Can't get Rockpro to boot
#1
I've been on for a week or so when i've had time but i'm still unable to get anything from Hdmi.
Both lights on the ethernet are solid as well as the green light next to the psu in. I have never seen the white light behind the reset switch lit.
I have a 32GB emmc and a decent samsung sd card, i've written ubuntu minimal to both but have been unable to boot anything. Windows does throw a bit of a hissy after writing with etcher but the image appears to be valid, i've also tried other images. 

Psu is 12v @3000mA. I could possibly try another but don't have one to hand and that is probably now the only thing i have left to do, unless windows is botching the writing process.
I wondered if there was something i have missed, i don't have much experience with Sbc's and i'm really struggling with this one.
#2
(12-14-2018, 06:51 PM)Crnppscls Wrote: I've been on for a week or so  when i've had time but i'm still unable to get anything from Hdmi.
Both lights on the ethernet are solid as well as the green light next to the psu in. I have never seen the white light behind the reset switch lit.
I have a 32GB emmc and a decent samsung sd card, i've written ubuntu minimal to both but have been unable to boot anything. Windows does throw a bit of a hissy after writing with etcher but the image appears to be valid, i've also tried other images. 

Psu is 12v @3000mA. I could possibly try another but don't have one to hand and that is probably now the only thing i have left to do, unless windows is botching the writing process.
I wondered if there was something i have missed, i don't have much experience with Sbc's and i'm really struggling with this one.


Which image did you write to emmc?
#3
(12-15-2018, 12:13 AM)evilbunny Wrote:
(12-14-2018, 06:51 PM)Crnppscls Wrote: I've been on for a week or so  when i've had time but i'm still unable to get anything from Hdmi.
Both lights on the ethernet are solid as well as the green light next to the psu in. I have never seen the white light behind the reset switch lit.
I have a 32GB emmc and a decent samsung sd card, i've written ubuntu minimal to both but have been unable to boot anything. Windows does throw a bit of a hissy after writing with etcher but the image appears to be valid, i've also tried other images. 

Psu is 12v @3000mA. I could possibly try another but don't have one to hand and that is probably now the only thing i have left to do, unless windows is botching the writing process.
I wondered if there was something i have missed, i don't have much experience with Sbc's and i'm really struggling with this one.


Which image did you write to emmc?

This one:    http://wiki.pine64.org/index.php/ROCKPro...0.7.9.5D_2
#4
When the white led don't turn on, the rockpro64 don't boot. So wrong image and so on....

Please test with this image -> http://wiki.pine64.org/index.php/ROCKPro....5B5.67.5D
Sorry for any mistakes. English is not my native language

1. RP64 v2.1 / PCIe SATA JMS585 Chipsatz / Booting from an 2,5 Zoll SSD on port 5/ 2 * 3,5 Zoll 4TB HDD (raid1) md0 / 2 * 2,5 Zoll 2TB HDD (raid1) md1 / using as NAS / Kernel 5.6.0-1137-ayufan-ge57f05e7bf8f

2. RP64 v2.1 / testing.....testing....testing

3. Quartz64 Model A with 4GB RAM

https://forum.frank-mankel.org/category/14/rockpro64
#5
(12-15-2018, 04:39 PM)Bullet64 Wrote: When the white led don't turn on, the rockpro64 don't boot. So wrong image and so on....

Please test with this image -> http://wiki.pine64.org/index.php/ROCKPro....5B5.67.5D

I burnt the image to the sd card and emmc, unfortunately there is still nothing coming from hdmi. My monitor just goes into standby because there is no signal, i even tried it on my tv and there was nothing.
I tried the emmc and sc card together, then individually and the result was still the same.

Thanks for your help though, i think i'm going to have to Rma the board, which is a shame because it's going to be well into the new year before a replacement arrives


Possibly Related Threads…
Thread Author Replies Views Last Post
  Mainline U-Boot with SPI, NVMe and SATA boot support sigmaris 103 44,619 07-08-2021, 04:55 PM
Last Post: Mentaluproar
  Device unable to boot Lunix33 7 624 07-05-2021, 08:25 PM
Last Post: t4_4t
  Rockpro 64 with analog input jintao6889423 3 1,659 05-13-2021, 09:41 PM
Last Post: KC9UDX
  First boot - no fan, no display... is it broken? rantoie 1 397 04-28-2021, 04:41 PM
Last Post: rantoie
  PXE boot - unable to login LMM 2 557 04-22-2021, 02:59 PM
Last Post: LMM
  unable to boot from SDCard Charles Tarkowski 4 1,379 12-16-2020, 11:11 AM
Last Post: Charles Tarkowski
  Rockpro64 boot issues larsgn 14 8,180 10-21-2020, 07:54 AM
Last Post: quinterro
  RockPro64 eMMC boot euu 4 3,115 08-24-2020, 11:07 PM
Last Post: t4_4t
  Fedora 32 on ROCKPro 64. joeblues91 4 3,063 07-26-2020, 12:12 PM
Last Post: revoman
  RockPro64 so problematic! Boot issues PorterDon 1 1,610 06-04-2020, 12:25 PM
Last Post: dukla2000

Forum Jump:


Users browsing this thread: 1 Guest(s)