06-26-2020, 06:16 PM
*
As stated in the boot order in the wiki,
The actual 'boot order' (Not boot loader) is on the eMMC
so if your eMMC is corrupted it will not boot without some extra measures, like turning off your eMMC switch inside.
>>The "easy" fix is to use the eMMC to USB adapter and flash the eMMC directly. <<
IF you look at some of the older posts this was discussed a lot last year.
The SPI is shipped blank, but some flash their boot order on to that to be able to boot from their added SSD drive.
but That should only be done after some very serious investigating !
As stated in the boot order in the wiki,
The actual 'boot order' (Not boot loader) is on the eMMC
so if your eMMC is corrupted it will not boot without some extra measures, like turning off your eMMC switch inside.
>>The "easy" fix is to use the eMMC to USB adapter and flash the eMMC directly. <<
IF you look at some of the older posts this was discussed a lot last year.
The SPI is shipped blank, but some flash their boot order on to that to be able to boot from their added SSD drive.
but That should only be done after some very serious investigating !
LINUX = CHOICES
**BCnAZ**
Donate to $upport
your favorite OS Team
**BCnAZ**
Donate to $upport
your favorite OS Team