Hello

I have got a PineCube running Armbian, and is also using Uboot 2021.07-armbian.

I have found that the mac address keeps changing, and consequently the ip address keeps changing too. This is a real nuiscence.

I have looked for a soltution to this problem, and found some ideas on the One64 forum. Unforutnately the suggestions there didn't work for me on the PineCube.

I have tried adding these to /boot/boot.cmd (no both at once)

Quote:cat /proc/cmdline

Hi All,

On a linux desktop, one way to access your device is to edit the "/etc/fstab" to mount your device permanently so you can access it.

Reading postmarketOS's wiki about fstab, it told you to activate "rc-update" and the localmount service, which is the command:

Hello there,

Axolotl is currently using Electron 15 as frontend and there are some bugs, which are a bit odd and I would like to ask, if anyone here has some experience with Electron and could provide some help.

1. Web links are opened in Axolotl instead of browser
https://github.com/nanu-c/axolotl/issues/538

2. Onscreen Keyboard not showing up
https://github.com/nanu-c/axolotl/issues/582

3. Input of certain letters not possible
https://github.com/nanu-c/axolotl/issues/635

From my point of view, all three bugs are connected to the Electron-Axolotl relationship, but my skills in this field are limited...

So it would be awesome, if some clues could be found.

Thanks in advance!

My phone was purchased as KDE Community Edition, but after initial distro-hopping, I settled into Mobian stable.

At that time phone calls would drop some times, but most of the time they did work.  I was more or less happy with it as a daily driver (in terms of a phone, anyway).

4G worked, even VoLTE worked (to my surprise!).

Then, maybe a week ago, I changed a couple things at the same time:

1. I upgraded Mobian to Bookworm.
   
2. I changed my SIM and carrier.
   
3. I may have even bent one of SIM pins in the process (not sure though, maybe not).
   

1. I never changed any firmware from stock.
   
2. I never changed kernel from default.
   

Was so excited to finally get my hands on one of these they were being scalped and outa stock for nearly 6 months straight.

When I was finally able to buy I bought 2 the pine desktop power station the usb C cable extra tips the stand the works.

It gets here I proceed to use the USB C cable it powers on I go to attempt first project it will not heat up past 23 c max temp 35c.

1 checked out YT videos on this from every video iv seen they plug it in click the - button and there off to the rceztit heats up and it's going.

2. This sits at 23 c no matter what I try doesn't bother heating up so I thought maybe one of the pine device's has failed so I ordered a labtop brick with voltage control.

3. Waited 3 weeks for it to arrive test it same result will not heat up at all powers on bit won't heat up like every video I seen on this.

Anyone else have this issue?

I have recently started using my Pinebook Pro with a Dell usb-c dock and 4k external display.  After updating the computer this evening (it had been a week or two) and plugging it back into the dock after restarting it my bluetooth stopped working and about the right third of the external display is showing only static (built-in display still works without issues).  I was never able to get it to boot properly attached to the dock, I have always had to plug it back in after logging in.

After fiddling with the bluetooth and several restarts, it's working again.  However, the external display is still showing static on the right side.  I have tested another laptop with the dock and external display and there are no issues.

Any thoughts or suggestions?  Anything else I can troubleshoot or test?  My first thought is a hardware issue (I have used the usb-c ports only a handful of times so far), but it seems weird that it started just after an update.  I would really like to get it working with my external display again.  It makes the experience so much better.

where else can i download the SDK? the direct from pine64 is limiting me to 163Kb/s and now it keeps failing at 19GB. saying it will take me 6days to download and i have a 1Gb/s internet connection.

also facing the same problem for the linux SDK....

is there a GIT hub for this?

hello,
how can I run from only the SD card? the images i found are eMMC only and I do not have one.
My goal is to get the CSI port up and running with my work products. I need the ability to send i2c commands via GPIO header to other devices that we manufacture.

end target of this is to show other tier1 manufactures our parts with a mock car head unit.

Currently downloading the android SDK from pine but it is slow to get. 233Kb/s

A while ago my pinephone had seemed to had have wifi, bluetooth, gsettings, and various other services disabled that I've addressed in my most recent few threads.

I currently have the phone connected to a pc through jumpdrive and have the / directory accessible. How can I recover the installation of arch-phosh.

I recently registered this forum account, but several things/features fail with the following message:

Quote:You do not have permission to access this page. This could be because of one of the following reasons:

1. Your account has either been suspended or you have been banned from accessing this resource.
   
2. You do not have permission to access this page. Are you trying to access administrative pages or a resource that you shouldn't be? Check in the forum rules that you are allowed to perform this action.
   
3. Your account may still be awaiting activation or moderation. (Resend Activation Code)
   
4. You have accessed this page directly rather than using appropriate forms or link.
   

You are currently logged in with the username: 'diederik'