board not working with EMMC
#1
I etrched (EMMC) OS onto EMMC using Pine64 EMMC/USB adapter.

power light and ethernet light came on only.  Waited 10 minutes..nothing else.

I etched microsdxc system booted lights on both ends lit up appropriately..

I re-imaged EMMC, removed SD attached EMMC and same as 1sst time. No boot. only lights were at power and ethernet (no lights on other end even, again) no boot after long wait.

I am DISABLED. I ordered the entire 4GBPro and all components available in August.  I received ln "LATER SHIPMENT". 

I HAD MEDICAL ISSUES DUE TO DISABILITY AND ""ONLY"" now was I aable to  unpackage and start to get the RockPro64 up and going. 

By the above issues to me atleast it sounds as if the  EMMC is potentially a bad one if BOARD runs off SD.

Outside of 30 days / but due to medical delay, can I get permission to return/swap out EMMC?

Most Humble appreciation for your time and consdieration.

i am dedicated to your RockPro64 product.  Once I get this one up and running as super efficient desk unit for me,  I have other real projects requireing 10-12 more Units with all components being used as many different key projects.  I want RockPro64 as my (backbone) to everything I set up and run.
  Reply
#2
This might sound weird, but did you try booting with both SD and eMMC card present? I had to try this workaround when booting eMMC on my Rock64. For long term you can also set the jumper pins correctly.

My RockPro64 boots from eMMC out of the box however.
  Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  board not working kardanadm 7 378 08-31-2019, 07:37 AM
Last Post: kardanadm
  Availability of 128GB eMMC ? Arwen 1 332 07-22-2019, 11:28 AM
Last Post: Arwen
  PCIe SSD drive still not working ?? dr_ju_ju 7 986 04-15-2019, 04:16 PM
Last Post: tllim
  EMMC not booting while SD does. Apokalypz 29 3,313 03-10-2019, 04:12 AM
Last Post: graham-r
  emmc / sd or ssd? LMM 3 426 02-22-2019, 08:51 AM
Last Post: LMM
  Is my board dead? (again) duckkcud 8 692 01-24-2019, 07:12 PM
Last Post: 40four
  Only ttyS2 working with rockpro64. rahulsharma 1 214 01-15-2019, 12:33 AM
Last Post: rahulsharma
  Review/Advice for new board owner (support,purchase etc) tinkerdan 8 1,028 12-24-2018, 10:07 PM
Last Post: celer
  RockPro64 Features/options working/not working lavermil 9 1,221 10-23-2018, 02:48 AM
Last Post: lavermil
  Is my board dead? [SOLVED] duckkcud 2 411 10-15-2018, 07:46 PM
Last Post: duckkcud

Forum Jump:


Users browsing this thread: 1 Guest(s)