PBP won’t boot from eMMC after Debian update / Tow-Boot installer won’t boot from SD
04-28-2022, 10:23 AM
(This post was last modified: 04-28-2022, 10:36 AM by Pino64.
Edit Reason: Facepalm emoticon not working
)
(04-28-2022, 03:01 AM)wdt Wrote: replace /dev/emmc with appropriate /dev/mmcblkX (where X=0,1,2,,, whichever)
lsblk,,, the one with .../boot[0,1]
Do NOT use any partition, just the whole raw device
Oops
, sorry for making you go Facepalm.I think I eventually succeeded to make a copy but when I open the resulting 4.2MB file in GHex I see only 00’s on every line.
Quote:I think that with my limited linux skill set my best bet at the moment is to get Tow-Boot to work from the SPI with that new SD card and then see if I can get Bullseye to boot off the emmc with that.Unfortunately the Tow-Boot spi installer doesn’t want to boot from the new class 4 SD card either. Maybe I’ll have to go the nandwrite way..
