Unable to install Debian Bullseye because of missing wifi firmware
I am trying to install Debian Bullseye. I have Tow-Boot already installed to SPI.

From http://http.us.debian.org/debian/dists/b...rd-images/ I downloaded 'partition.img,gz' and 'firmware.pinebook-pro-rk3399.img.gz' and combined them as per the accompanying README:

zcat ~/firmware.pinebook-pro-rk3399.img.gz ~/partition.img.gz > ~/complete_image.img

I then used Disk Image Writer to write the resulting image to SD.

The PBP/Tow-Boot boots the installer and I get to select Location, Language, Locale and Keyboard. The installer then probes the networking hardware and reports:

Quote:[!] Detect network hardware
Some of your hardware needs non-free firmware files to operate. The firmware can be loaded from removable media such as a USB stick or floppy. The missing firmware files are:
If you have such media available now, insert it, and continue.
Load missing firmware from removable media? [Yes/No]

I assumed this firmware would have been in the firmware image I used to create the installer.

I searched online but couldn't find these files.

On an SD card with Debian installed with Daniel Thompson's installer (unfortunately not longer working) I found 2 brcm directories with the following files:
Notably there is no 'brcmfmac43456-sdio.pine64,pinebook-pro.bin', but there is a .txt file with the same name.

I copied all these files to a USB thumb drive (EXT4). Running the installer again and answering 'Yes' to the 'Load missing firmware from removable media?' question only results in the installer repeating the question. Selecting 'No' gets me to a list of drivers to choose from but none of the Broadcom drivers selectable work.

What am I doing wrong?
OK, what I have in my debian sd card is
brcm]$ ls -l
total 624
lrwxrwxrwx 1 root root 17 Jul 25 2021 BCM-0a5c-6410.hcd -> BCM-0bb4-0306.hcd
-rw-r--r-- 1 root root 54734 Jul 25 2021 BCM-0bb4-0306.hcd
-rw-rw-r-- 1 d d 39411 Dec 5 2019 BCM4345C5.hcd
-rw-rw-r-- 1 d d 508373 Dec 5 2019 brcmfmac43456-sdio.bin
-rw-rw-r-- 1 d d 14036 Dec 5 2019 brcmfmac43456-sdio.clm_blob
-rw-rw-r-- 1 d d 2554 Jan 21 2020 brcmfmac43456-sdio.pine64,pinebook-pro.txt
-rw-rw-r-- 1 d d 2554 Dec 5 2019 brcmfmac43456-sdio.radxa,rockpi4.txt
-rw-r--r-- 1 1000 1000 2196 Jan 16 2020 brcmfmac43456-sdio.txt
I got rid of everything that was not 43456, except for the link, so long ago I don't remember details
But, I won't use a distro that does not have 'good' sleep, very few do

Possibly Related Threads…
Thread Author Replies Views Last Post
  PBP won’t boot from eMMC after Debian update / Tow-Boot installer won’t boot from SD Pino64 21 681 05-12-2022, 05:00 AM
Last Post: Pino64
  How to pack the firmware whit Rockchip loader bin files Brandwarden 3 195 04-29-2022, 12:18 PM
Last Post: wdt
Information Found newer firmware for broadcom wifi (brcmfmac43456-sdio) cobratbq 2 306 04-12-2022, 02:36 PM
Last Post: cobratbq
  Dual boot Manjaro and Debian? dieselnutjob 3 350 03-26-2022, 07:17 AM
Last Post: dieselnutjob
  Unsuccessful using danielt's unofficial Debian installer on the PBP joeDoe 1 442 03-25-2022, 08:15 AM
Last Post: danielt
  Installing debian on pinebook pro (deb installer/emmc) ljones 14 2,716 02-08-2022, 02:47 AM
Last Post: Humid Stylus
  Install the DDE desktop environment wangyukunshan 0 416 12-23-2021, 06:51 PM
Last Post: wangyukunshan
  Debian GPU Support Atton 5 2,832 12-02-2021, 05:37 PM
Last Post: cobratbq
  Solution for issue with 'panfrost' module not initializing due to missing dependency cobratbq 0 437 12-02-2021, 05:26 PM
Last Post: cobratbq
  setting up fedora from minimal install pine76 0 436 11-30-2021, 10:47 AM
Last Post: pine76

Forum Jump:

Users browsing this thread: 1 Guest(s)