt find the info..my friend gave me his old mobian edition pine phone..it works great exept for it will only charge usb a to usb c and will not charge usb c to usb c...is this hardware firmware or OS? i have pbooted pmos currently running. thank you.

Hi guys, i bought today a used pinebook pro and i recived it with stock majaro and towboot. i tried to update towboot using

dd if=Tow-boot.spi.bin of=/dev/mtd0

i know it's not the best way to do that but i did it and reboot. Now my pinebook doesen't boot (no light. no sign of life i tried to disable eMMC and boot both manjaro and tow boot from SD card but it doesen't show sign of life and i really don't know what to do. Any help?

I have a Pine64+ single board computer, with the wifi/bt POT accessory.

Have successfully installed Debian 11 ( Bullseye ) and have that running, but cannot for the life of me seem to get the wifi/bt module enabled.

I have installed the firmware-realtek package, which should have the right firmware bits, but something else appears to be missing, and I'm at a loss.

Hi.

I can help with preparing images and translations to polish [my is native].
Current translations is mistake.

I can help too with bigger compiling.
I think about compile software with I can't find.

Soon will be winter then be more time spend at home.

Thanks for accepting my proposition.

Has anyone been able to get I2S to show up through the ALSA "aplay -l" command when running linux on the PINE A64-LTS. I attempted to follow some of the changes from this post: 
https://forum.pine64.org/showthread.php?tid=6906

But after modifying the equivalent .dts file overlay (mine is sun50i-a64-pine64-lts.dts) I am able to see i2s0 under /sys/firmware/devicetree/base/soc/i2s@1c22000/status is set to "okay". But when I run "aplay -l" I get the response "no soundcards found...". 

Any help is appreciated.

What is the recommended application to monitor the video from multiple PineCubes at a time?  Looking for FOSS alternatives to BlueIris and Amcrest Survalance Pro

Hi.

Why battery have so small capacity?
Is possibly put inside 5 AH?

Thanks for answer.

Hi everyone,

I have a Pine A64 that I want to start using again, and I tried to downloaded the Pine64 installer, to install lunix OS, from the github repo here and it is not functional!  
When i was first using this board a few years ago the software worked. The sofware will not let me select a my type of board or what type of software I want to flash to it. I tried downloading it on my Mac and windows, and they both do not work. So then I tried using etcher to flash my sd card with this ububtu arm image but it didnt work either. 

When I plug the board in it with the flashed sd card it only turns on with a red light. Does anyone know if it is my SD card or my board. I have not used this in a long time and there isnt much support on it.

Any help will be appreciated !

Just updated Pinetab2:
Wifi works now!
Splash screen has correct orientation now (landscape)

Operating System: Arch Linux ARM
KDE Plasma Version: 6.1.3
KDE Frameworks Version: 6.4.0
Qt Version: 6.7.2
Kernel Version: 6.9.9-danctnix1-1-pinetab2 (64-bit)
Graphics Platform: Wayland

Thanks to all that got this working!