Getting Started | Visit the WIKI | IRC Logs | Forum Rules/Policy


Android 6.0.1 Image (LCD and HDMI Video Output) Release 20170209 [ver 2.0.1]
#11
EDIT: IT WORKS! - THE ONLY THING I DID DIFFERENT WAS USE NOTEPAD++ TO UNCOMMENT THE UENV.TXT FILE RATHER THAN NORMAL NOTEPAD (SORRY IF THAT WAS AN OBVIOUS MOVE? BUT IT WASN'T TO ME (still didnt get the normal v6 lcd/hdmi working though just the ayufen v6). Thanks though

I'm having issues getting this to work with my LCD, Its fine with the HDMI but when i try to boot through LCD the screen does nothing - it seems to work with the older V5.1.1 (8gb) being that it actually loaded but it crashed pretty quickly - though my sdcard is 64gb 
  • I've definitely used the right image
  • testing say my SDcard is fine
  • I'm using the official Pine64 Power supply (although at first the power light went out after a few seconds then once i plugged it into HDMI and it worked then back into LCD the pwer light then stayed on though nothing on screen)
  • nothing extra like the mouse is plugged in
  • all cable definitely connected correctly

this is my first set-up of Pine64 by the way I've been ill so haven't got around to it before now, any ideas? i posted in the new start up forum they suggested i come here..
Backer number #9,952 + KS Funded Jan 23, 2016 + Backerkit funded May 9, 2016

STATUS: RECEIVED,TRACKING NUMBER = PENDING, SHIPPED 27/05/16
Reply
#12
(03-16-2017, 05:40 AM)Workaholic Wrote: tllim

First of all thanks for your efforts.
I tried the 6.0.1 image and it fits to SanDisk 16GB.

But unfortunately, I found the next issues:  Confused
- sometimes it can't boot on power on, so have to cycle the power twice, what is not good for many solutions based on it
- it shows issues with two partitions on the sdcard and suggests to format before use, but can't boot after that anymore (what could be the reason?)
- ES File Explorer (guess others too) works quite slow so that system often informs that "it isn't responding"
- Android keyboard (AOSP) can't be enabled for any languages, so there is English only
- Can't connect to local WiFi network  (endless obtaining IP address) though it works just fine under Android 5

The partition issue is there for me as well.


(03-21-2017, 08:24 PM)jauyzed Wrote: trying to install on pine64 2 gb on a 32 gb card. Etcher is stalling at 96% and rw speeds went down to half. Im not sure if that how it is supposed to be doing?

My etcher is doing the same thing. The last 4% takes 10 minutes. Although the timer says they should take 6 seconds. At the same time the card is switching between showing available storage and not formatted in windows. When it's finished I can't open the card in windows, Etcher validates the card though.

Also:

No audio out from headphone jack for me.
Reply
#13
I connected a little 8Ohm Speaker between Pin 31 and 32 on Euler bus but there is no sound at all. Is there enough power on these output to drive a speaker or do i need a amplifier? Is it right connected this way?? On the headphone jack i get audio!
Reply
#14
(04-16-2017, 12:05 PM)tommypine Wrote: I connected a little 8Ohm Speaker between Pin 31 and 32 on Euler bus but there is no sound at all. Is there enough power on these output to drive a speaker or do i need a amplifier? Is it right connected this way?? On the headphone jack i get audio!

  Driving an 8ohm speaker does not use much power at all. Make sure you have the sound enabled in settings.
Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  Android 6.0 Tablet and TV (release candidate, maintained) ayufan 190 26,330 04-21-2017, 07:54 AM
Last Post: Bob123456789
  Orange Screen All versions of Android TV XsoundXhoundX 16 1,118 04-19-2017, 02:31 AM
Last Post: kenjiru
  How to Make a Pine with Android 7.0 Stay on All the Time? Bob123456789 3 221 04-05-2017, 01:12 PM
Last Post: Bob123456789
  HDMI Color Inverted on TV Apicalis 2 314 03-28-2017, 10:33 AM
Last Post: lyhaku
  Android 7.1 Tablet and TV (alpha, proposal) ayufan 16 4,169 03-17-2017, 05:02 AM
Last Post: xalius
  i2c in android Skivholme 0 179 03-09-2017, 06:24 AM
Last Post: Skivholme
  Change Android boot logo? ipsw 4 977 03-07-2017, 09:47 AM
Last Post: joe
  GPIO access running Android rddragon888 19 2,294 03-07-2017, 04:45 AM
Last Post: MarkHaysHarris777
  Supported 4:3 and 16:10 resolutions over HDMI on Android karlitos 26 4,136 03-06-2017, 03:59 PM
Last Post: dikov
  is there a good place to learn how to compile a release rxb 0 147 02-07-2017, 06:38 PM
Last Post: rxb

Forum Jump:


Users browsing this thread: 1 Guest(s)