Pinebook 14 Speaker Volume
#1
Hi,

I just received my PineBook and noticed the speaker don't get very loud.. there is noise coming out from them, but it's very faint. I have to put my ear a few inches away to hear it clearly. I tried turning up the volume on the system and the audio application to full. Has anyone had a similar experience? Does anyone know what might be happening?

Thanks,
  Reply
#2
(06-21-2017, 11:48 AM)mseth Wrote: Hi,

I just received my PineBook and noticed the speaker don't get very loud.. there is noise coming out from them, but it's very faint. I have to put my ear a few inches away to hear it clearly. I tried turning up the volume on the system and the audio application to full. Has anyone had a similar experience? Does anyone know what might be happening?

Thanks,

What is your audio source? I have played YouTube videos and there is plenty of audio volume. Have you tried using the hotkeys (I think they are f3-f5)?
  Reply
#3
Just to make sure, open a terminal and alsamixer, then check AIF1 DAC timeslot 0 volume = ca. 65, DAC Volume = ca. 60 and Speaker Volume ca. 80-90 , those settings usually work for me. Overall the speakers are not super loud and it is better to use headphones/earplugs, but in normal environments you should easily hear something ;-)
Come have a chat in the Pine A64 IRC channel >>
  Reply
#4
I am having the same problem. I need to put my ear to the desk to hear anything.

(06-21-2017, 02:51 PM)macacob Wrote: I am having the same problem.  I need to put my ear to the desk to hear anything.

Xalius' suggested settings fixed my issue.   Thanks!

(06-21-2017, 02:44 PM)xalius Wrote: Just to make sure, open a terminal and alsamixer, then check AIF1 DAC timeslot 0 volume = ca. 65, DAC Volume = ca. 60 and Speaker Volume ca. 80-90 , those settings usually work for me. Overall the speakers are not super loud and it is better to use headphones/earplugs, but in normal environments you should easily hear something ;-)

Extremely helpful!  It isn't exactly booming but I can definitely hear it now.   Thanks!
  Reply
#5
Did work also for me.
After leaving the alsamixer I also used:
sudo alsactl store

for storing this setting permanently Smile
  Reply
#6
(06-21-2017, 02:44 PM)xalius Wrote: Just to make sure, open a terminal and alsamixer, then check AIF1 DAC timeslot 0 volume = ca. 65, DAC Volume = ca. 60 and Speaker Volume ca. 80-90 , those settings usually work for me. Overall the speakers are not super loud and it is better to use headphones/earplugs, but in normal environments you should easily hear something ;-)
Pardon my utter ignorance, but could you be more specific about how to check those parameters. Here's my incomplete instruction list:
* In the Debian menus (upper left) select: /Applications/System Tools/Mate Terminal
* In the terminal enter: alsamixer
* This opens AlsaMixer V1.1.0
* In AlsaMixer: [and here's where I am completely unable to find the three parameters above or a way to set them ... I'd appreciate your help]

Regards,
Jared
  Reply
#7
(07-05-2017, 07:14 PM)JaredF Wrote: 1 In the Debian menus (upper left) select: /Applications/System Tools/Mate Terminal
2 In the terminal enter: alsamixer
3 This opens AlsaMixer V1.1.0
4 In AlsaMixer: [and here's where I am completely unable to find the three parameters above or a way to set them ... I'd appreciate your help]

I've just numbered your above steps so I could keep going...

5 Press the left arrow (as in, the left arrow key on the keyboard!) until you come across AIF1 DAC timeslot 0 volume, and if the value isn't around 65, use the up and down arrows to increase/decrease it.

6 Keep using the left arrow until you get to DAC volume, and then press the up and down arrows to increase / decrease the value to approximately 60.

7 Keep using the left arrow until you get to the Speaker volume (very last entry), and use the up and down arrows to increase / decrease the value to between 80 - 90.

8 If you sound is now working, press esc to exit alsamixer, and run 'sudo alsactl store' to save these settings to file so it is used in the future.
  Reply
#8
(07-05-2017, 08:45 PM)pfeerick Wrote:
(07-05-2017, 07:14 PM)JaredF Wrote: 1 In the Debian menus (upper left) select: /Applications/System Tools/Mate Terminal
2 In the terminal enter: alsamixer
3 This opens AlsaMixer V1.1.0
4 In AlsaMixer: [and here's where I am completely unable to find the three parameters above or a way to set them ... I'd appreciate your help]

I've just numbered your above steps so I could keep going...

5 Press the left arrow (as in, the left arrow key on the keyboard!) until you come across AIF1 DAC timeslot 0 volume, and if the value isn't around 65, use the up and down arrows to increase/decrease it.

6 Keep using the left arrow until you get to DAC volume, and then press the up and down arrows to increase / decrease the value to approximately 60.

7 Keep using the left arrow until you get to the Speaker volume (very last entry), and use the up and down arrows to increase / decrease the value to between 80 - 90.

8 If you sound is now working, press esc to exit alsamixer, and run 'sudo alsactl store' to save these settings to file so it is used in the future.

Ah, thank you. That was simple and effective instruction concerning a counter-intuitive interface. And to add to the instructions

7.5 Keep using the left arrow until you get to headphone volume, and use the up and down arrows to set it to 90 or so.

-J
  Reply
#9
(07-05-2017, 06:44 AM)guidol Wrote: Did work also for me.
After leaving the alsamixer I also used:
sudo alsactl store

for storing this setting permanently Smile

It looks to me that it is not stored permanently (any more).
When I reboot the system, some values are different. I am still investigating on which...

It worked in the past though, at least once!
Mick 
  Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Pinebook Pro (i3 WM): Confirm Shutdown on Power Button etothepii 3 572 08-14-2020, 06:03 AM
Last Post: loblik
  Manjaro sway profile for pinebook e-minguez 3 351 07-21-2020, 03:25 PM
Last Post: jezek
  Reset User or Factory Reset PineBook Linux 11.6" pittman64 1 411 07-07-2020, 11:26 PM
Last Post: tllim
  Pinebook is going the way of Betamax? trigger 9 1,637 06-21-2020, 03:08 PM
Last Post: secristr
  Slarm64 on Pinebook [Slackware Arm - 64 bit] KRT 10 2,335 06-04-2020, 11:31 PM
Last Post: KRT
Information Manjaro ARM for Pinebook erchache2000 75 13,473 05-10-2020, 02:06 PM
Last Post: telle
  pinebook black screen when booting with "different power mode than last used" penzoiders 12 2,462 04-27-2020, 06:27 AM
Last Post: tophneal
  Kali Linux for the Pinebook Luke 1 766 03-03-2020, 05:01 AM
Last Post: e-minguez
  Anyway to run Teamviewer for ARM/Pinebook? Ekkaia 8 4,429 01-16-2020, 08:51 PM
Last Post: dhosh
  Pinebook Wlan Driver does not work properly matze79 2 508 12-15-2019, 02:50 AM
Last Post: matze79

Forum Jump:


Users browsing this thread: 1 Guest(s)