Can't get Rockpro to boot
#1
I've been on for a week or so when i've had time but i'm still unable to get anything from Hdmi.
Both lights on the ethernet are solid as well as the green light next to the psu in. I have never seen the white light behind the reset switch lit.
I have a 32GB emmc and a decent samsung sd card, i've written ubuntu minimal to both but have been unable to boot anything. Windows does throw a bit of a hissy after writing with etcher but the image appears to be valid, i've also tried other images. 

Psu is 12v @3000mA. I could possibly try another but don't have one to hand and that is probably now the only thing i have left to do, unless windows is botching the writing process.
I wondered if there was something i have missed, i don't have much experience with Sbc's and i'm really struggling with this one.
#2
(12-14-2018, 06:51 PM)Crnppscls Wrote: I've been on for a week or so  when i've had time but i'm still unable to get anything from Hdmi.
Both lights on the ethernet are solid as well as the green light next to the psu in. I have never seen the white light behind the reset switch lit.
I have a 32GB emmc and a decent samsung sd card, i've written ubuntu minimal to both but have been unable to boot anything. Windows does throw a bit of a hissy after writing with etcher but the image appears to be valid, i've also tried other images. 

Psu is 12v @3000mA. I could possibly try another but don't have one to hand and that is probably now the only thing i have left to do, unless windows is botching the writing process.
I wondered if there was something i have missed, i don't have much experience with Sbc's and i'm really struggling with this one.


Which image did you write to emmc?
#3
(12-15-2018, 12:13 AM)evilbunny Wrote:
(12-14-2018, 06:51 PM)Crnppscls Wrote: I've been on for a week or so  when i've had time but i'm still unable to get anything from Hdmi.
Both lights on the ethernet are solid as well as the green light next to the psu in. I have never seen the white light behind the reset switch lit.
I have a 32GB emmc and a decent samsung sd card, i've written ubuntu minimal to both but have been unable to boot anything. Windows does throw a bit of a hissy after writing with etcher but the image appears to be valid, i've also tried other images. 

Psu is 12v @3000mA. I could possibly try another but don't have one to hand and that is probably now the only thing i have left to do, unless windows is botching the writing process.
I wondered if there was something i have missed, i don't have much experience with Sbc's and i'm really struggling with this one.


Which image did you write to emmc?

This one:    http://wiki.pine64.org/index.php/ROCKPro...0.7.9.5D_2
#4
When the white led don't turn on, the rockpro64 don't boot. So wrong image and so on....

Please test with this image -> http://wiki.pine64.org/index.php/ROCKPro....5B5.67.5D
Sorry for any mistakes. English is not my native language

1. Quartz64 Model B, 4GB RAM

2. Quartz64 Model A, 4GB RAM

3. RockPro64 v2.1

https://linux-nerds.org/
#5
(12-15-2018, 04:39 PM)Bullet64 Wrote: When the white led don't turn on, the rockpro64 don't boot. So wrong image and so on....

Please test with this image -> http://wiki.pine64.org/index.php/ROCKPro....5B5.67.5D

I burnt the image to the sd card and emmc, unfortunately there is still nothing coming from hdmi. My monitor just goes into standby because there is no signal, i even tried it on my tv and there was nothing.
I tried the emmc and sc card together, then individually and the result was still the same.

Thanks for your help though, i think i'm going to have to Rma the board, which is a shame because it's going to be well into the new year before a replacement arrives


Possibly Related Threads…
Thread Author Replies Views Last Post
  Can i use this Emmc for Rockpro 64 Supratec 2 574 12-20-2023, 09:12 AM
Last Post: wdt
  enble boot after power loss/restore dkebler 18 8,943 12-04-2023, 12:14 PM
Last Post: ok38
  Mainline U-Boot with SPI, NVMe and SATA boot support sigmaris 108 116,539 09-25-2023, 12:46 AM
Last Post: ChriChri
Bug Broken boot: What am I missing? mkosarek 1 607 09-08-2023, 08:14 AM
Last Post: wdt
  Unable to boot Armbian on new RockPro64 mooseball 5 4,085 07-14-2023, 08:59 AM
Last Post: rockjonn
  no boot white led flashing moserwi 7 4,108 05-18-2023, 10:46 AM
Last Post: wdt
  red led blink on rockpro pine 64 Daniele14521 0 1,066 09-26-2022, 01:40 AM
Last Post: Daniele14521
  u-boot locked on pine64pro ljones 1 1,477 09-06-2022, 10:32 AM
Last Post: ljones
  Cannot get my board to boot deutschlmao 11 7,829 09-05-2022, 04:23 PM
Last Post: ljones
  U-BOOT Tutorial hazz 0 1,109 07-19-2022, 10:48 PM
Last Post: hazz

Forum Jump:


Users browsing this thread: 2 Guest(s)