How to get kernel boot messages on screen on Manjaro
#1
From a certain moment they can be seen if you change in boot.txt:

from:
console=ttyS2,1500000n8
to:
console=tty1

and remove the bootsplash part so the line reads:

setenv bootargs console=tty1 root=/dev/nvme0n1p2 rw rootwait  (I have my root on nvme - your root might be elsewhere !!!)

Than - ./mkscr and reboot.

This is necessary for encryption to be able to enter password for your encrypted device.
  Reply
#2
I did your steps and did not see any messages at boot.. then again i don't have encryption set up, so this might be why.
  Reply
#3
You should be seeing messages whether you have encryption or not.
  Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  kernel build script for latest mainline manjaro kernel xmixahlx 3 373 02-19-2020, 07:19 PM
Last Post: xmixahlx
  full disk encryption with luks on manjaro xfce limxr 8 443 02-19-2020, 08:03 AM
Last Post: as400
  How to boot Manjaro from NVME with uboot on eMMC as400 39 914 01-30-2020, 02:23 AM
Last Post: mamboman777
  Manjaro: Enable Natural Scrolling (Reverse scrolling direction) kiddailey 0 128 01-22-2020, 08:10 PM
Last Post: kiddailey
Music working play/pause media keys in Manjaro KDE clover 0 122 01-14-2020, 06:46 PM
Last Post: clover
  Adjust brightness of backlight i3w-Manjaro Gerhard 0 126 01-05-2020, 04:06 PM
Last Post: Gerhard
  i3blocks Manjaro battery status script Gerhard 0 179 01-05-2020, 02:35 PM
Last Post: Gerhard
  Instructions for Installing VS Code on Manjaro clover 3 395 12-20-2019, 10:18 PM
Last Post: tophneal
  Dual booting Linux with ChromiumOS using "boot floppy" Wizzard 5 375 11-28-2019, 12:23 PM
Last Post: TDC_PBP

Forum Jump:


Users browsing this thread: 1 Guest(s)