I have the Mobian August 15th nightly running from the sd card on one of my PMOS Convergent phones.

The cellular data is working okay,  but I cannot seem to get the Hotspot to turn on...  ?

I do not know if that is a carrier problem,  or a software problem.    BUT it Did Work the last time I tried it..?

I do not use data very often on my Pine phone,  and

 *   I do not remember how long ago it was the last time I used the hotspot,   

                on this phone, it is still the same carrier as when it did work,  'Pure Talk',  they are an MVNO of AT&T.

Sw is mobian phosh (wayland), fully updated

I am available for further tests

298.914874] ------------[ cut here ]------------
[  298.919631] [CRTC:41:crtc-0] vblank wait timed out
[  298.927268] WARNING: CPU: 2 PID: 112 at drivers/gpu/drm/drm_atomic_helper.c:1512 drm_atomic_helper_wait_for_vblanks.part.0+0x270/0x29c
[  298.939357] Modules linked in: option usb_wwan qmi_wwan usbserial cdc_wdm rfcomm algif_hash algif_skcipher af_alg bnep lz4 zram zsmalloc usb_f_ecm u_ether libcomposite cdc_ether usbnet 8723cs© aes_ce_blk crypto_simd cryptd ghash_ce gf128mul sha2_ce gpio_vibra sha1_ce hci_uart st_magn_i2c btrtl btbcm r8152 axp20x_battery sun8i_di axp20x_adc axp20x_pek bluetooth st_sensors_i2c cfg80211 mii inv_mpu6050_i2c st_magn inv_mpu6050 sun50i_codec_analog st_sensors sun8i_adda_pr_regmap sun6i_csi industrialio_triggered_buffer goodix kfifo_buf ecdh_generic ecc anx7688 stk3310 typec sun8i_rotate sun8i_codec sunxi_cedrus© rfkill sun4i_i2s v4l2_mem2mem sun8i_ce videobuf2_dma_contig videobuf2_memops videobuf2_v4l2 snd_soc_simple_amplifier crypto_engine gc2145 videobuf2_common ov5640 leds_sgm3140 v4l2_fwnode v4l2_flash_led_class rng_core snd_soc_ec25 snd_soc_bt_sco snd_soc_simple_card snd_soc_simple_card_utils videodev snd_soc_core snd_pcm_dmaengine snd_pcm mc snd_timer snd soundcore fuse configfs
[  298.939666]  ip_tables x_tables axp20x_usb_power industrialio sunxi phy_generic musb_hdrc sun4i_lradc_keys udc_core arm_scpi i2c_gpio
[  299.038562] CPU: 2 PID: 112 Comm: kworker/u8:3 Tainted: G        WC        5.10-sunxi64 #1
[  299.046813] Hardware name: Pine64 PinePhone (1.2) (DT)
[  299.051958] Workqueue: events_unbound commit_work
[  299.056665] pstate: 60400005 (nZCv daif +PAN -UAO -TCO BTYPE=--)
[  299.062669] pc : drm_atomic_helper_wait_for_vblanks.part.0+0x270/0x29c
[  299.069189] lr : drm_atomic_helper_wait_for_vblanks.part.0+0x270/0x29c
[  299.075706] sp : ffffffc012253c90
[  299.079015] x29: ffffffc012253c90 x28: 00000000000028f1
[  299.084327] x27: 0000000000000000 x26: 0000000000000001
[  299.089638] x25: 0000000000000038 x24: ffffff800222d800
[  299.094950] x23: 0000000000000001 x22: 0000000000000000
[  299.100260] x21: ffffff801f094400 x20: ffffff800222f880
[  299.105570] x19: 0000000000000000 x18: 0000000000000000
[  299.110881] x17: 0000000000000000 x16: 0000000000000000
[  299.116191] x15: 00001e34a58055dc x14: 00000000000001a6
[  299.121501] x13: 00000000000001a6 x12: 0000000000000000
[  299.126812] x11: 0000000000000002 x10: 0000000000000970
[  299.132123] x9 : ffffffc0122539c0 x8 : ffffff80047b2450
[  299.137434] x7 : ffffff80bc9a9200 x6 : 000000000078d88c
[  299.142745] x5 : 0000000000000000 x4 : 0000000000000000
[  299.148056] x3 : ffffffc010eaf000 x2 : 0000000000000000
[  299.153366] x1 : 0000000000000000 x0 : ffffff80047b1a80
[  299.158677] Call trace:
[  299.161119]  drm_atomic_helper_wait_for_vblanks.part.0+0x270/0x29c
[  299.167295]  drm_atomic_helper_commit_tail_rpm+0x7c/0x9c
[  299.172599]  commit_tail+0x9c/0x164
[  299.176085]  commit_work+0x10/0x1c
[  299.179489]  process_one_work+0x1cc/0x330
[  299.183495]  worker_thread+0x14c/0x450
[  299.187242]  kthread+0x13c/0x150
[  299.190470]  ret_from_fork+0x10/0x18
[  299.194041] ---[ end trace 2c8bb7e0224e09b4 ]---

I understand I can overclock the rockpro64 by modifying the dtb.  I was able to decompile it into a dts and edit it with values I found from the OP1 dtsi, but I cannot get it to compile with them back into a DTB.  I know if I screw this up a certain way, I can burn my board, so rather than post my edit here and risk missing something, I want to understand how someone was able to do it properly.  I saw pin64 has a page in their wiki, but it's more of an explanation of how it works than how to accomplish it.  Is anyone willing to write this howto?

Hello...!

Shortly I read about 'Clapper' which plays back videos using hardware acceleration on the PinePhone, at least if the video's codec is H.264. I have a video file, whose codec is H.264 but the screen simply stays black, it doesn't even start.
On Youtube I saw a demonstration of Clapper with a demo video (screenshots of this video are on the flathub site linked above). Can someone point me to this demo video or another video that works so I can take a look at the specs. I'd like to encode some videos with Handbrake according to those specs.

Thanks for any hint!

I just received my Pine Watch and upgraded the firmware to 1.2.0. Seemed to happen almost as i was going through the settings. My main question is how do I set the time on it? I'm using Manjaro on my Pine Phone and can get it to connect via Bluetooth, but not much else. Is the an app that's needed? Any advice would be greatly appreciated. Thanks.

I've running Manjaro Linux Mobile Plasma, and 4G connectivity is unreliable.
Sometimes it will just show "modem busy" or "the modem shows no carrier" messages, while other times it will connect properly. But next time it disconnects from the 4G network which could be 30 minutes to over 24 hours, it will not recover. The only option I have found so far is to reboot the phone. Sometimes, I have to do this 5 to 10 times to get a connection. Is there anything I could do to prevent this issue, or at least force reconnect without a reboot each time the connection is lost? Thank you.

Hi,

I am trying to place order from Saudi arabia but the proceed to Paypal is not working "No shipping method has been selected. Please double check your address, or contact us if you need any help."

I want to know are you guys shipping pinephone to Saudi Arabia?

Hello,

I've tried several images (I'm booting from the SD card) but none give any output on the hdmi port.  I noticed the images say for 7" LCD is this why? If so how can I modify the image or code to output to the hdmi port?  Also if there's a link for the Android 9 source used on the PRO do anyone have a link.


Thanks,
Aaron

ungraded software to 1.1.3 all looks good with time etc but screen not responding to touch.

I've been using a wired headset with the Pinephone in noisy environments since the built-in earpiece volume is usually pretty low. Suddenly I'm finding that the microphone is not working. I can hear the call just fine, but the person on the other end cannot har me. Tried leaving voicemail to myself with the same result. Figuring maybe the microphone just went bad I bought another headset but it has the same problem. I tried toggling the mute button on the mic and the Pinephone screen reacts but the microphone still doesn't work on either headset.

This is in Mobian. I checked the settings and the input is set to the Headset Microphone with volume on full. The headsets have 4-conductor jacks. Should I try one with 3 conductors? Or did a software update knock out the audio path from the microphone to the modem?