New ROCK64 doesn't boot
#1
Hello all:
in first place, I want to say hello to all, I'm a new user of Rock64 and this forum.

I've received my new Rock64 yesterday, and I can't get to boot never... 
I've tried with a lot of images from the Pine64 installer and others burned with Etcher (ubuntu, xenial, diet, openmediavault, etc)
I've tried with two differents SD cards
I've tried with network and without it
I've tried with a usbserial connected to 6, 8 and 10 pin to monitor console output (no output received)

... and the result is always the same:

The green led is on
The red led is on
The white led is on
All permanently
And there is no output from HDMI


Someone can help me to understand what's wrong? Am I missing something?


Thanks in advance...
  Reply
#2
(06-02-2018, 05:05 AM)p3ntium Wrote: Someone can help me to understand what's wrong? Am I missing something?

Are you using a TV or Monitor?

What resolution etc?

Are you able to check what IP it gets from your router and try pinging it?
  Reply
#3
Hi:
It's a monitor Up to 1920ppp
Yes the ethernet cable is always connected and the rock64 never gets IP
Thnkss
  Reply
#4
Have you tried powering it up without the SD card inserted. What is the status of the LEDs when you do this.
  Reply
#5
Hi:
I've tested now. The result is the same:

The green led is on
The red led is on
The white led is on
All permanently

Sad
  Reply
#6
Someone can say me a stable image that works for sure. I want to test if my board can run almost one time.
I don't know if my Rock64 is broken or I'm wrong at all...

Thanks!!!
  Reply
#7
these are old but stable releases
https://github.com/ayufan-rock64/linux-b...tag/0.5.10
  Reply
#8
I've tested with a pair of these and the same result....

Always it's hard like this? I mean, I have a lot of raspberries pi 3 and all boot at first time after burn the image with etcher.
With this board (Rock64), after my experience and other posts I've read, it seems that the Rock64 is hard to get a stable boot...

It's very frustrating...
  Reply
#9
This one worked for me first time. Try it yourself and see https://www.armbian.com/rock64/
  Reply
#10
I've already tested these images. The same results:

All 3 leds on
Ethernet led on

And nothing happens: no hdmi output, no dhcp requests....

Thanks
  Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  Rock64 v3 - POE P1V 3 331 08-18-2019, 05:51 AM
Last Post: mcerveny
  Rock64 board seems defective, how to confirm? Josk 1 71 08-15-2019, 08:24 PM
Last Post: tllim
  Rock64 for video surveillance martinschm 4 211 08-12-2019, 11:55 AM
Last Post: pkfpeters
  Purchase Rock64 V3? richardk 6 439 08-03-2019, 12:56 PM
Last Post: mcerveny
  Rock64 running OMV, how to setup RTL8812AU WiFi? electrosam 2 121 07-16-2019, 04:03 PM
Last Post: ayufan
  Rock64 random freezes BTB 3 195 07-01-2019, 10:17 AM
Last Post: Luke
Sad Rock64 Seafile Installation klaus_nase 2 140 06-27-2019, 09:11 AM
Last Post: klaus_nase
  rock64, compile problems "illegal instruction", "memory fault" -> ddr_333Mhz? hunderteins 5 371 06-22-2019, 12:36 PM
Last Post: redfish
  Another non-booting ROCK64 SuburbanDad 13 662 06-19-2019, 01:48 AM
Last Post: mcerveny
  Plastic storage box for Rock64 matwey 1 113 06-18-2019, 10:56 PM
Last Post: tllim

Forum Jump:


Users browsing this thread: 1 Guest(s)